Best than your Raven!

[Esteban]

Hi, wasting my time with remote sensing, now via light = antenna.

[Qiaozhi]

Hi, wasting my time with remote sensing, now via light = antenna.

It will never work.

[Esteban]

It will never work.


Hu!!! I feel trembling!

[Seden]

Your close Esteban!

Esteban,

Well your getting warmer (ah no pun intended). You need to go down to 1.2mm for gold according to the careful experiments of the German Physicist Dr. Paul E. Dobler. I've looked into building an antenna using printed circuit board technology but I don't know if it can be done (Carl, whadda think?). I know their currently using the method used to lay down the traces for IC's for various mm antennas,hmm.

I've also gotten books on Spectroscopy and at the light frequencies your looking at Molecules if I'm not mistaken,Carl would know. I've also gotten a rectifier tube that is doped with radioacitve material that some Amatuer Radio Operators have been using for 100 GHZ that might be able to detect 1.2mm as it's around 240GHZ I think. Been awhile since I looked into this so that's why I'm unsure but pretty easy to convert 1.2mm to Frequency.

Dr. Dobler found out that these frequencies can travel more than just a few cm. Check out the British StarTiger project and the pics I've seen where the Russians have a mm camera mounted in a tank and it showed what a mm photograph looked like of underground objects from a several hundred feet away from the tank-very cool technology!


Randy

[Esteban]

How is the lenght in mm of IR light 940 nm? Is 9.4×10-4 mm. If you transmitt IR light, for a "strange" motive the phenomenom "walk" in the light and detection occurs. The IR method is one of the more effective and precisse I have experimented, and laser IR will be better in distance. This IR light must be modulated in low frequency. So, this is a "train" of short antennas. Simple: if you can transmitt audio, voices, etc., via IR, also of course you can receive the "phenomenom".

In this theme I have some question for people in this forum who knows more than me regarding electronics.


This is one of my IR projects:

[Geo]

Hi Esteban . What is this? Tell me more i believe you.
Qiaozhi don't believe at these devices (sorry Quaozhi)
Regards

[Qiaozhi]

Hi Esteban . What is this? Tell me more i believe you.
Qiaozhi don't believe at these devices (sorry Quaozhi)
Regards

You are correct. I do not believe.
But I do respect Esteban's efforts at experimentation. Who knows, one day he may prove me wrong.

What I don't like is empty rhetoric, and pictures of men standing in holes with no treasure in sight. I also do not believe when I see someone proudly displaying an item that was claimed to have been dug up from some ludicrous depth. The chances are that it actually came out of their own pocket.

Esteban - please keep at the experiments. I truly am interested. Even though personally I'm staying with known good technology and standard scientific principles, not made-up pseudoscience.

[robert]

Sorry....


Esteban:
"Simple: if you can transmitt audio, voices, etc., via IR, also of course you can receive
the "phenomenom". "
Yes you can tx MODULATED audio via IR......on very SHORT range. Other words TX and RX should
be very close....few meters but NO MORE!
On RX side you should have DEMODULATOR....
THERE IS NOT any ANALOGY in this (IR principles) with any kind of long range detection..?!
How, the hell, you gonna detect any kind of metal with IR ???!??
Esteban, you put eneormous effort to acquire something....but with very wrong idea..sorry!
Seden, those ultra high freq. can not penetrate in any material. Also have very short range,
other words need ultra-high power TX to reach some range, also need visibillity between TX and
RX points...etc..etc...
For example try to examine SAT equipment and how it works....

Esteban:
"If you transmitt IR light, for a "strange" motive the phenomenom "walk" in the light and
detection occurs."
Very WRONG! "Detection" occurs only when you "walk" in the line between TX and RX and "brake"
continous reception of RX......thats how some type of "walk through" IR detectors works.....
There is a type of industrial IR "detector" usually mounted on some product line in purpose
of counting products.....nothing else....
Also you may build simillar and put at your front door...so when person approach to door,RX
receprion will brake and alarm can warn you inside the house...just an example...

Quiaozhi: "It will never work."

Yes! Of course! It will never work!
Esteban, looking at your pistures here...huh! Again FM radio (cheap,unstable one) very funny
connected in very funny "project".....
Also you used ordinary photo transistor as "sensor"...? Detect what??? Light?
Esteban do not waste your time with those. Since you have very good will to experiment,than
why dont you take some already proven IB MD project and further experiment with it. At least
you may gain better performances by experimenting with it.
If you continue with this subject, you are in a danger to complete loose yourself in those.
You gonna spend years in those without any success....
Also you are in a big danger to fill up you head with a lot of prejudices about this stuff...
Somehow, i feel very sorry for you....

