LRL Ionic/Electrostatic energy field locator

[Morgan]

LRL

Hi Morgan,
Did your LRL device can detect long time buried treasure ???!!!

I advance too much if i say direct yes,this is experimental
Yes,according size,but only BIG objects who produce uderground electromagnetic fields,these can be locateted with any electromagnetic field locator with correct frequency and antenna.
When i use my prototype with BFO,i found some large objects (copper) buried long time ago and a few meters distance,they was not deep.
But when have time i will make better antennas to avoid radio station signal(sometimes it catch radio) and concentrate for the small objects.

[Morgan]

LRL

I advance too much if i say direct yes,this is experimental
Yes,according size,but only BIG objects who produce uderground electromagnetic fields,these can be locateted with any electromagnetic field locator with correct frequency and antenna.
When i use my prototype with BFO,i found some large objects (copper) buried long time ago and a few meters distance,they was not deep.
But when have time i will make better antennas to avoid radio station signal(sometimes it catch radio) and concentrate for the small objects.

Here is some improvments for simplificate the project.
This was made by forum member Funfinder.
He get the way to detect silver ring direct from the electrostatic circuit,he use special directional antenna.

[Morgan]

LRL

Hi Morgan,
Did your LRL device can detect long time buried treasure ???!!!

Have a look on thread ICONOS MD 807,and see the videos .

[Funfinder]

@ GOLDENSKULL
Here you will find the actual newest schematics:

http://www.geotech1.com/forums/showpost.php?p=112152&postcount=9

and as directional antenna you can try out some flat metal object or a coil - perhaps also a telescop-antenna. I haven't had time yet for finding out the best directional antenna solution - perhaps also some AM radio ferrite coils would work good.
Not forget about some grounded shielding around the antenna.

[Morgan]

IONIC BFO

@ GOLDENSKULL
Here you will find the actual newest schematics:

http://www.geotech1.com/forums/showpost.php?p=112152&postcount=9

and as directional antenna you can try out some flat metal object or a coil - perhaps also a telescop-antenna. I haven't had time yet for finding out the best directional antenna solution - perhaps also some AM radio ferrite coils would work good.
Not forget about some grounded shielding around the antenna.

Hello

The combination of both circuits BFO+IONIC,is not so bad,just need better directional antenna . I will try to improve this project and give results here.
As i remember it was forum members Humhum and Detectoman said it works great.Of course,its not good as the Pistoldetektor,but as i told found big copper objects some meters distance,and remember one old zinc plate give also signals.This is more experimental,and it will be great if we can make it work more simple without BFO...

Regards

[WM6]

@ GOLDENSKULL
Here you will find the actual newest schematics:

http://www.geotech1.com/forums/showpost.php?p=112152&postcount=9

and as directional antenna you can try out some flat metal object or a coil - perhaps also a telescop-antenna. I haven't had time yet for finding out the best directional antenna solution - perhaps also some AM radio ferrite coils would work good.
Not forget about some grounded shielding around the antenna.

Those are is decade old schematics and well known.

Here you are really actual and newest schematic of PD pistol by Funfinder:

[nelson]

Hi Morgan.
Can you give me the working frequency of the detector?
Has a hamradio entusiast, I have some antenna modeling expirence and may be i can help on, developing a suitable antenna for this divice.

Regards

Nelson

Hello

The combination of both circuits BFO+IONIC,is not so bad,just need better directional antenna . I will try to improve this project and give results here.
As i remember it was forum members Humhum and Detectoman said it works great.Of course,its not good as the Pistoldetektor,but as i told found big copper objects some meters distance,and remember one old zinc plate give also signals.This is more experimental,and it will be great if we can make it work more simple without BFO...

Regards

[humhum]

Swivel Antenna

Hi to All , this modifcation version is more good for Electrostatic Swivel Antenna .

http://www.teknolojiekibi.com/yeni/index.php?topic=1809.0

[Morgan]

LRL

Hi Morgan.
Can you give me the working frequency of the detector?
Has a hamradio entusiast, I have some antenna modeling expirence and may be i can help on, developing a suitable antenna for this divice.

Regards

Nelson

Hi Nelson

I would like to help you but not have any osciloscope...

Regards

[WM6]

Hi Nelson

I would like to help you but not have any osciloscope...

Regards

Hi Morgan,

here you are to download PC scope (and much more) for free:

http://www.sillanumsoft.org/prod01.htm

different solution of test probe to DIY:

[nelson]

Ok Morgan, so i will try to get componets to build the FET version and then i will try to measure the frequency.
Regards
Nelson

Hi Nelson

I would like to help you but not have any osciloscope...

Regards

[Funfinder]

@ GOLDENSKULL @ nelson

Here are my final schematics:

http://www.geotech1.com/forums/showpost.php?p=112525&postcount=59

[mehdi]

@ GOLDENSKULL @ nelson

Here are my final schematics:

http://www.geotech1.com/forums/showp...5&postcount=59

hi funfinder
i built your fet version but the led light every time and no sound in headphone!!!
i use 2n3819 and bc547
please help me
mehdi

[student]

hai morgan,

The circuit will detect static energy material in underground, for how long it will detect?. Is it possible to make permanent static energy?. Shall you make lrl static energy detector i will pay fee for it,

I will ask the person who was mixing the two circuits. But i think its not only to pinpoint the objects located by the ionic. In my experiments,they react together to targets.

[roccocoin]

no martini........no party tanks da italy

Esteban,
What is the problem of people knowing how to build it ? they are not going to search for YOUR treasures, so why don´t you want to give all the details?
And even if Chineses company are making it, you will be the one that invented it.
Like Da Vinci and the helicopter
Regards,
Fred.

hello fred, and I know these real jealous of their proposed projects and not make public a full and fair single project without errors, I follow this forum I built a 2 pdk TOTEM and another type but do not work either, and then they fooled uinutile if you do not want to post and been shut up so I'd better not take away from italy your treasure ....... ok?







Annulla modifiche












Il tuo contributo sarà utilizzato per migliorare la qualità della traduzione e può essere mostrato agli utenti in modo anonimo

Contribuisci
Chiudi


Grazie per l'invio.



























Please help Google Translate improve quality for your language here.
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export


Trascina e rilascia il file o il link qui per tradurre il documento o la pagina web.
Trascina e rilascia il link qui per tradurre la pagina web.
Il tipo di file che rilasci non è supportato. Prova altri tipi di file.
Il tipo di link che rilasci non è supportato. Prova altri tipi di link.