Electrotactile seeing

[J_Player]

Electrotactile sensor rods

An approximative device for dowsing rods but electronic involved can be like this. Don't check very well for errors.

Thank you, Esteban.

Now that we have an electromechanical device that can sense the "dowsing signal". I can see an immediate dowsing use for the BrainPort. Let's suppose a person built Esteban's circuit, and discovered they cannot detect the dowsing signal via beeping. This is a clear indication of nerve malfunction in the inner ear or other sensory deficiency -- exactly what the BrainPort is designed for. We can simply connect the output of Esteban's circuit to the BrainPort, and then "taste" the dowsing signal.
See below:

[Esteban]

Thank you, Esteban.

Now that we have an electromechanical device that can sense the "dowsing signal". I can see an immediate dowsing use for the BrainPort. Let's suppose a person built Esteban's circuit, and discovered they cannot detect the dowsing signal via beeping. This is a clear indication of nerve malfunction in the inner ear or other sensory deficiency -- exactly what the BrainPort is designed for. We can simply connect the output of Esteban's circuit to the BrainPort, and then "taste" the dowsing signal.
See below:

Hi J_P

No tested yet, maybe need some adjustment, always exists several changes... but this is the base. Other IC can be TL074 or special chip designed for electronic instrumental used in medicine.

Transpiration made more conductive the skin causes also by the salt. One factor here is that each person has different resistence in the skin and also special powder is necessary in hands for to neutralize effects of transpiration. Maybe other factor is to use rubber shoes for not to disperse the "signal", also for no to be much influenciated by other type of currents of the soil.

Regards

Esteban

[Esteban]

Forgott this connection!

[Esteban]

Just curious; why one handle out of copper and the other steel?

Metal as steel - copper form a pair, steel for negative and copper for positive. You can check introducing in soil 2 rods: copper for positive and steel for negative. Also you can experiment this: put a copper plate at light of Sun. Over this copper plate a mesh of zinc or steel in contact. Let to warm and you'll obtain some small electricity: copper plate is positive and the "fabric" of zinc or steel become negative, exactly has acid - copper - zinc battery. Four "legs" of the zn "fabric" touch the copper plate. The "fabric" of zn is only ilustrative, not need to be very "intricate" (dense).

[Esteban]

Galvano - teluric radio managed by copper - steel: is obtained 0.75 V, 0.9 mA.

[Theseus]

Galvano - teluric radio managed by copper - steel: is obtained 0.75 V, 0.9 mA.

Yes, I can understand the soil is the electrolyte while the two dissimilar metals in combination with the damp soil "may" produce a few microvolts of potential difference.

Are you assuming the same type of action will occur when an operator takes hold of the handles? And, for what purpose? If there is a potential difference, is it going to change based on the familiar ideomotor response, or perhaps some other as yet unidentified external influence (perhaps from a buried treasure)?

[Clondike Clad]

circuit and thanks

Forgott this connection!

OK looking at the input of this circuit what isthe perset adjustment.
What samples can i use and what adjustment do I make on the coil at the input.What would I use for Calibration of this circuit.
I would need this information so I can build and test this.
What I really need is the input signals

[Max]

Thank you, Esteban.

Now that we have an electromechanical device that can sense the "dowsing signal". I can see an immediate dowsing use for the BrainPort. Let's suppose a person built Esteban's circuit, and discovered they cannot detect the dowsing signal via beeping. This is a clear indication of nerve malfunction in the inner ear or other sensory deficiency -- exactly what the BrainPort is designed for. We can simply connect the output of Esteban's circuit to the BrainPort, and then "taste" the dowsing signal.
See below:

Hi,


He can also put the output pair in another place... that I don't say, cause I wanna be polite...

But maybe works better... who knows...

Only way to know... as already described is that they pass a ground loop around jewels (ala Abu Ghraib) and the output signal wire in such... place...

LRL guys... c'mon try it, then report here!

Kind regards,
Max

[Esteban]

OK looking at the input of this circuit what isthe perset adjustment.
What samples can i use and what adjustment do I make on the coil at the input.What would I use for Calibration of this circuit.
I would need this information so I can build and test this.
What I really need is the input signals

Each person differs in potential, I think. So, is better that the operator take the rods and other person make the adjustment of presets. A starting point is in middle.

Resistence of dry skin can be 200,000 ohms, but with transpiration is reduced to 2,000 to 3,000 ohms. So, I think the operator MUST BE USE here an antitranspirant powder when rods are in use. Also rubber shoes.

Remember that in the "chamber" the dowser put the sample or "load". For example, if you search for gold, then put a gold object inside. If you search for silver, then put a silver object inside... this is method of many dowsers, but I don't guarantee your results. This is ilustrative of DOWSERS METHODS.

This is for audio indication when you found the area with the desirable object... So adjustment is necessary in sensibility pot. of the equalizer circuit, because the presets is for adjust for any person.

No yet has been tested this circuit, maybe need several modifications.

[Theseus]

No yet has been tested this circuit, maybe need several modifications.

Yes.... quite possibly.... several modifications.

[Esteban]

Hi,


He can also put the output pair in another place... that I don't say, cause I wanna be polite...

But maybe works better... who knows...

Only way to know... as already described is that they pass a ground loop around jewels (ala Abu Ghraib) and the output signal wire in such... place...

LRL guys... c'mon try it, then report here!

Kind regards,
Max

Maybe, but you can start with this method, if you're reluctance toward LRL electronic devices (but I know you're the first phanatic of it ). If you does not find anything, walking you will diminish the size of your stomach.

[WM6]

No yet has been tested this circuit, maybe need several modifications.

Not harassed by the modifications. Here you are proven schematic and finished PCB (both freeware - sorry for mark stamp size):

[Esteban]

Not harassed by the modifications. Here you are proven schematic and finished PCB:

Of course, all projects in all terrains suffer 1,000 modifications. Or you always made the "perfect project" at first? Maybe in your mind is the perfection, but reality is very hard! Do you're prepared for the hard things?

[WM6]

Maybe in your mind is the perfection, but reality is very hard! Do you're prepared for the hard things?

Everything is tested on the ground and equipped with all NASA certificates. You need only good plutonium pinpointer (pinpointer not included) and gold is yours.

[Max]

Maybe, but you can start with this method, if you're reluctance toward LRL electronic devices (but I know you're the first phanatic of it ). If you does not find anything, walking you will diminish the size of your stomach.

Hi,
you have no sense of humor... I proprosed you a Palo Alto's style solution and you answer with that dowsing thing ???

You need PALO ALTO... belive me.

Turkish method for you... dowsing by the back...

But I think you know...

Of course, you should know about PALO ALTO...

Where all started...

Don't you know... the rule ..."Never trust an LRL you can't throw out a window" as said by the Wizard of Woz some day in PALO ALTO ???

BTW I suggest you try this PALO ALTO to be sure you understand where to put the signal line..., of course, use venezuela-oil-vaseline before apply and thanks Chavez!

Kind regards,
Max