NEW PD MADE IN GREECE

[nelson]

With no doubs you have done a try an error project that finally got his reward.
I m not an electronic engenieer too, but i will keep invetigating and working on this matter, so i hope i can achive in the future success like you have done.
I will also like to know how do you test PDK? I mean if you have a test bed for testing sensibility of PDK and made some mods.? Can you detect fresh gols and silver?
Congratulations and i will PM later after work.
Best regards
Nelson

Hi Nelson

My sucess with PDK happens becouse i try in the circuit things that others never understand and never tryed before,this is becouse i´m not electronic engenieer.


[ATTACH]16315[/ATTACH]

[nelson]

Hi Morgan.
Tell me, what material is the box you are using to place the circuit. Yours looks like a plastic box.
Best regards
Nelson

My PDK

[ATTACH]16324[/ATTACH]

[ATTACH]16325[/ATTACH]

[Morgan]

PDK project

morgan hermano me da gusto que hayas conseguido el exito, mucho has trabajado en esto, ,muy bien te lo mereces champion, despues de que alonso y estaban y andreas y geo y otros, han expandido el pdk

morgan im very happy for your sucess, very much you has working in these, my congratulations for you, youre champions

Yes,was more than two years around this project.

I must say BIG THANKS to ESTEBAN, MUCHAS GRACIAS,for his precious threads with informations,not complet,but in the good LRL way

[Morgan]

PDK project

ya nadamas nos falta hermanito aft72005 que la ponga a funcionar
may be soon brodhy aft72005 too put these stuff to work

Hombre de Dios,solamente un pequeno cambyo en el P.REC. circuito,y ya esta listo,que te va a localizar oro y plata a distancia,y automatico.

[Morgan]

PDK project

We eagerly await the video.

Oh yes,and then of course,the SKEPTICS avaluation
No problem at all...

[Morgan]

PDK project

With no doubs you have done a try an error project that finally got his reward.
I m not an electronic engenieer too, but i will keep invetigating and working on this matter, so i hope i can achive in the future success like you have done.
I will also like to know how do you test PDK? I mean if you have a test bed for testing sensibility of PDK and made some mods.? Can you detect fresh gols and silver?
Congratulations and i will PM later after work.
Best regards
Nelson

Hello Nelson

The PDK can locate fresh gold in air test.

After so long time working in this project(competition with Geo and Andreas,the winers)i stay in 3rd position with this LRL,better than PD,but insignificant if we compare to Geo´s PD(who can locate fresh gold at distance).

I not go to release the my project here,but i give the KEY,you and the others(who believe) must investigate the Passive Receiver project,you can find this in esteban´s thread,this is what i have done.

My sucess is becouse i have many silver and gold objects buried LONG TIME AGO,and make the perfect TEST for LRL´s.

Regards

[Morgan]

PDK project

Hello Nelson

The PDK can locate fresh gold in air test.

After so long time working in this project(competition with Geo and Andreas,the winers)i stay in 3rd position with this LRL,better than PD,but insignificant if we compare to Geo´s PD(who can locate fresh gold at distance).

I not go to release the my project here,but i give the KEY,you and the others(who believe) must investigate the Passive Receiver project,you can find this in esteban´s thread,this is what i have done.

My sucess is becouse i have many silver and gold objects buried LONG TIME AGO,and make the perfect TEST for LRL´s.

Regards

Correction:

The PDK can not locate fresh gold in air test. Yes,if the gold as more than 1 year underground(better lop or ring ).

[Morgan]

PDK project

Hi Morgan.
Tell me, what material is the box you are using to place the circuit. Yours looks like a plastic box.
Best regards
Nelson

Well,i have built one nice wood box,MINEORO style,but after insert there the PDK circuits,the device lose the ability to find the PHENOMENA,then it retuns again to the ugly plastic box. I´m investigating what happens,i supose its becouse the 2X9V batteries proximity to the RX coil...

[WM6]

Well,i have built one nice wood box,MINEORO style,but after insert there the PDK circuits,the device lose the ability to find the PHENOMENA,then it retuns again to the ugly plastic box. I´m investigating what happens,i supose its becouse the 2X9V batteries proximity to the RX coil...

Simply: "wood is not good" for VF devices. Wood act as load to VF circuitry.

Experiment: put the same (by weight) pieces of wood and plastic in microwave oven an heat it for 2 min. Most plastic came out only lukewarm, but wood come out very hot.

[aft_72005]

ya nadamas nos falta hermanito aft72005 que la ponga a funcionar
may be soon brodhy aft72005 too put these stuff to work

Hi detectoman
How are you big brother ? I hope your health is ok
Translation by google
"and brother, we need only offer aft72005 that make operational
May be too soon brodhy aft72005 stuff to put These work"

Thanking for your wishes , but need I say here , my second clone of Morgan black PD
, working correct at lab now. Must be trying and test at historical place !!!!!
For some problems in my country, I couldn’t test it yet, but I am very sure ,
It is work correct . other thing , the person( my dear friend ) help me in the matter , I am very
Thanking from him . also I am thanks from Morgan , he brought black PD to geotech .
Best regards.

[aft_72005]

My PDK

[ATTACH]16324[/ATTACH]

[ATTACH]16325[/ATTACH]

Thank you Morgan , but strange head box is plastic!!!!!!

[nelson]

Hi Morgan and thanks for your information.

The two 9 volts batteries may detune your antena, because of the amount of metal that is close to the antenna. So try to place the batteries has far has you can from the antennas.
Yesterday i didn´t have the time to PM, so i will try later today.

Best regards and keep doing experiments with PDK.

Nelson

Well,i have built one nice wood box,MINEORO style,but after insert there the PDK circuits,the device lose the ability to find the PHENOMENA,then it retuns again to the ugly plastic box. I´m investigating what happens,i supose its becouse the 2X9V batteries proximity to the RX coil...

[Morgan]

PDK project

Thank you Morgan , but strange head box is plastic!!!!!!

The coil shell is plastic,but if you pay atention,the covering where i draw the "M" is made of paper but plastic works fine also.

So,you aready find iron nails 4m distance with your LRL,you are very near to have sucess and reject the iron. Good luck my friend.

[Morgan]

PDK clue

The coil shell is plastic,but if you pay atention,the covering where i draw the "M" is made of paper but plastic works fine also.

So,you aready find iron nails 4m distance with your LRL,you are very near to have sucess and reject the iron. Good luck my friend.

One clue for you

See one thread by Esteban where he is talking about one old LRL made by him,but with problems,he catch pieces of iron from fences very far away,he explain how to solve the problem.
I will try to find this thread.

[LRLMAN]

Hi my friend Morgan congratulation for your great job I am follow your steps in zahori forum with ZB which I constructed and even without knowing anything about electronics which in a few days I send photos to the forum and I'm very interested in this new project called PDK

Many greetings and a big hug

Mario