paper money?

[Mike(Mont)]

Someone sold a device to the gov't that can detect a specific chemical in paper money from several? feet away. I can't recall but I think it was a component of the green ink.

Here is a small article on it.

http://www.assetprotectioncorp.com/cashdetectors.html

[Fred]

I wonder why the Government didn´t buy a pair of brazing rods instead

[Esteban]

Here simple dollar tester useful for to detect magnetic characters in bills

[Clondike Clad]

detection of money

Here simple dollar tester useful for to detect magnetic characters in bills

This only works on money with the magnetic strip and not all money have this.( if this will detect bills at 2 meters we would have something.)
One key to a fake LRL is detector that picks up paper money or diamonds.

[Esteban]

This only works on money with the magnetic strip and not all money have this.( if this will detect bills at 2 meters we would have something.)
One key to a fake LRL is detector that picks up paper money or diamonds.

Yes, you're right! You need a small sample chamber (empty glass fuse) and put inside, for example, part of 1 US$ bill in very small cut pieces (but if you prefer destroy a US$ 100 bill, is your problem) .

In this chamber is a coil (1,000 tuns fine wire) wich "noses" the molecules of bill, similar in the sample. Maybe also can helps a source of HV (1,000 V). There are oscillator, filter at oscillator frequency, multiplier of frequency, amplifier with sensibility control and audio system.

Also you can use a xtal oscillator and put the sample in one face (nude xtal). This is similar to technic used in microbalance detector for molecule of explosives and others.

Regards

[Theseus]

Yes, you're right! You need a small sample chamber (empty glass fuse) and put inside, for example, part of 1 US$ bill in very small cut pieces (but if you prefer destroy a US$ 100 bill, is your problem) .

In this chamber is a coil (1,000 tuns fine wire) wich "noses" the molecules of bill, similar in the sample. Maybe also can helps a source of HV (1,000 V). There are oscillator, filter at oscillator frequency, multiplier of frequency, amplifier with sensibility control and audio system.

Also you can use a xtal oscillator and put the sample in one face (nude xtal). This is similar to technic used in microbalance detector for molecule of explosives and others.

Regards

Just curious; what exactly is going on "In this chamber is a coil (1,000 tuns fine wire) wich "noses" the molecules of bill" ?

I'm not familiar with your term "noses". Could you liken this term to a known physical scientific process, either chemical, mechanical or perhaps electrostatic?

[Fred]

Just curious; what exactly is going on "In this chamber is a coil (1,000 tuns fine wire) wich "noses" the molecules of bill" ?

I'm not familiar with your term "noses". Could you liken this term to a known physical scientific process, either chemical, mechanical or perhaps electrostatic?

"Smells."
Like molecules detectors i suppose.
Fred.

[J_Player]

US currency and Euros have embedded radio frequency ID tags in each note:

http://www.prisonplanet.com/022904rfidtagsexplode.html

http://news.cnet.com/2100-1017_3-1009155.html?tag=fd_top

http://www.scienceprog.com/radio-frequency-identification-rfid/

http://www.pinktentacle.com/2007/02/hitachi-develops-rfid-powder/

But why not build an RFID reader? Could you build a paper money detector using electronics?

http://todbot.com/blog/2007/08/09/adding-a-remote-antenna-to-parallaxs-rfid-reader/

In 2005, an RFID tag was scanned at a distance of 69 feet...

http://blog.makezine.com/archive/2005/07/_defcon_rfid_wo.html

Does this mean that Devcon produced a prototype for a true long range treasure locator?

Best wishes,
J_P

[Dell Winders]

http://www.scienceprog.com/radio-fre...fication-rfid/

Looks like you have exposed the secret of my passive LRL's

Congratulations! Now you can build your own working LRL, and stop inferring that I am a liar. Dell

[J_Player]

Looks like you have exposed the secret of my passive LRL's

Congratulations! Now you can build your own working LRL, and stop inferring that I am a liar. Dell __________________

"WHAT HAS BEEN DONE, CAN BE DONE"

Aww... Now come on Dell...
You know there are no electronics in any of your LRLs capable of detecting paper money or pharmaceuticals, or even elements. You advertise your X-scan which operates at a few kilohertz, but the RFIDs in currency respond only frequencies well over a hundred KHZ.

Now this is not to say the X-scan is useless. When combined with your brazing rod gizmo that has the 2-segment egg crate hanging on it, it should work real good to detect the general direction of gravity as Carl pointed out.

You want me to stop inferring you are a liar?
Nobody in this forum needs to infer you are a liar. You have already established yourself as a liar and a conniving fool who tried to pull the wool over the eyes of a lot of people who read this forum, and who were too smart to fall for your trickery. We know all about your shady dealings in the early days of LRLs, and how you sold thousands of dollars worth of equipment you knew did not work after testing it yourself in front of witnesses. Why must anyone infer you are a liar when you admitted it right in this forum?

I really don't like wasting my time arguing with people who don't have a clue what they are talking about, and can only boast about their years of experience, yet are afraid to demonstrate their products actually working in front of witnesses.

Have a nice day Dell, and look for new ways to spend the money you found with your brazing rods and egg crates.... Oooops.. I mean treasure locators.

"WHAT HAS BEEN DONE, CAN BE DONE... P.T. Barnum did it, and Dell Winders can do it."

