Post photo of your LRL project?

[hung]

I posted the picture with the indication because I think anyone with a minimum 'atentive eye' would understand what I mean. This is a 2P3T switch with definite internal wirings. There are two elements in Morgan's descriptions which attest the mistakes.

But the atittutdes of notorious 'characters' here never change. And this makes harder each time for me, feeling like contributing without the idiotic jokes the same circus people insist to pose in their neverending show.

So if you want any help from me, stop being a child and act like an adult now.
If you don't need it and think I'm wrong, alright.
Move on and good luck.

[Fred]

This is a 2P3T switch with definite internal wirings.

Yes, very common switches, lots of wires inside.And a few diodes.

There are two elements in Morgan's descriptions which attest the mistakes..

Yes, he says "in postion 3 the PD does nothing".Obvious.

But the atittutdes of notorious 'characters' here never change..

I knew sometime someone would call me "notorious character" Thank you Hung.you´re my man, gimme a kiss!

And this makes harder each time for me,.....

It must be dificult to be a hero.I hope your telents will be recognised some day.

So if you want any help from me, stop being a child and act like an adult now...

We have never got any help from you.Even here your are just saying that there is a secret somewhere but you dont say what it is.As usual.
So no thanks, no need for it.
But i am sure you will come back anyway with your technical nonsense when you fell the need to mislead us, as usual.

"Move on and good luck" too.


Fred.

[michael]

Hi,
Hung, what do you mean of mistake? which part exactly has connection on your opinion?
do you mean some horns of switch has soldered each other?

[Morgan]

My PCB´s

Hi,
Hung, what do you mean of mistake? which part exactly has connection on your opinion?
do you mean some horns of switch has soldered each other?

Until now i finish the 6 PCB,and very soon the Antenna...

[Geo]

I posted the picture with the indication because I think anyone with a minimum 'atentive eye' would understand what I mean. This is a 2P3T switch with definite internal wirings. There are two elements in Morgan's descriptions which attest the mistakes.

But the atittutdes of notorious 'characters' here never change. And this makes harder each time for me, feeling like contributing without the idiotic jokes the same circus people insist to pose in their neverending show.

So if you want any help from me, stop being a child and act like an adult now.
If you don't need it and think I'm wrong, alright.
Move on and good luck.

Hi Hung....
Where are you!!!!
I took all your help from your emails, so i don't need other help.... Thanks

So now You "Move on and good luck".

[chariot]

laser

Hi Everybody,
Good day to you all, does anybody here already tried to use this one?

http://knouzm.net/content/view/305/98/lang,en/

or knows how to build?

Hoping for your kind reply. thanks!

[J_Player]

Hi,
Hung, what do you mean of mistake? which part exactly has connection on your opinion?
do you mean some horns of switch has soldered each other?

Hi Michael,
Hung says mistake because he sees some extra terminals on the switch that are not used. He says these unused terminals are reason for everybody making a mistake to believe the ferrite is disconnected when the omega is turned on.

But don't worry. All the electrical engineers and other people who know how to wire a switch know there is no mistake. You can see for yourself when you connect the switch as shown in Max schematic that omega will work fine with no ferrite circuit attached. hung also knows there is no mistake in the switch. If he really knew a mistake then he could show a diagram of the wrong wiring and the needed change for how to make correct wiring. But he can't show which switch contacts are wrong because there is no mistake.

The ferrite and the omega are two separate detectors that can work without each other. Or they can be put into the same pistol like we see in the Morgan pistol. The switch in the Morgan pistol is wired so it will turn off the ferrite when the omega is turned on. And it will turn off the omega when the ferrite is turned on. This will allow Morgan to use only the omega, or only the ferrite, but not both at the same time. By using this switch, a person can carry two separate detectors inside one pistol, but use only one at a time. Much better than carrying two separate pistols.

There were other pistol detectors made by Alonso and Esteban that were wired to put power to both the ferrite detector and other detector at the same time. But the Morgan pistol detector is not one of those.

Good luck with your pistol detector project, and don't worry about switch.
J_P

[hung]

This is what Morgan said:
Yes,this time you are rigth,i made some mistake with wires and switch connections,my spanish friend say the PD not work if he disconect the 3 wires from Ferrite,so you are absolutly correct,WE NEED PCB 5 AND FERRITE !!!

