Announcement

Collapse
No announcement yet.

ICONOS Gold Detector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hardi
    replied
    Amazing Detector !!!!?
    Yet, I could not understand how they could cheat people like this? ... LRL manufactures...
    LRL equal =>
    # - 10 years waiting just to see if the stuff realy detects or not?
    ... Who can bury a peace of gold and wait for 10 years or more. It is ossible to say 10 years of being the gold underground is not
    enough for that kind (e.g. Iconos, Minero,. etc..) it is open for this kind of physics... at that time there will be not manafacture to return
    you the money.
    # - LRLs not let you be frustrated...! They beep as you like, in any direction, for any thing located any where !!!! ..... and it is open to
    justify the situation. For example, you can complain in any direction that there must be a peace of gold starting from 1m to 12 Km (as
    Minero stated) Who knows? Who can say not? If say not.....come and dig it ?
    OK . I will dig but just tell me how much..... 1m or 2m or 100s of meters?. Nobody can dig?
    So, LRLs realy works untill otherwise proved? It is open for justification....It works but need special experiences, special training an so
    on and so forth.
    It is exactly like if I say "THE PLACE WHERE PARKED MY BYCYCLE IS THE CENTER OF THE EARTH"
    Can anybody prove that is not? If say not please come and measure it? Who can measure it? may be someone like those who
    convised peaple to buy there stuff? may be. So, it is fact untill otherwise proved !
    # - LRLs costs not too make.....Less than 100 $, So why several thousands for buying... If they sell it for 200$, nobody will buy it!
    Be aware with LRLs ....does not detect......expencive...... not scientfically proved.... may be dowsing in an other way...frau d education
    ... and .... and it also open !!!!

    Leave a comment:


  • Geo
    replied
    Originally posted by Kirk Chi View Post
    Geo,
    Is your ICONOS working?
    I am not having good experience with ICONOS Gold Detector company.
    They sent me a defective unit. Then after returning and sending more money, they sent me a fake courier traking number that does not exist. Now, they do not reply to my call or email.
    Are you having better experience?
    Hello.
    I know other 3 persons that bought the Iconos. My detector is the first model with sensitivity check on the upper side. My Iconos is working OK. As i know one iconos has detected 4 -5 objectives. One other .... nothing and the third iconos working but as the owner said me he need long time to balance and to start to work.
    But remember that Iconos can detect only old burried gold (as iconos says) but not fresh.
    I want to believe that the "Iconos" company will send you a good detector
    Regards

    Leave a comment:


  • Kirk Chi
    replied
    JP,
    Thanks for the info on the Federal Trade Commision.
    I will follow up.

    Leave a comment:


  • Kirk Chi
    replied
    Geo,
    Is your ICONOS working?
    I am not having good experience with ICONOS Gold Detector company.
    They sent me a defective unit. Then after returning and sending more money, they sent me a fake courier traking number that does not exist. Now, they do not reply to my call or email.
    Are you having better experience?

    Leave a comment:


  • Clondike Clad
    replied
    Only Dell

    Originally posted by Dell Winders View Post
    That's true. I have never sold any Rods intended for use for Mental Meta-physical Dowsing.

    Since Dowsing Rods are usually held parallel with the ground, and the Rods I am using in the photo are angled towared the ground, it is obvious I am not Dowsing with the Rods in the photo. The dual Antenna rods I sell are intended to be used with LRL products. If you wish to use them for mental Dowsing, that is your perrogative, but not reccommended by me.



    That's his twisted accusation. It's not my work. I didn't build it. Dell
    Dell if I am twisted is that better than a scammer?
    As you know and I repeat AS YOU KNOW your LRL works just like the others.
    MONEY FOR THE SELLER only.
    Why don't you take Carl's 25,000 and show us your stuff works.
    Oh who is that man is not you??????
    Why are you using him as you?
    NOW DON'T LIE

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by Dell Winders View Post
    Max, as I said,"

    "THE DOOR TO KNOWLEDGE & UNDERSTANDING IS NEVER OPEN TO A CLOSED, OR PREJUDICED MIND."

    Your ignorance and dis-honest claims are showing.

    I don't use hot glue in the products I build. Never have. Where do you see any? I don't even own a glue gun.

    The shame is on you for not being truthful. Get real! Dell
    In the LRLs > Reports section of this website, there is a report on the DELL VR-800, and it states "The VR-800 is a so-called long-range locator (LRL) made by Dell Systems of Haines City, FL."

    I don't know about you, but I can see a lot of hot glue inside this device.

    Now ... maybe you actually didn't construct this thing with your own fair hands, and you paid someone else to do the building ... but you did sell this device. In which case, you're just being pedantic.

    Leave a comment:


  • Dell Winders
    replied
    So it's just like when you wrote you don't sell dowsing rods...
    That's true. I have never sold any Rods intended for use for Mental Meta-physical Dowsing.

