Blackhunter deepfinders reverse engineering

[mustefa ubram]

hi to all Friends

Today I encountered a strange problem in the Black Hunter device After removing part of the resin, I saw a piece that I had never seen before.A capacitor-like piece inside which was a coil with a silver core.The coil inside the tank was completely filled with silver powder And its output was connected to the antenna.Can you explain this to me? What is the reason for this?

[kostas87]

hi to all Friends

Today I encountered a strange problem in the Black Hunter device After removing part of the resin, I saw a piece that I had never seen before.A capacitor-like piece inside which was a coil with a silver core.The coil inside the tank was completely filled with silver powder And its output was connected to the antenna.Can you explain this to me? What is the reason for this?

Hi, thanks for the machine info. basically you didn't mention the output frequency and the form of oscillation, wave,? square? . in a previous post you mentioned that it goes up and down like a frequency generator? what is the origin of the frequency and what is the peak? make a diagram where the capacitor was in the circuit, how many turns the coil has inside the capacitor..and confirm the metal inside the capacitor shell..it is definitely silver ?

[mustefa ubram]

Hi, thanks for the machine info. basically you didn't mention the output frequency and the form of oscillation, wave,? square? . in a previous post you mentioned that it goes up and down like a frequency generator? what is the origin of the frequency and what is the peak? make a diagram where the capacitor was in the circuit, how many turns the coil has inside the capacitor..and confirm the metal inside the capacitor shell..it is definitely silver ?

Dear friend, I explained about frequency and output waveform in the above posts.This part is not a capacitor. It looks like a capacitor.10 turns of 0.3 wire was wrapped on a silver core with a diameter of 3 mm.
Yes, I am pretty sure that the coil was sealed with silver powder inside a chamber

[kostas87]

Dear friend, I explained about frequency and output waveform in the above posts.This part is not a capacitor. It looks like a capacitor.10 turns of 0.3 wire was wrapped on a silver core with a diameter of 3 mm.
Yes, I am pretty sure that the coil was sealed with silver powder inside a chamber

Thanks for your answers 👍
sorry for the many questions..have you had any success with silver with this device?

[mustefa ubram]

Thanks for your answers 👍
sorry for the many questions..have you had any success with silver with this device?

In several points that were related to the test, he easily determined the targets from a distance

[kostas87]

In several points that were related to the test, he easily determined the targets from a distance

We know that with a sample and in a specific way a noble metal can be sampled and detect the same metal with the distance method. some here also called it molecular detection. I think the operating frequency is very important as well as the (area) where we will put the metal sample. The area that is a metal buried too long has the ability to create a corresponding reflection of a frequency with the sample you have placement. there are many ways to detect this anomaly, the method here is different because there is no signal receiving device just two rod downing.

[mustefa ubram]

We know that with a sample and in a specific way a noble metal can be sampled and detect the same metal with the distance method. some here also called it molecular detection. I think the operating frequency is very important as well as the (area) where we will put the metal sample. The area that is a metal buried too long has the ability to create a corresponding reflection of a frequency with the sample you have placement. there are many ways to detect this anomaly, the method here is different because there is no signal receiving device just two rod downing.

How to take a sample of a noble metal with a sample and in a special way and recognize the same metal at a distance?

[Mike(Mont)]

Got to LRLMAN YouTube channel there is a video titled ?Dowsing Ring Theory? . Hee we ecc C plains how to determine the frequency of an object.

[ma330]

I sent a lot of emails to Deep Finders for a long time.Unfortunately, I did not receive any answer.When the company does not respond to your emails and calls, the credibility of that company should be doubted.I was very interested in buying the Black Hunter device, but unfortunately, there is no such device in the market anymore.I contacted several people who sell metal detectors and they all said that we have this device in old form and I cannot trust such a device.I need a non working black hunter if anyone can guide me