mineoro fg/90

[Geo]

Originally Posted by ishtar hunter

Hi dear geo
Do you know the type of infrared transmitter and receiver lead ?

Where did you see a receiver led????

[Locator]

Hello,
do you think that Mineoro fg-90 works with the help of a radio station in VLF or MW

or it can work and without help?

[kostas87]

Originally Posted by Locator

Hello,
do you think that Mineoro fg-90 works with the help of a radio station in VLF or MW

or it can work and without help?

If you do a little research you will see that there is a possibility to activate the detector with cw waves, in the mineoro factory there is an Antenna with high power, in Portugal there is an Antenna with very high power also in Africa too. There the devices work a little.

All of them (phenomenon sensors) have never worked well in Greece except in a few isolated cases. look for devices with stable energy sources that can be detected from a short distance such as with the help of sunlight, and in theory perhaps a device that produces cw and receives the reflections of the waves, it is proven that the cw waves are recalled by the noble metal .κ.λ.π.

[Geo]

Originally Posted by Locator

Hello,
do you think that Mineoro fg-90 works with the help of a radio station in VLF or MW

or it can work and without help?

Chris, if phenomenon is strong... don't need any help.
Problem with Mineoro is that they need modify for better sensitivity so to be more workable.

[Locator]

Originally Posted by Geo

Chris, if phenomenon is strong... don't need any help.
Problem with Mineoro is that they need modify for better sensitivity so to be more workable.

George,do you believe that Mineoro FG-90 is more sensitive than FG-80?


Regards

[Geo]

Originally Posted by Locator

George,do you believe that Mineoro FG-90 is more sensitive than FG-80?


Regards

No. They have the same (exactly) receiver. Only diference is the working frequency.
Also they have same sensitivity.

[Locator]

Fg-80 works at 91khz but Fg-90 in which frequency?

[Geo]

somewhere betwen 35 and 40 khz.
I don't remember exactly, but don't you think that its critical

[humhum]

Originally Posted by Locator

Hello,
do you think that Mineoro fg-90 works with the help of a radio station in VLF or MW

or it can work and without help?

Mineoro Tube is Ionic Antenna for find from Distance precious Metal and works with very High wave (Ghz) ,
But Mineoro Electromagnetic Loop Receiver is for Locate place of buried and also for Deep meter , works with Radio waves from 50Khz to 150Khz .

[folharin]

Originally Posted by humhum

Mineoro Tube is Ionic Antenna for find from Distance precious Metal and works with very High wave (Ghz) ,
But Mineoro Electromagnetic Loop Receiver is for Locate place of buried and also for Deep meter , works with Radio waves from 50Khz to 150Khz .

I don't understand your position..ma your opinion the frequency doesn't matter then?

[humhum]

Originally Posted by folharin

I don't understand your position..ma your opinion the frequency doesn't matter then?

Here Frequencies is important and it is for carrier of Phenomenon signal , from to distance , and this carrier frequency some time is different for all Country.
PD and LRL not need big gain or sensitivity , need some info details and very long time for real calibration , all reality is this for build of a real Receiver .
We forum have all infos with details , only need time for read and experiment .
No secrets left ....

[Geo]

Most info are in this forum but there are hidden very well!!.
Every interested must read very carefully all the threads and maybe to learn the secrets.

[humhum]

Yes, that's right, Master Geo, even all of them are clearly written,
The important thing is to detect it and apply it.
Actually, the logic is very simple (except for the setting), it will be enough for the device
builders to read their comments and understand them.
Grand Master Esteban used to say that Remote sensing devices are made up of ordinary
schematics.