CAN YOU READ?

This is what the owner of the device told him.

Anyway, I will tell what I think the mistakes are for Michael, Morgan, etc. in PM if they think it's relevant. If not, that's ok and I wish luck to them. I already have my thing together.
I think people like you, Fred and others who along the line provided lots of mistakes in schematics and misleadings and also who has not soldered a miserable component yet don't need to know.
So if they wish this info they can PM me.

You and the others won't certaily bother.

Got it?

[Fred]

I think people like you, Fred and others who along the line provided lots of mistakes in schematics and misleadings and also who has not soldered a miserable component yet don't need to know.

At least WE have provided something:The schematics that you used to build (?) your PD

Fred.

[michael]

Hi all.
Thank you J-Player for your attentions man. encouraging.
Hung, man, if you have some notes or points please put here to be shared with all it will accelerate promotions when be in common consult it's better for all of us.
we are all here to give hand each other, please don't deprive all, if know one thing. Thanks in advance.

one question from Morgan;
had you tested your ohm-meter about offset and subtract the number?
e.g. for round coil(Rx) you said RES for red-white 4.5 ohm, red-shield 2.5 ohm and white-shield also 2.5 ohm, had you considered it? I.e. with consideration the offset (e.g. 0.9) real numbers become 3.6, 1.6 and 1.6 ? and as well for other read digits in all wirings?
BTW; Morgan, If you need I will Send for you my single hand-drawn PCB based on Max single full schematic.
you need non of these wires. those will increase the risk of mistakes. my PCB albeit is not much neat but is correct. I checked and rechecked it frequently and all connections are right.

[Morgan]

Mineoro made in USA

Hi all.
Thank you J-Player for your attentions man. encouraging.
Hung, man, if you have some notes or points please put here to be shared with all it will accelerate promotions when be in common consult it's better for all of us.
we are all here to give hand each other, please don't deprive all, if know one thing. Thanks in advance.

one question from Morgan;
had you tested your ohm-meter about offset and subtract the number?
e.g. for round coil(Rx) you said RES for red-white 4.5 ohm, red-shield 2.5 ohm and white-shield also 2.5 ohm, had you considered it? I.e. with consideration the offset (e.g. 0.9) real numbers become 3.6, 1.6 and 1.6 ? and as well for other read digits in all wirings?
BTW; Morgan, If you need I will Send for you my single hand-drawn PCB based on Max single full schematic.
you need non of these wires. those will increase the risk of mistakes. my PCB albeit is not much neat but is correct. I checked and rechecked it frequently and all connections are right.

This one made in USA !!!
Dont forget,if you need the best car in the world buy the EDSEL !!!

[Morgan]

About the OMEGA coil i check twice and all ok,its low resistenc,so not a lot of wiring.
About the switch,its a mistery.
When i finish my device i will made tests in buried gold medal (20 years underground).
We will see if we made the clone or not...

Regards

[hung]

At least WE have provided something:The schematics that you used to build (?) your PD

Fred.

I did not follow the schematic.

[Fred]

I did not follow the schematic.

[J_Player]

About the OMEGA coil i check twice and all ok,its low resistenc,so not a lot of wiring.
About the switch,its a mistery.
When i finish my device i will made tests in buried gold medal (20 years underground).
We will see if we made the clone or not...

Hi Morgan,
There is no mystery to the rest of us about the switch. We see there is no error because the pistol detectors that have been built are working. You will also see your pistol detector working if you make a ground connection from the board-1 to board-2 and board-3. These ground connections were lost on your circuits because they were carried from board-5 which you removed.

We all know the 6-board pistol project will stop working when you remove the ferrite wires. The reason is not because the ferrite is needed, and it is not because you made a mistake with the switch connection. The reason is because the ground connection on the board-2 and board-3 are connected to the ground on board-5. When you remove board-5 ferrite, then you must replace the ground connection you are removing with a jumper wire to send the ground from board-1 to the ground on boards-2 and board-3 ground like the others who built working circuits without the ferrite.

You can see your pistol detector project working today if you connect a ground wire from board-2 and board-3 to the ground on board-1. No waiting for ferrite necessary, no mystery for the switch.

Best wishes,
J_P