Making a test area for pistol

[Esteban]

You can create a test area for pistols (or other LRL instrument), for example, in this way:

1. Achieve 150-200 coins (cheaps) bronze and copper. Also can be some nickels.

2. Put in a plastic recipient with few quantity of the liquid (mixed with water) you use for to corrode copper PCB (we use here percloric salt of iron). Not acid. Instead it you can use common vinegar.

3. Move it with the coins and leave for 2 days in open space. Coins must be wet with the liquid. Take care with your clothes!

4. Quit all the liquid but no dry totally. Leave in air and Sun for 1 week or more at dry totally. Now you have green coins corroded artificially.

5. Put all it in a hole at 50 cm depth mixed with vegetable charcoal and common salt in big grains. Charcoal is for to absorb excess of humidity and salt is for to mantain humidity in dry epochs. Make this area far of iron objects. First, check this area and clean of big iron materials.

6. Put over it small quantity of water. Close the hole very well and mark the site properly for to remember where are buried the targets. You can use half brick over targets for to mark it.

7. Don't use common metal detector for to test this area, because the energy of oscillator consumes the "field". Rays of storm in the nearby also consume it. But always the energy is recovered through the time.

Don't know in wich time appears the phenomenon, maybe one year or more, but this is a good way.

Regards

Esteban

[detectoman]

thanks esteban i have one big tape of gold of whatchman of train, of coper only chapead of gold and in other near field, one little jar of ceramic whit only 30 coins of coper, of years 50's, since one mes same two, whit add of direct salt of kitchen and water, what you think what time await i need for i can try?

[sweatofglory]

You can create a test area for pistols (or other LRL instrument), for example, in this way:

1. Achieve 150-200 coins (cheaps) bronze and copper. Also can be some nickels.

2. Put in a plastic recipient with few quantity of the liquid (mixed with water) you use for to corrode copper PCB (we use here percloric salt of iron). Not acid. Instead it you can use common vinegar.

3. Move it with the coins and leave for 2 days in open space. Coins must be wet with the liquid. Take care with your clothes!

4. Quit all the liquid but no dry totally. Leave in air and Sun for 1 week or more at dry totally. Now you have green coins corroded artificially.

5. Put all it in a hole at 50 cm depth mixed with vegetable charcoal and common salt in big grains. Charcoal is for to absorb excess of humidity and salt is for to mantain humidity in dry epochs. Make this area far of iron objects. First, check this area and clean of big iron materials.

6. Put over it small quantity of water. Close the hole very well and mark the site properly for to remember where are buried the targets. You can use half brick over targets for to mark it.

7. Don't use common metal detector for to test this area, because the energy of oscillator consumes the "field". Rays of storm in the nearby also consume it. But always the energy is recovered through the time.

Don't know in wich time appears the phenomenon, maybe one year or more, but this is a good way.

Regards

Esteban

Thank you so much my friend

[Morgan]

Test for LRL

You can create a test area for pistols (or other LRL instrument), for example, in this way:

1. Achieve 150-200 coins (cheaps) bronze and copper. Also can be some nickels.

2. Put in a plastic recipient with few quantity of the liquid (mixed with water) you use for to corrode copper PCB (we use here percloric salt of iron). Not acid. Instead it you can use common vinegar.

3. Move it with the coins and leave for 2 days in open space. Coins must be wet with the liquid. Take care with your clothes!

4. Quit all the liquid but no dry totally. Leave in air and Sun for 1 week or more at dry totally. Now you have green coins corroded artificially.

5. Put all it in a hole at 50 cm depth mixed with vegetable charcoal and common salt in big grains. Charcoal is for to absorb excess of humidity and salt is for to mantain humidity in dry epochs. Make this area far of iron objects. First, check this area and clean of big iron materials.

6. Put over it small quantity of water. Close the hole very well and mark the site properly for to remember where are buried the targets. You can use half brick over targets for to mark it.

7. Don't use common metal detector for to test this area, because the energy of oscillator consumes the "field". Rays of storm in the nearby also consume it. But always the energy is recovered through the time.

Don't know in wich time appears the phenomenon, maybe one year or more, but this is a good way.

Regards

Esteban

Thanks Esteban


Other good test for LRL is to buy 50cm of silver(used for soldering) make a full contact loop(use your soldering iron). Buried the silver loop at 40 cm,or more ,but maybe near the surface create more fast the phenomenon.Humidity in the ground acelerate the phenomenon.
I have done this 3 years ago to try Mineoro. Until now only the model DC2008 detect the loop 50 cm distance,and my PD detect 3 m distance.


Abrazos

[Esteban]

thanks esteban i have one big tape of gold of whatchman of train, of coper only chapead of gold and in other near field, one little jar of ceramic whit only 30 coins of coper, of years 50's, since one mes same two, whit add of direct salt of kitchen and water, what you think what time await i need for i can try?