[Dell Winders]

What are you talking about? I have no idea where you obtain your information from, but it's certainly contrived with out any respect for truth. You are a bald faced liar. There has not been a single customer complaint presented on any instrument I have built. That is a fact

If you are insistent on making irresponsible libelous allegations, show your proof? Who are these alleged customers I have personally built LRL's for that you claim I lied to.

Don't be so cowardly. Why do you hide behind aliases and make venomous remarks. Present these people, and allow me to face your alleged accusers. If I am as bad as you claim why doesn't someone notify the authorities. What have you got to hide? Get Real. Get the facts. Get the truth.

Everything I do is open to public scrutiny. Always has been. I use my real name, real address, and real telephone number of 22 years. I am reachable. Truthful claims and Information about the products I build are posted on the Internet for all to see and make their own intelligent decision. I have nothing to hide.

How about you folks here with the venomous tongues? Is your life as open to world wide public scrutiny as mine is? Are you as honest and truthful? Why are you the ones hiding behind aliases? Are you ashamed? Dell

[Clondike Clad]

Ok Dell

What are you talking about? I have no idea where you obtain your information from, but it's certainly contrived with out any respect for truth. You are a bald faced liar. There has not been a single customer complaint presented on any instrument I have built. That is a fact

If you are insistent on making irresponsible libelous allegations, show your proof? Who are these alleged customers I have personally built LRL's for that you claim I lied to.

Don't be so cowardly. Why do you hide behind aliases and make venomous remarks. Present these people, and allow me to face your alleged accusers. If I am as bad as you claim why doesn't someone notify the authorities. What have you got to hide? Get Real. Get the facts. Get the truth.

Everything I do is open to public scrutiny. Always has been. I use my real name, real address, and real telephone number of 22 years. I am reachable. Truthful claims and Information about the products I build are posted on the Internet for all to see and make their own intelligent decision. I have nothing to hide.

How about you folks here with the venomous tongues? Is your life as open to world wide public scrutiny as mine is? Are you as honest and truthful? Why are you the ones hiding behind aliases? Are you ashamed? Dell

Let me test one of your LRL unit and post what I find.

ARE YOU WILLING TO PUT UP OR SHUT UP.
I WILL NOT TAKE IT APART BUT I DO HAVE HI END PEOPLE TO TEST IT.
(WHAT I MEAN BY HI END PEOPLE WITH OVER 20 YEARS OF SCHOOL)
YES SOME OF THEM WORK ON STUFF THAT FAR OUT IN SPACE( REAL SPACE)
AS YOU KNOW LIGHT FLYS AT 186,282.42mps amd electrons go bump tode bump and don't move very far right.

[J_Player]

Let me test one of your LRL unit and post what I find.

ARE YOU WILLING TO PUT UP OR SHUT UP.
I WILL NOT TAKE IT APART BUT I DO HAVE HI END PEOPLE TO TEST IT.
(WHAT I MEAN BY HI END PEOPLE WITH OVER 20 YEARS OF SCHOOL)
YES SOME OF THEM WORK ON STUFF THAT FAR OUT IN SPACE( REAL SPACE)
AS YOU KNOW LIGHT FLYS AT 186,282.42mps amd electrons go bump tode bump and don't move very far right.

Hi Clondike Clad,
It's nice of you to offer to make a real test for Dell's LRL. Did you know I also offered to test an LRL that Dell sold more than 2 years ago?

After asking some questions about the origin of a product Dell sold, Dell asked if I ever conducted field tests of this product, claiming that sceintific testing was lacking. He then went on to say "people, stop pretending to be Scientific. Do your field testing, experiments & research before you keep jumping to conclusions..." Of course, I then offered to test his product. http://thunting.com/geotech/forums/s...ad.php?p=56493
Guess what was Dell's response... Nothing. He ignored my offer.

The fact is Dell does not want the products he sells to be tested scientifically. He only wants people to send him money so he can continue peddling his crap. Dell will not demonstrate the X-scan working in front of witnesses, nor will he send an X-scan to you to be tested scientifically. He is only posting in this forum in order to gain publicity for his website and to attempt to sell his products.

Good luck with your search for a paper money detector. You might look into building a long range RFID reader, using methods like Devcon did to locate RFIDs at a record distance.

Best wishes,
J_P

[J_Player]

What are you talking about? I have no idea where you obtain your information from .... show your proof? Who are these alleged customers I have personally built LRL's for that you claim I lied to.

Hi Dell,
You are now accusing me of saying you lied to your customers? I did not say that, and again, you don't have a clue what you are talking about. I said "you have already established yourself as a liar and a conniving fool who tried to pull the wool over the eyes of a lot of people who read this forum, and who were too smart to fall for your trickery".

I already posted: "I really don't like wasting my time arguing with people who don't have a clue what they are talking about..." If you really want to see my proof that what I posted is correct, then restate your complaint in the proper thread "Dells Complaints". I will not waste any more of my time on your attempts to side-track this topic of detecting paper currency.

Best wishes,
J_P

[Theseus]

"Smells."
Like molecules detectors i suppose.
Fred.

Oh, I get it now. Probably the same principle the Sniffex uses to smell or sniff out bombs and explosives.

http://blog.wired.com/defense/2007/02/sniffing_bomb_d.html

That device was also found to be nothing more than a scam dowsing rod. Just like Dell's X-Scan(Scam).