[Esteban]

Sorry!

I want to follow your advices , but my knowledges on certain topics do not allow me. If you want to limit me... you're the wrong!

Of course, also I build IB machines, two boxes and others. Fu!!!! since 25 years.

This explanation (?) nothing to do about what I want to said. Sorry for you :

Yes you can tx MODULATED audio via IR......on very SHORT range. Other words TX and RX should
be very close....few meters but NO MORE!
On RX side you should have DEMODULATOR....
THERE IS NOT any ANALOGY in this (IR principles) with any kind of long range detection..?!
How, the hell, you gonna detect any kind of metal with IR ???!??
Esteban, you put eneormous effort to acquire something....but with very wrong idea..sorry!
Seden, those ultra high freq. can not penetrate in any material. Also have very short range,
other words need ultra-high power TX to reach some range, also need visibillity between TX and
RX points...etc..etc...
For example try to examine SAT equipment and how it works....

Esteban:
"If you transmitt IR light, for a "strange" motive the phenomenom "walk" in the light and
detection occurs."
Very WRONG! "Detection" occurs only when you "walk" in the line between TX and RX and "brake"
continous reception of RX......thats how some type of "walk through" IR detectors works.....
There is a type of industrial IR "detector" usually mounted on some product line in purpose
of counting products.....nothing else....
Also you may build simillar and put at your front door...so when person approach to door,RX
receprion will brake and alarm can warn you inside the house...just an example...

Quiaozhi: "It will never work."

Yes! Of course! It will never work!
Esteban, looking at your pistures here...huh! Again FM radio (cheap,unstable one) very funny
connected in very funny "project".....
Also you used ordinary photo transistor as "sensor"...? Detect what??? Light?
Esteban do not waste your time with those. Since you have very good will to experiment,than
why dont you take some already proven IB MD project and further experiment with it. At least
you may gain better performances by experimenting with it.
If you continue with this subject, you are in a danger to complete loose yourself in those.
You gonna spend years in those without any success....
Also you are in a big danger to fill up you head with a lot of prejudices about this stuff...
Somehow, i feel very sorry for you....

[diminute]

Pues yo no estaría tan seguro

Esteban:

Te propongo que no dejes de investigar sobre tu idea !!!

Hace muchos años parecía que el espacio y el tiempo eran absolutos, hoy eso ha cambiado y es la velocidad de la luz lo que parece ser absoluta.

Aun cuando tu objetivo no se alcance estoy bastante seguro que muchas cosas nuevas aprenderas y sabe Dios a que conclusión llegarás, vaya talvés tu método sirva un día para curar el cancer... entonces habrás llegado a un resultado mucho más importante que descubrir el más valioso de los tesoros.

Los buenos resultados son de los que persisten y experimentan cada día, perfeccionando los metodos y refinando cada meta.

Creo que nadie tiene tanto conocimiento como para tener la verdad absoluta en sus manos, por eso cada persona tiene el derecho y la posibilidad de llegar a un resultado que nunca se haya visto.

He notado que llevas mucho tiempo estudiando y experimentando cosas sobre detectores, no nos queda más que esperar de usted un resultado muy interesante, tengo confianza en que lo obtendras... talvés hasta más pronto de lo que usted mismo supone.

Saludos

diminute

[Esteban]

Gracias

Diminute, gracias por tus palabras. El que no quiere ver. no ve. Pero el que intenta ver, puede que alcance a ver algo...


Diminute, thank for your words. The one that does not want to see, it does not see. But the one that tries to see, maybe see something...

[Seden]

Message for Diminute

Diminute,

why are you masking your message in Spanish so the rest of the forum readers can't understand it?

This forum is for English as it is the universal language and frankly I would like to enjoy reading what you have to say as a forum member.

Gracious Senior

Randy

[diminute]

Wrong

I wrote my post in spanish cause it was direct to Esteban,

Esteban read spanish very good, but i'm sorry my friend...

All languaje are important, not only english.

I refered to Esteban that he continue your investigations, he is showing some result to us, but some people here believe that they have the absolute truth in your hands. No body has this privilegy, only Got.

There's at this forums much more message with offensive significant that the my. I respect everybody here, i consider my friends for all you.

Sorry for my bad english, Esteban can traduce my msg to him... he has the hability to write in both languaje.

