A theory-Please comment

[jack]

hi to all
1-Do you send a low frequency, high voltage and amps to stimulate earth metals and their reaction is severe?
2-This reaction can be downloaded by Lrod??
3-Who has the schematic for LROAD brass rods of land to filter some streaks?
4-What is the sensitivity of the orbital accuracy LROAD (brass rods) to the reaction was carried out by the brass wire is connected to the circuit?
5-What do you recommend brass rods for the circuit?
6-Brass rods should be dealt with whether the man is or insulation?
WHITH RESPECT
JACK

[WM6]

hi to all
1-Do you send a low frequency, high voltage and amps to stimulate earth metals and their reaction is severe?
2-This reaction can be downloaded by Lrod??
3-Who has the schematic for LROAD brass rods of land to filter some streaks?
4-What is the sensitivity of the orbital accuracy LROAD (brass rods) to the reaction was carried out by the brass wire is connected to the circuit?
5-What do you recommend brass rods for the circuit?
6-Brass rods should be dealt with whether the man is or insulation?
WHITH RESPECT
JACK

In field of dowsing it is not about sort of dowsing rod.

Dowsing rods are only matter of personal preference.

It is all about dowser and his extrasense ability only.

If one has extrasense ability for unconscious perception some sign in nature which are usually overlooked by ordinary people, this one has dowsing predispositions, no matter of dowsing rod they used.

Extrasensing ability can be replaced by knowledge in natural science (geology, bothanic, chemistry etc.). In this case you even do not need dowsing rod to find undergrund water, mineral ore etc. You need only to observe carefully the surroundings natural phenomena and conclude on your knowledge basis.

[jack]

TANK YOU DEAR WM6
You did not answer my questions

[WM6]

TANK YOU DEAR WM6
You did not answer my questions

I think I answered in essence, if you understand what I am saying. In topic subject you asking for theory not for practical solutions.

In your question you are trying to mix L-rod with electronic remote detecting devices. It is not the same. L-rod is dowsing utility and technicaly cannot be treated as electronic remote detecting device. And, sorry, all your questions are not clear to me.

1-Do you send a low frequency, high voltage and amps to stimulate earth metals and their reaction is severe?

You do not need to do this. There are a broad band spectrum of frequencies from natural and artifical sources down to earth, that "stimulate" metals in soil. You need only to detect proper one and correctly explain what you detect.

2-This reaction can be downloaded by Lrod??

If you are extrasensor in ULF/VLF/RF spectrum, then YES, otherwise NO.

3-Who has the schematic for LROAD brass rods of land to filter some streaks?

I dont know, and I dont fully understand this question too.

4-What is the sensitivity of the orbital accuracy LROAD (brass rods) to the reaction was carried out by the brass wire is connected to the circuit?

I dont fully understand this question.

5-What do you recommend brass rods for the circuit?

I dont fully understand this question.

6-Brass rods should be dealt with whether the man is or insulation?

According most of dowsing theories: for proper dovsing, your body need to be in direct touch with Brass rods, without any insulation between your hand and brass (or other metal or wooden/best fresh/) rods. From science poits of view dowsing rods are only tools to help dowser keep concentration on matter.

[jack]

tank you very much
I want a circuit that is sensitive to signal the brass rods of metal which is located in the basement?
What is the phenomenon which occurs when the metal is brass wires underground will be multiplied to arrive?
I want to sensitize the orbital brass rods.Diagram is similar to that shown in the picture??same spectra lrl
please help me
with respect jack

[WM6]

As I understand, you are asking for this circuit? (in this case hands have to be well isolated from brass rods):

[Morgan]

As I understand, you are asking for this circuit? (in this case hands have to be well isolated from brass rods):

I allways thougt no need a second circuit to oprerate the Rods in Karl´s MFD...

[WM6]

Or if you prefer digital with sound in conjunction with LED (you need to isolate your hand from brass rods here too):

[WM6]

I allways thougt no need a second circuit to oprerate the Rods in Karl´s MFD...

Maybe our friend "jack" know more .... people should be happy, so I gave him schematic.

[jack]

tank you very very much wm6
In general, what occurs when brass on metal wires are multiplied?
Circuits that what you are doing?
What do I have attached the circuit?

[WM6]

In general, what occurs when brass on metal wires are multiplied?
Circuits that what you are doing?
What do I have attached the circuit?

"multiplied?" - I guess nothing, you only have heavier dowsing rods.

No, I do not make this circuit - this is special schematic for born dowser only.

Connection points between circuit and dowsing rods are this:

[jack]

tank you dear wm6
For these circuits should be insulated with a brass rod?
his circuit, how to help brass rods for metal?
Reception rod is brass with more circuits?

[WM6]

For these circuits should be insulated with a brass rod?
his circuit, how to help brass rods for metal?
Reception rod is brass with more circuits?

Yes brass rod handle have to be insulated from your hand, otherwise circiut will not work.

Other questions are not clear to me, sorry. My English knowledge is too limited to decipher your words.

If you use translator, try to build as much correct sentences as you can in your native language, othervise translator give you (and me too) wordish nonsence.

[jack]

Yes brass rod handle have to be insulated from your hand, otherwise circiut will not work.

Other questions are not clear to me, sorry. My English knowledge is too limited to decipher your words.

If you use translator, try to build as much correct sentences as you can in your native language, othervise translator give you (and me too) wordish nonsence.

njegov krog, kako pomagati medeninaste palice za metal?
Sprejem palica je iz medenine z več vezij?

[Geo]

tank you very much
I want a circuit that is sensitive to signal the brass rods of metal which is located in the basement?
What is the phenomenon which occurs when the metal is brass wires underground will be multiplied to arrive?
I want to sensitize the orbital brass rods.Diagram is similar to that shown in the picture??same spectra lrl
please help me
with respect jack

You can try with a 9V battery and a 100k resistor in series with one rod. It is very strange, but with this you will have an increase at sensitivity.