PISTOL DETECTOR SCHEMATIC

[Morgan]

DC 2008

Hi Morgan.
Can you give us a photo from inside your DC2008??

Regards

I open one time,but not take photos,then i seal it again,and you know this seal is more dificult to take out becouse i use some glue...
But everything is identical of this one from Esteban,except the Passive Receiver PCB is inside black Resin.

[takhslambos]

mineoro

Ι believe that Mineoro is not good to locate a coin but it is able to locate a big treasure at 10... 30 meters distance

Regards

at last we agree.

[Geo]

I open one time,but not take photos,then i seal it again,and you know this seal is more dificult to take out becouse i use some glue...
But everything is identical of this one from Esteban,except the Passive Receiver PCB is inside black Resin.

Thank you.
I mean does it seem that it is the schematic of PCB5??? Can you see that there are 6 transistors, 2 diodes etc???

Regards

[Morgan]

PASSIVE RECEIVER

Thank you.
I mean does it seem that it is the schematic of PCB5??? Can you see that there are 6 transistors, 2 diodes etc???

Regards

Well,i not take out the black resine,but acording the DC 2008 from Esteban,this seems like a passive receiver...

[Geo]

Well,i not take out the black resine,but acording the DC 2008 from Esteban,this seems like a passive receiver...

Hi Morgan.
I agree but i believe that the pcb5 is more sensitive than the magnetic receiver who has the DC2008

Regards

[ban]

Q



why everything not salient
you can circuit download in the site nice salient

[J_Player]

why everything not salient
you can circuit download in the site nice salient

Here is a better copy of the same circuit. But nobody cares what the components are because it does not work except to detect sparks and electric fences.

Best wishes,
J_P

[Geo]

Here is a better copy of the same circuit. But nobody cares what the components are because it does not work except to detect sparks and electric fences.

Best wishes,
J_P

Hi J_P.
With o first eye ... the buzzer is connected to +12V and not to +5V.
You can edit it.

Regards

[Geo]

why everything not salient
you can circuit download in the site nice salient

Because was the first time that i worked with the Eagle program!!!

[ban]

Q

excuse me, your this circuit made if you made you can send photo for me . i want see this photo circuit ?

[J_Player]

Hi J_P.
With o first eye ... the buzzer is connected to +12V and not to +5V.
You can edit it.

Regards

Hi Geo,
You are correct. The correction is made below:

[Geo]

Sorry wrong post......

[Geo]

excuse me, your this circuit made if you made you can send photo for me . i want see this photo circuit ?

Sorry but this time i have not any photo....

[Astrodetect]

Sorry but I think there is one major mistake. The gold leaf in the middle of the ionic chamber goes to the preamp where the anode is connected not the other way around ,,to the atmel without any amplification.

[Geo]

Sorry but I think there is one major mistake. The gold leaf in the middle of the ionic chamber goes to the preamp where the anode is connected not the other way around ,,to the atmel without any amplification.

Hi Jim.
Thanks for the note but now no time to check it.
Maybe later... but maybe "no reason"

Regards