Thanks for all, diminute

[Seden]

Thoughts for Diminute and forum

Diminute,

Please don't be shy about your English skills as we've got people from Europe on this forum I'm sure struggle too but us English speakers appreciate any attempts and will not look down on you. If I were to join a Spainish speaking forum you'd best believe I'd be using the Google Babel Fish for translation both ways if I had too.

But I am proud of Esteban for all the circuits he's built and tested. I love designing but HATE building circuits. I guess it stems from the my early years in the electronics industry when first starting College having to wirewrap and point to point wiring in an Engineering Lab,really burnt me out and somehow I've got to get past those bad memories so long ago.

Esteban I will freely share with you and everyone else what my next project is cause I don't care about making a product out of it (LRL MFG.'s take notes). I've found a company that still sells paints made from Zinc Sulphide and Zinc Sulphoselenide called Winsor-Newton. As you all know Zinc Sulphide was used in the early Crt'S and it responds to IR. Just for fun I'm going to paint it on the face of a Phototransistor and place 1.2mm wires in a square pattern (read at right angles to each other),place it in a small black plastic light proof box and see if I can detect the extremely small voltage nodes on the full wave dipole-ditto for the Zinc Sulphoselenide that responds to varying electric fields that would not create a high enough voltage to be visible as it takes alot for this material.
Yeah this is a long shot but why not? I'm also going to try putting a doughnut magnet to see if that makes any differance.

Another experiment that would be interesting would be to use a neon bulb doped with Radium paint scrapped off an old watch to encourage it to fire in the current starvation mode.
I don't know if anyone has seen the article by Dr. Harry E. Stockman in the Feb.1980 issue of Ham Radio, but he was the one that introduced using a neon bulb for a Ghz receiver complete with schematic (type in "Plasma Diode Experiments"on google as that was the title).
Then an australian Ham VK2ZAY wrote an updated,improved version in the article "Plasma Diode Detector" complete with schematic as he had trouble with the hiss noise that the current starved neon bulb produces.
And my last idea based on Dr. Paul E. Doublers book is to make a either a PCB yagi or Slot Array for 1.2mm and couple it to a pressure sensor. The most sensitive one I can think of right off would be a air dielectric capacitor that is sealed and has a thin plate on the side that faces either the dipole or slot antenna feed.

I welcome your comments as these are "seat of the pants" ideas,

Randy

[robert]

Yiak,Yiak,Yiak!!!


"...This explanation (?) nothing to do about what I want to said. Sorry for you ..."

Ha,ha,ha !!! Whenever you meet REAL FACTS, you have simillar nonsenced answer!?
So, what ,the ****, you wanted to say at the first place????
So much claims,nonsences....at the end NOBODY UNDERSTOOD AT ALL YOUR POINTS???
What is your point? What are you trying to explain here?
For example here is your post:
************************************************** ********************************
"How is the lenght in mm of IR light 940 nm? Is 9.4×10-4 mm. If you transmitt IR light,
for a "strange" motive the phenomenom "walk" in the light and detection occurs. The IR
method is one of the more effective and precisse I have experimented, and laser IR will
be better in distance. This IR light must be modulated in low frequency. So, this is a
"train" of short antennas. Simple: if you can transmitt audio, voices, etc., via IR, also
of course you can receive the "phenomenom".
In this theme I have some question for people in this forum who knows more than me regarding
electronics...." blah,blah,blah....
************************************************** *********************************

SO,ESTEBAN, WHAT WAS THE POINT HERE????????? WHAT DID YOU WANTED TO SAY HERE?????
Many of your posts are very simillar; blah,blah,IR,IR and IR, than...FM,VHF...IR
secrets...blah,blah..."brake".....blah,blah....??? !????
What are your secrets Esteban???? Why, the hell, you are posting such misterious
posts, when at the same time you do not want to explain points and ideas...or you do
NOT HAVE A CLUE AT ALL ABOUT YOU ARE TALKING AT FIRST PLACE ??? HA,HA,HA,HA....
No, I DO FEEL A REAL SORRY ABOUT YOU MAN! IT SEEM S THAT YOU ARE LOST FOR GOOD!
Maybe Hung should use his famous FG80 to find you....Heh!
Pay attention on this:
"....This IR light must be modulated in low frequency....."
HA,HA,HA,HA,HA,HA,HA,HA,HA,HA,HA !!!!!!!!!!!!!!!!!!!!!!!!!!!
Shame on you Esteban! You do not have even elementar knowledge at all!!!
GOOD BYE!!!!

HA,HA,HA..!!!!!