gold gun al718

[mesy64]

Hello Friend's
Please work on my gold gun device can help. Is this a practical circuit?

Way of detecting what this circuit is formed?

Depth of detection is the charge?

This circuit to work and is suitable for all metals?

With respect

mesyna

[WM6]

Is this a practical circuit?

Could be, if you can solve given antenna data in mm (inductor in 1 layer and longer than both ferrite rods together, possible but hard to tunable), and if you do some modification to get continuous changeable frequency from say 1kHz to about 25kHz or more.

Anyway worth to try.

[bureaupro2000@yahoo.com]

Al718 GG

Hello!
Gold gun I built, but not work in Eastern Europe! We amplified and injected into the ground 5khz I had a falling signal generator to 10 cm! Otherwise a fisssss ... continued ... Tend to believe that GG clone is incomplete, or I am wrong somewhere?? The test was made in a lead plate 20x20 cm, weight 3 kg, to 2.2 m deep, buried three months ago now!

[J_Player]

Hello!
Gold gun I built, but not work in Eastern Europe! We amplified and injected into the ground 5khz I had a falling signal generator to 10 cm! Otherwise a fisssss ... continued ... Tend to believe that GG clone is incomplete, or I am wrong somewhere?? The test was made in a lead plate 20x20 cm, weight 3 kg, to 2.2 m deep, buried three months ago now!

The gold gun was originally intended to be tuned to one of three transmitters that send VLF signals in the air:

The Gold Gun has 3 ranges:

1. 9.5KHz for long distance and weak EM fields.
2. 26.7-27KHz for USA.
3. 19.2KHz England, Philippines, Greece and USSR.

http://www.geotech1.com/forums/showp...3&postcount=27

One of these three frequencies is tuned to receive a signal broadcast in the air from a remote VLF transmitter. When the receiver is brought near a treasure, then there is a change in the signal received. This is caused because airbound signals at this frequency are partially absorbed into the ground, depending on what is in the soil. This principle is well known and is still used by geologists to locate subsurface anomalies and map them during their surveys. A hand-held receiver that tunes a signal in the air broadcast from a remote transmitter is standard geological survey equipment that measures what happens to the signal when the receiver is moved near an anomaly under the ground.

Have you considered that what you built may not be a gold gun, because it does not use one of the three frequencies that a gold gun uses, nor does it receive signals from a transmitter that broadcasts RF into the air?


Best wishes,
J_P

[bureaupro2000@yahoo.com]

GG tunning?!?

Hello friends!
I think GG has been designed to find all metals and function using frequency VLF stations as long as the U.S. Marine sent! When they stopped broadcasting GG has not worked! I need a VLF signal transmitted and a GG award tuning to another frequency! If you know that gold resonates at 5-5.5 kHz, I think an award should be around this value only to find gold! What do you think?

[WM6]

If you know that gold resonates at 5-5.5 kHz,

There are different gold, dependent of impurities. Pure natural crystaline gold resonate at frequency of 1730MHz which is equal to 173mm of wavelength.

[J_Player]

Hello friends!
I think GG has been designed to find all metals and function using frequency VLF stations as long as the U.S. Marine sent! When they stopped broadcasting GG has not worked! I need a VLF signal transmitted and a GG award tuning to another frequency! If you know that gold resonates at 5-5.5 kHz, I think an award should be around this value only to find gold! What do you think?

The theory of the gold gun has never been linked to any frequency of gold. The theory is to look for variations in the signal received from a distant VLF transmitter that broadcasts signals into the air. Because metals and other anomalies under the ground can change the reception of the signal, it can be used to locate the anomalies under the ground. If you look at the original signals that the gold gun was tuned to you will see that none of them is a "gold frequency". They are only tuned to frequencies that are sent out by large VLF transmitters. The original frequencies were 9.5KHz for long distance and weak EM fields, 26.7-27KHz for USA, and 19.2KHz England, Philippines, Greece and USSR. Since these transmitters are no longer broadcasting these signals, you can use a smaller portable VLF transmitter to broadcast the same frequencies, and set them near the treasure field to put a RF signal in the air. The idea of using a supposed "gold frequency" is not related to the VLF frequency of the gold gun. "Gold frequencies" were never used as a VLF signal to operate the gold gun.

Also, note that most people who have experience with the gold gun say they were not successful in recovering gold. Only a few say it worked.

Best wishes,
J_P

[don]

Of course GG al707 working very-very well,but not so many people know how it working!

[ban]

Hello Friend's
Please work on my gold gun device can help. Is this a practical circuit?

Way of detecting what this circuit is formed?

Depth of detection is the charge?

This circuit to work and is suitable for all metals?

With respect

mesyna

what volt for diode zener and (10uf - 220uf ) in al718

[ban]

Hello Friend's
Please work on my gold gun device can help. Is this a practical circuit?

Way of detecting what this circuit is formed?

Depth of detection is the charge?

This circuit to work and is suitable for all metals?

With respect

mesyna

al718 have two switch in circuit why two switch more used, this two switch where is connect

[J_Player]

al718 have two switch in circuit why two switch more used, this two switch where is connect

This circuit is designed to detect a VLF radio signals from a large transmitter.
It cannot detect anything unless there is a transmitter broadcasting at the frequency it is set for.

It is not a practical circuit.
It will not become a practical circuit if you restore it to the original factory new condition.
It stopped being a practical circuit when the transmitters stopped broadcasting at the frequencies it receives.
Most people say it was also not a practical circuit when there were transmitters operating at those frequencies.

Switch near antenna is to set frequency for receiver. Second switch at right side for on-off is to connect power.

Best wishes,
J_P

[ban]

what 820 in gold gun al718 ( pf or nf)

[ban]

what 820 ( nf or pf ) what volt , what number this

[J_Player]

what 820 ( nf or pf ) what volt , what number this

820nf
This capacitor will not see more voltage than the ferrite coil can pick up after dissipating most of its power through diodes connected to ground.
This kind of capacitor does not usually have a choice of voltage ratings, but if you find a choice, 5v or more should work fine.


Best wishes,
J_P

[mikebg]

Ban, AL718 operates with a primitive principle. The correct principle is described in patent US 3,500,175.