    Since Dowsing Rods are usually held parallel with the ground, and the Rods I am using in the photo are angled towared the ground, it is obvious I am not Dowsing with the Rods in the photo. The dual Antenna rods I sell are intended to be used with LRL products. If you wish to use them for mental Dowsing, that is your perrogative, but not reccommended by me.

    Really I don't know why Clondyke Clad posted that stuff with hot melt glue around... must ask him!

    Kind regards,
    Max
    That's his twisted accusation. It's not my work. I didn't build it. Dell

    Leave a comment:


  • Clondike Clad
    replied
    Dell do you,Now DELL DO YOU KNOW

    Originally posted by Max View Post
    but the question is... if not you... WHO THE HELL MADE THIS ?

    Sorry I forgot you don't know... and also if know that... you probably forget that now... cause you need the chemical stuff in the pap!

    Really I don't know why Clondyke Clad posted that stuff with hot melt glue around... must ask him!
    Just lookie at this

    Kind regards,
    Now Dell you tell me you don't own a glue gun?
    I have glue guns and most electronic's people have glue guns
    Now you tell me ,you YES YOU don't have a glue gun.
    DELL STOP THE LIE.
    Max
    NOW please stop the lie.

    Leave a comment:


  • Geo
    replied
    Originally posted by putrechigi View Post
    Andreas where you are, you some advice from friend unfortunate given that the icons you've worked ..................

    and geo? you have the iconos
    I have the iconos.
    Where is your problem????
    I am here!!!!!!!!!

    Leave a comment:


  • Max
    replied
    but the question is... if not you... WHO THE HELL MADE THIS ?

    Sorry I forgot you don't know... and also if know that... you probably forget that now... cause you need the chemical stuff in the pap!

    Really I don't know why Clondyke Clad posted that stuff with hot melt glue around... must ask him!

    Kind regards,
    Max
    Attached Files

    Leave a comment:


  • Max
    replied
    Originally posted by Dell Winders View Post
    Max, as I said,"

    "THE DOOR TO KNOWLEDGE & UNDERSTANDING IS NEVER OPEN TO A CLOSED, OR PREJUDICED MIND."

    Your ignorance and dis-honest claims are showing.

    I don't use hot glue in the products I build. Never have. Where do you see any? I don't even own a glue gun.

    The shame is on you for not being truthful. Get real! Dell
    maybe is the age...

    So it's just like when you wrote you don't sell dowsing rods...

    I think you need some phospor more in the pap, Dell!

    Maybe you forget stuff... I see... I understand...

    Kind regards,
    Max
    Attached Files

    Leave a comment:


  • Dell Winders
    replied
    Max, as I said,"

    "THE DOOR TO KNOWLEDGE & UNDERSTANDING IS NEVER OPEN TO A CLOSED, OR PREJUDICED MIND."

    Your ignorance and dis-honest claims are showing.

    I don't use hot glue in the products I build. Never have. Where do you see any? I don't even own a glue gun.

    The shame is on you for not being truthful. Get real! Dell

    Leave a comment:


  • Max
    replied
    Originally posted by Dell Winders View Post
    I posted a photo of the LRL circuit I use, as you requested on another thread. You are welcome to build your own. Anyone can. I did!

    But since you have already pre-determined it is crap, why don't you build a better LRL and let us learn from your field experience use?

    Ranting about what others do, or don't do to suit you, doesn't resolve anything. It only demonstrates your own inability to comprehend. Show us how you would build a better LRL? I look forward to hearing of your own discoveries with LRL.

    " THE DOOR TO KNOWLEDGE & UNDERSTANDING IS NEVER OPEN TO A CLOSED, OR PREJUDICED MIND." dELL


    Be real and got some shame... you're not playing the guitar on the MTV... but probably melt some glue just right now...

    This is the general equation for getting richer:

    LRL = money for nothing

    But seems that people wanna make you all, "LRL manifacturers", richer anyway...

    Kind regards,
    Max
    Attached Files

    Leave a comment:


  • Dell Winders
    replied
    inside of what dell
    Anyone can show crap( show me the circuit so i can build it.
    This is a warp drive engine.(Show me the circuit and no scam please.)
    I posted a photo of the LRL circuit I use, as you requested on another thread. You are welcome to build your own. Anyone can. I did!

    But since you have already pre-determined it is crap, why don't you build a better LRL and let us learn from your field experience use?

    Ranting about what others do, or don't do to suit you, doesn't resolve anything. It only demonstrates your own inability to comprehend. Show us how you would build a better LRL? I look forward to hearing of your own discoveries with LRL.

    " THE DOOR TO KNOWLEDGE & UNDERSTANDING IS NEVER OPEN TO A CLOSED, OR PREJUDICED MIND." dELL

    Leave a comment:


  • putrechigi
    replied
    hi

    Andreas where you are, you some advice from friend unfortunate given that the icons you've worked ..................

    and geo? you have the iconos

    Leave a comment:

Working...
X