Post photo of your LRL project?

[Geo]

Hi all,
Morgan, I wish you have not made mistake in reflection the original circuits otherwise all other things reach to nowhere.
Really thanks to you for your efforts in trying this effort.
Really thanks to others; Max, Fred and Qiaozhi for consequent leadings in making the schematic.
Especial thanks to Max for full schematic.
Especial thanks to Geo for some of his leadings at least to me for wire wraping manner.
Morgan you really didn't need to make 6 separate PCBs, thanks to Max; with Max schematic blessing you can assemble all in one single board like I did. unfortunately electronic is not my profession at all and I'm high and dry in this, but I love treasure seeking and detection.
now the most problem for me is wire wrapping and how to make it. I'm entering in second phase.
in god providence and friends helps here I go ahead.
any help and leading here will be seriously appreciated. after that I will put all my obtained in your access.

Good luck Michael

[Morgan]

LRL

Hi all,
Morgan, I wish you have not made mistake in reflection the original circuits otherwise all other things reach to nowhere.
Really thanks to you for your efforts in trying this effort.
Really thanks to others; Max, Fred and Qiaozhi for consequent leadings in making the schematic.
Especial thanks to Max for full schematic.
Especial thanks to Geo for some of his leadings at least to me for wire wraping manner.
Morgan you really didn't need to make 6 separate PCBs, thanks to Max; with Max schematic blessing you can assemble all in one single board like I did. unfortunately electronic is not my profession at all and I'm high and dry in this, but I love treasure seeking and detection.
now the most problem for me is wire wrapping and how to make it. I'm entering in second phase.
in god providence and friends helps here I go ahead.
any help and leading here will be seriously appreciated. after that I will put all my obtained in your access.

Hello

I apreciate all your work in this PCB,and i can say that its maybe better than my 1,2,3,4,5,6 PCB´s.
Good luck with ferrite and antenna. I´m sure your new device will put your Mineoro FG80 in hollydays for long time !!!

Kind regards

[Morgan]

Hung LRL ???

Much more useful than you think!!
Pistol detector at the time it was being built.
Original Sonalarme buzzer and vintage tantalum capacitors.

Hello Hung

I see you already made one Pistoldetektor for you.Its very nice,but tell me why you need it if you have the fantastic and powerfull Mineoro FG80,why you need to find single gold coin at 8 meters distance with PD if you can find it with FG80 at 70meters distance ?...


Regards

[aft_72005]

x field strength meter???

Hi marisviens
What is it?
Are you know more about it?
Regards.

[hung]

Hello Hung

I see you already made one Pistoldetektor for you.Its very nice,but tell me why you need it if you have the fantastic and powerfull Mineoro FG80,why you need to find single gold coin at 8 meters distance with PD if you can find it with FG80 at 70meters distance ?...


Regards

Hi Morgan,

You're right.
I just decided to replicate it to try to enhance it. I said in the past that as I'm deeply involved in the finishing on my own LRL system, I would investigate the PDC later. But the device you presented has the advantage of being able to be copied from the beginning thanks to the great job you did in showing the details. Unlike the PDC which has lots of circuits filled with resin. And I don't want in any way to run the risk of ruin it.
Besides, the pistol detector will be a good project to try our discoveries and developments we reached with our LRL system. But first the pistol has to be replicated with the highest fidelity possible.

PS. Recheck your switch connections as the way it is shown may lead to errors in replicating them.

Regards.

[Morgan]

FERRITE

Hi Morgan,

You're right.
I just decided to replicate it to try to enhance it. I said in the past that as I'm deeply involved in the finishing on my own LRL system, I would investigate the PDC later. But the device you presented has the advantage of being able to be copied from the beginning thanks to the great job you did in showing the details. Unlike the PDC which has lots of circuits filled with resin. And I don't want in any way to run the risk of ruin it.
Besides, the pistol detector will be a good project to try our discoveries and developments we reached with our LRL system. But first the pistol has to be replicated with the highest fidelity possible.

PS. Recheck your switch connections as the way it is shown may lead to errors in replicating them.

Regards.

Hello

Yes,this time you are rigth,i made some mistake with wires and switch connections,my spanish friend say the PD not work if he disconect the 3 wires from Ferrite,so you are absolutly correct,WE NEED PCB 5 AND FERRITE !!!
If you have good knolenge with electronics can you tell me if its possible to put 22mF electrolitic capacitors,because i can´t find Tantalum capacitors.
your Pistoldetektor is already working? If yes,tell me the performance.
Unfortunly GEO device its working maybe 10 %...And i think my device will have serious problems to put to work,i think i made big mistakes with capacitor values.If your PD works better can you help us here?!
Good luck with your project!

