Announcement

Collapse
No announcement yet.

Strong signal from Ferrite

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31

    Hi Morgan. I cant see any Buzer for "It beeps when find target".
    It seem to me for a Estebans schematic, but the coil at the rotor is not good
    Regards
    Geo

    Comment


    • #32
      ...

      Originally posted by Geo View Post

      Hi Morgan. I cant see any Buzer for "It beeps when find target".
      It seem to me for a Estebans schematic, but the coil at the rotor is not good
      Regards
      It as a small buzzer inside,like some toys...
      Yes,it beeps when find the target,and its not Esteban project.

      Comment


      • #33
        Hi Geo

        Thanks for pictures , did you built the carl MFD and test it on a long range target?

        about the distance i must say that i'm not the skeptic man that always say "it's impossible" , but in a very long range (over 500 m) there are many disturbance in environment , soil , other metals and some substants with similar manner as target ,so the device that work based on gravity system and resonanse between the anttena and the target in a speciall frequency hardly can detect the target and confiused . but nothing is imposible


        Hi Aft.
        I don't use the coils. I connect the signal and the gnd to the earth via 2 crocodile
        Regards
        is the signals that emitted by the target or from your signal generator or another enviromental noise ?


        Nice work Morgan
        but now you built the PD , and your PD become a big mystery to me , which device is better , PD or your Lrod ?

        Morgan , if you help and i built a PD someday i promise you that i don't steal your country treasures

        Comment


        • #34
          MFD

          Originally posted by Great_Alex View Post
          Hi Geo

          Thanks for pictures , did you built the carl MFD and test it on a long range target?

          about the distance i must say that i'm not the skeptic man that always say "it's impossible" , but in a very long range (over 500 m) there are many disturbance in environment , soil , other metals and some substants with similar manner as target ,so the device that work based on gravity system and resonanse between the anttena and the target in a speciall frequency hardly can detect the target and confiused . but nothing is imposible

          Hi

          Of course the PD is more serious LRL device than the MFD,anyway i found a lot of objects with the Carl´s power generator dowsing system,but some junk also. I can say its possible to find treasure with this,but in the range of 50 to 100 meters,not more.The single Rod Antenna produce bether results than the two rod´s like Geo is using...

          Regards


          is the signals that emitted by the target or from your signal generator or another enviromental noise ?


          Nice work Morgan
          but now you built the PD , and your PD become a big mystery to me , which device is better , PD or your Lrod ?

          Morgan , if you help and i built a PD someday i promise you that i don't steal your country treasures

          Yes the oncle Carl´s MFD works,hope not registrated patent

          Comment


          • #35
            Originally posted by Geo View Post
            Hi Alex. The frequency 13.92 Khz is frequency for copper. Also copper is detective with 11.7 Khz but L rods open....
            I attach you some pictures of the generatoe, and the amplifier with the inverter 12 to 225.5 V
            Regards
            Hmmm ...

            We've just seen a different list of frequencies on another thread, which states Copper has a "special" frequency of 58.6kHz. Now you're saying it's 13.92kHz.
            You cannot both be correct ..... but you could both be wrong!

            Comment


            • #36
              Originally posted by Great_Alex View Post
              Hi Geo

              Thanks for pictures , did you built the carl MFD and test it on a long range target?

              about the distance i must say that i'm not the skeptic man that always say "it's impossible" , but in a very long range (over 500 m) there are many disturbance in environment , soil , other metals and some substants with similar manner as target ,so the device that work based on gravity system and resonanse between the anttena and the target in a speciall frequency hardly can detect the target and confiused . but nothing is imposible

              is the signals that emitted by the target or from your signal generator or another enviromental noise ?


              Nice work Morgan
              but now you built the PD , and your PD become a big mystery to me , which device is better , PD or your Lrod ?

              Morgan , if you help and i built a PD someday i promise you that i don't steal your country treasures
              Hi Alex.
              No, i never tried the Carl MFD. Now about the distance, maybe i have right, maybe you are right. We receive signals from distance longer than 500m, but some times we have false signals. So yes is more hardly to detect right a target from large distance, But it is Possible.

              I speak for generator signal.......

              Regards
              Geo

              Comment


              • #37
                Originally posted by Qiaozhi View Post
                Hmmm ...

                We've just seen a different list of frequencies on another thread, which states Copper has a "special" frequency of 58.6kHz. Now you're saying it's 13.92kHz.
                You cannot both be correct ..... but you could both be wrong!
                I think that the other frequencies are transmit frequencies. Here are ..... (i dont know ), but really work. Believe me, here at Greece a lot of people work with generator and rods with good results especially at coper, bronze and silver.At big quantities of gold there is a problem, we take the signal but we cant locate the center. Always the center is south of the point that the rods see.

                Regards
                Geo

                Comment


                • #38
                  One edit.....
                  At my reply with photos i wrote inverter from 12V to 225.5v, it is wrong.
                  Right is 12V to 25.5 V.
                  Geo

                  Comment


                  • #39
                    ...

                    Originally posted by Geo View Post

                    Hi Morgan. I cant see any Buzer for "It beeps when find target".
                    It seem to me for a Estebans schematic, but the coil at the rotor is not good
                    Regards
                    Coil around Magneto,in Rotor,it works,also some people use little rotor from broken speed car toy.

                    Comment


                    • #40
                      The Buzzer

                      Originally posted by Morgan View Post
                      Coil around Magneto,in Rotor,it works,also some people use little rotor from broken speed car toy.
                      Here is the complete Electronic RodClick image for larger version

Name:	Electronic Rod.JPG
Views:	2
Size:	54.7 KB
ID:	85560

                      Comment


                      • #41
                        Originally posted by Morgan View Post
                        Here is the complete Electronic Rod[ATTACH]7226[/ATTACH]
                        I presume that the rod on top is able to swing from side-to-side, and the coil inside the box detects the movement of the rod. Correct?

                        Comment


                        • #42
                          Originally posted by Qiaozhi View Post
                          I presume that the rod on top is able to swing from side-to-side, and the coil inside the box detects the movement of the rod. Correct?
                          Before some years i had a schematic with a 555 to drive a coil at VLF.The coil was externally of the axis of the rod. It seems about the same with Morgan's LRL rod. If i will find, i"ll attach it
                          Regards
                          Geo

                          Comment


                          • #43
                            Rod

                            Originally posted by Qiaozhi View Post
                            I presume that the rod on top is able to swing from side-to-side, and the coil inside the box detects the movement of the rod. Correct?
                            Yes,it swing,and the antenna is able to detect the signals reflected in buried objects, signal wave sent to ground by oncle Carl´s MFD frequence generator.
                            It works fine,but not so far from the MFD...

                            Comment


                            • #44
                              Originally posted by Geo View Post
                              Before some years i had a schematic with a 555 to drive a coil at VLF.The coil was externally of the axis of the rod. It seems about the same with Morgan's LRL rod. If i will find, i"ll attach it
                              Regards

                              Geo στειλτω και σε μενα.....

                              Comment


                              • #45
                                Originally posted by Morgan View Post
                                Yes,it swing,and the antenna is able to detect the signals reflected in buried objects, signal wave sent to ground by oncle Carl´s MFD frequence generator.
                                It works fine,but not so far from the MFD...
                                So it's really a dowsing rod in disguise.

                                Comment

                                Working...
                                X