LRL Ionic/Electrostatic energy field locator

[Fred]

Thanks Geo for your results, you are one of the very few reporting objective observations.
Keep posting the truth, wish you success.
Regards,
Fred.

[Qiaozhi]

Finally i went to the house from a friend and made another test. He has 2 silver coins in the ground at 30...40 cm, 18 years ago. With pcb5 and ferrite i did not took any signal. With round coil (this time with 11cm coil) i took signal but random. When i was 1... 2m near the coins i had some random beeps so it was impossible to pinpoint them. I don't know what happening other day and time, but these time my detector was not useful because with a metal detector i should made the same and better work.

But exists the phenomenon. Who phenomenon......
I don't know
Regards

Thanks Geo for your results, you are one of the very few reporting objective observations.
Keep posting the truth, wish you success.
Regards,
Fred.

Exactly!

If you think the PHENOMENON is real, then try to quantify it. Subjective measurement and wild theories are of no interest. If the readings appear random, then they probably are.

Keep up the good work Geo.

[Esteban]

Thanks Geo for your results, you are one of the very few reporting objective observations.
Keep posting the truth, wish you success.
Regards,
Fred.

Geo, I agree, keep the truth!

[epitopios]

LRL Ionic/Electrostatic energy field locator

to Morgan
about this:

is there any shematic diagram ?
and also, about TRANSISTOR SC109 is there any other corresponding (proposed) transistor ?
friendly epitopios

[Max]

to Morgan
about this:

is there any shematic diagram ?
and also, about TRANSISTOR SC109 is there any other corresponding (proposed) transistor ?
friendly epitopios

?

Another LRL fanatic ?

You have pcb... reverse schematic!

And transistor SC109 is maybe BC109 ... old thing... can use anything instead of it... like BC239.

And then ?

Does it let you find a coin at 10meters ? You're optimist.

Kind regards,
Max

[Geo]

If i remember OK, the reversed schematic has wrongs at the first oscillator. It takes the out from base, not from colector
I think that Fred reversed the PCB.
To Epitopios...Πανο εαν δεν το βρεις θυμησε μου να στο στειλω, αν και εχει λαθη... διορθωνονται ευκολα

Regards

[epitopios]

LRL Ionic/Electrostatic energy field locator

?

Another LRL fanatic ?

You have pcb... reverse schematic!

And transistor SC109 is maybe BC109 ... old thing... can use anything instead of it... like BC239.

And then ?

Does it let you find a coin at 10meters ? You're optimist.

Kind regards,
Max

dear Max , let me find something in 10 meters and then i will put another zero , ha ha
always must optimist and dreamer in our lifes , thats why we live in the earth !!!
friendly epitopios

[epitopios]

a PLL transmitter

If i remember OK, the reversed schematic has wrongs at the first oscillator. It takes the out from base, not from colector
I think that Fred reversed the PCB.
To Epitopios...Πανο εαν δεν το βρεις θυμησε μου να στο στειλω, αν και εχει λαθη... διορθωνονται ευκολα

Regards

Geo , if we have a PLL Transmitter (10hz - 3Mhz) i think its a better solution and of course more stable !!!!!
I need opinions ........




friendly epitopios

[WM6]

Geo , if we have a PLL Transmitter (10hz - 3Mhz) i think its a better solution and of course more stable !!!!!
I need opinions ........

Something that can suit your needs:

http://www.analog.com/static/imported-files/data_sheets/AD5930.pdf

Or even NE566

Amazingly, the NE566 can be made to sweep a continuous 1000:1 frequency span with just one fixed timing capacitor. Imagine, continuous linear tuning 20 Hz - 20 KHz or 1 KHz - 1 MHz without switching. A simple op-amp circuit provides the precise voltage control necessary. You set the range with the selection of the timing capacitor.

[simonbaker]

Something that can suit your needs:

http://www.analog.com/static/imported-files/data_sheets/AD5930.pdf

Or even NE566

Amazingly, the NE566 can be made to sweep a continuous 1000:1 frequency span with just one fixed timing capacitor. Imagine, continuous linear tuning 20 Hz - 20 KHz or 1 KHz - 1 MHz without switching. A simple op-amp circuit provides the precise voltage control necessary. You set the range with the selection of the timing capacitor.

What circuit allows 1000:1 sweep without changing components?

-SB

[ivconic]

AD9850, AD9851.......

[ivconic]

https://www.arrl.org/qex/2008/11/Green.pdf

[epitopios]

LRL Ionic/Electrostatic energy field locator

www.arrl.org/qex/2008/11/Green.pdf

very good - веома добар
friendly eiptopios

[WM6]

What circuit allows 1000:1 sweep without changing components?

-SB

Some circuit with NE566, like this:

[ivconic]

Real cooky!