Regards

[Morgan]

FERRITE & PCB 5

Hi all,
Morgan, I wish you have not made mistake in reflection the original circuits otherwise all other things reach to nowhere.
Really thanks to you for your efforts in trying this effort.
Really thanks to others; Max, Fred and Qiaozhi for consequent leadings in making the schematic.
Especial thanks to Max for full schematic.
Especial thanks to Geo for some of his leadings at least to me for wire wraping manner.
Morgan you really didn't need to make 6 separate PCBs, thanks to Max; with Max schematic blessing you can assemble all in one single board like I did. unfortunately electronic is not my profession at all and I'm high and dry in this, but I love treasure seeking and detection.
now the most problem for me is wire wrapping and how to make it. I'm entering in second phase.
in god providence and friends helps here I go ahead.
any help and leading here will be seriously appreciated. after that I will put all my obtained in your access.

Hello Michael,Max,GEO,Fred

unfortunly i made some mistake when copy switch connections from original Alonso LRL !
I was advertise that we need FERRITE & PCB 5 working to get good results with Pistoldetektor!
SORRY i´m not good enough in elektronika...
I will try to solve the problem when meet again with my friend the owner of this device...

Regards

[michael]

Hi.
Morgan if it's the case, what a bad.
please try to rewise it if you are serious to have a copy of that and to
share worthy experiences all to each other. Try your best to catch the device again.
Thanksgivings

[hung]

If you have good knolenge with electronics can you tell me if its possible to put 22mF electrolitic capacitors,because i can´t find Tantalum capacitors.
Regards

Maybe.
But I don't know if in this particular case the electrolytics will hold as stable as the tantalums. He employed 25V caps (yellow). I used 35V (brown) for more 'room'.
I'm surprised you're having a hard time to find them in Europe.

[Fred]

Maybe.
But I don't know if in this particular case the electrolytics will hold as stable as the tantalums. He employed 25V caps (yellow). I used 35V (brown) for more 'room'.
I'm surprised you're having a hard time to find them in Europe.

For a stabilised 9V power supply there is more room than you need
Tantalum have the bad habit to go in short and blew everything there is above them, i hate them...
Fred.

[Morgan]

Andreas Pistoldetektor

Hi.
Morgan if it's the case, what a bad.
please try to rewise it if you are serious to have a copy of that and to
share worthy experiences all to each other. Try your best to catch the device again.
Thanksgivings

Hello
Yes,i will do this as soon as possible.
Until now the best result is from Andreas PD, air test Euro coin 25 cm and metalic dor 4,80 m...Anyway is not using PCB 5 & Ferrite,device its only at 50 % of the original,but much better results than GEO and Fred.
Good luck!

Regards

[Max]

Hello Michael,Max,GEO,Fred

unfortunly i made some mistake when copy switch connections from original Alonso LRL !
I was advertise that we need FERRITE & PCB 5 working to get good results with Pistoldetektor!
SORRY i´m not good enough in elektronika...
I will try to solve the problem when meet again with my friend the owner of this device...

Regards

Hi,
I think someone told you some bad information about ferrite thing: it is off when other stuff is on... so you'll never use it when use the circuit2 stuff etc.

Maybe is some joke...

Don't care of who told you that ferrite is essential for success with PD cause it's , from schematic we have , impossible.

Just wire up things to have all powered and just forget about ferrite circuit.

Kind regards,
Max

[Max]

Hello
Yes,i will do this as soon as possible.
Until now the best result is from Andreas PD, air test Euro coin 25 cm and metalic dor 4,80 m...Anyway is not using PCB 5 & Ferrite,device its only at 50 % of the original,but much better results than GEO and Fred.
Good luck!

Regards

Hi,
yes true... Andreas made great work I think... but remember: the original case for coils was 4'' so 10cm only and less in the inner part , right ?

Then original coils of PD must be under 10cm size and not 12cm like in Andreas model.

It's easy detecting 1eur at 25cm with a PI detector and a 12cm diameter coil for example... but not so easy getting the same results with a smaller coil.

That means original coils are somehow "special" if you can get, with smaller thing, e.g. 10eur-cent at 50cm ! ENORMOUS DISTANCE FOR SUCH SMALL THING AND COILS!

Kind regards,
Max

[Esteban]

Hi,
I think someone told you some bad information about ferrite thing: it is off when other stuff is on... so you'll never use it when use the circuit2 stuff etc.

Maybe is some joke...

Don't care of who told you that ferrite is essential for success with PD cause it's , from schematic we have , impossible.

Just wire up things to have all powered and just forget about ferrite circuit.

Kind regards,
Max

In the first model, for long range detection works the two in one position of the switch, but in other position you disconnect ferrite and use as normal MD for to search the item in the revolved sand.

[Max]

In the first model, for long range detection works the two in one position of the switch, but in other position you disconnect ferrite and use as normal MD for to search the item in the revolved sand.

Hi,
yes... but if schematic is correct, the Morgan's PD is different and he gets ferrite circuit off when other stuff is on. So ferrite does nothing... at least... seems that way on Morgan's PD with that schematic.

In other kinds I don't know... and maybe the two things work at same time... possible, but I don't know which kind of increased value can give the ferrite receiver there.

Kind regards,
Max