Hola Detectoman

Como le digo, primero debe mojar las monedas con vinagre y remover bien, dejarlo por 2 días. Luego, sacar el vinagre y ponerlo todo expuesto al sol por una semana o más hasta que todo se seque. Después haga un hoyo de 50 cm y ponga las monedas adentro con carbón vegetal y sal gruesa de cocina. Luego remoja todo con agua y lo entierra todo bien y marca el sitio con medio ladrillo. Es mejor que sean muchas monedas, como 150 a 200, solo de cobre y bronce, puede ser un poco de níquel. No debe haber hierro grande en la cercanía.

Creo que en 1 año o más ya puede haber "fenómeno".

Saludos

Esteban

[Esteban]

Thanks Esteban


Other good test for LRL is to buy 50cm of silver(used for soldering) make a full contact loop(use your soldering iron). Buried the silver loop at 40 cm,or more ,but maybe near the surface create more fast the phenomenon.Humidity in the ground acelerate the phenomenon.
I have done this 3 years ago to try Mineoro. Until now only the model DC2008 detect the loop 50 cm distance,and my PD detect 3 m distance.


Abrazos

Morgan

Interesting method!

Regards

Esteban

[Morgan]

The LOOP

Morgan

Interesting method!

Regards

Esteban

The loop method its very good and cheap,and the ring shape emits strong radiation signal,NO NEED TO BURIED 1 KG OF SILVER COINS

[Esteban]

The loop method its very good and cheap,and the ring shape emits strong radiation signal,NO NEED TO BURIED 1 KG OF SILVER COINS

OK, but I want a test field of coins, because loop is "very strong". Also is useful "weak" fields.

Regards

Esteban

[detectoman]

very thanks to yours esteban and morgan for your interst tips, i go to make other samples how, say
in other thing i think one lrl hibrid whit two detectores in one is most dificultous for put in equal function, in pd i see two tx, one in omega and other in coil 176 and too two rx one in coil little of omega and other in little coil of ferrite
i see in the project modified of esteban zahory one sistem most simple, not critic, have lateral antens how polar directional guide, cental antena, lrl pdk is very critic, not simple are here 18 power transistors and lot of components all in critic point of adjust, four circuits whit elements for put in equal one stabilization
we need lrls whit very simple steps and not critic, my pdk have sensible function, is in equilibre in house but is whit heater hot critic, may be should need change the box, because is in black plastic, in wood is my proxime experiment i put refrigeration
good whises dman.

[sweatofglory]

The loop method its very good and cheap,and the ring shape emits strong radiation signal,NO NEED TO BURIED 1 KG OF SILVER COINS

Thank you guys for the tips..........

[sweatofglory]

You can also try this method on how to test your MFD:

1. Get three empty cough syrup bottles
2. Put silver and copper inside each bottle
3. Add water and close the cap tightly
4. Dig three holes in a triangle formation, 1 foot apart
5. Set silver or Copper frequency

[Esteban]

You can also try this method on how to test your MFD:

1. Get three empty cough syrup bottles
2. Put silver and copper inside each bottle
3. Add water and close the cap tightly
4. Dig three holes in a triangle formation, 1 foot apart
5. Set silver or Copper frequency

Thanks a lot!

[Morgan]

MFD vs PD

You can also try this method on how to test your MFD:

1. Get three empty cough syrup bottles
2. Put silver and copper inside each bottle
3. Add water and close the cap tightly
4. Dig three holes in a triangle formation, 1 foot apart
5. Set silver or Copper frequency

MFD´s are also interesting LRL but the Pistoldetektor shot more direct to the target.

[sweatofglory]

MFD´s are also interesting LRL but the Pistoldetektor shot more direct to the target.

it depends.......

[aft_72005]

You can create a test area for pistols (or other LRL instrument), for example, in this way:

1. Achieve 150-200 coins (cheaps) bronze and copper. Also can be some nickels.

2. Put in a plastic recipient with few quantity of the liquid (mixed with water) you use for to corrode copper PCB (we use here percloric salt of iron). Not acid. Instead it you can use common vinegar.

3. Move it with the coins and leave for 2 days in open space. Coins must be wet with the liquid. Take care with your clothes!

4. Quit all the liquid but no dry totally. Leave in air and Sun for 1 week or more at dry totally. Now you have green coins corroded artificially.

5. Put all it in a hole at 50 cm depth mixed with vegetable charcoal and common salt in big grains. Charcoal is for to absorb excess of humidity and salt is for to mantain humidity in dry epochs. Make this area far of iron objects. First, check this area and clean of big iron materials.

6. Put over it small quantity of water. Close the hole very well and mark the site properly for to remember where are buried the targets. You can use half brick over targets for to mark it.

7. Don't use common metal detector for to test this area, because the energy of oscillator consumes the "field". Rays of storm in the nearby also consume it. But always the energy is recovered through the time.

Don't know in wich time appears the phenomenon, maybe one year or more, but this is a good way.

Regards

Esteban

Thank you Esteban .
Best regards.