THE FERRITE TREASURE SENSOR

[aft_72005]

Originally Posted by Esteban

The prelude is the sintetizer or what? I remember it...

Regards

Esteban

Hi Esteban
Not synthesizer, prelude ,name of amplifier article ,published
By elector magazine .also at far past.
Best regards.

[Esteban]

Originally Posted by aft_72005

Hi Esteban
Not synthesizer, prelude ,name of amplifier article ,published
By elector magazine .also at far past.
Best regards.

Thanks very much!

Best regards

Esteban

[Esteban]

This is the Prelude, +15/0/-15V

[Max]

Originally Posted by Esteban

This is the Prelude, +15/0/-15V

Hi Esteban,
I read some older posts in this thread and seems you made a double ferrite antenna with a coil over one half, shield and cable... spacing 5mm.

OK, let me think you are talking about some VLF receiver , say some tens kilohertz, and remember me something already seen somewhere.

But what I do not understand is wich kind of signal you're looking for: 3 questions cover the topic I think at 100%.

Does the buried gold emits RF waves ?
Or the buried gold absorb some outside generated RF waves ?
Or the buried gold enhance/focalize some outside generated RF waves ?

If your device works, one of the above questions you must answer with "yes".

Otherwise I see no way that the device could work by means of being a pure RF / VLF receiver, no matter of "how" that action is performed.

Kind regards,
Max

[hung]

Originally Posted by Max

Does the buried gold emits RF waves ?
Or the buried gold absorb some outside generated RF waves ?
Or the buried gold enhance/focalize some outside generated RF waves ?

Max

I'm almost positive anybody in the remote sensing forum following this subject for years knows the answers for these simple questions.
Why not you?

'The truth is not out there'... It was always in here...
Sorry I couldn't resist.

[Fred]

Carefull Esteban, daddy is watching ...

[J_Player]

Originally Posted by hung

I'm almost positive anybody in the remote sensing forum following this subject for years knows the answers for these simple questions.
Why not you?

Hmmmm...
I have been reading the remote sensing forum for years, and I don't know for certain how Esteban believes this ferrite machine works either. Specifically, I don't know what kind of signal Esteban believes his ferrite amplifier is responding to.

You have demonstrated yourself to be very knowledgeable about these things after explaining that an iron box shields emissions from long time buried gold. Since you're almost positive anybody in the remote sensing forum following this subject for years knows the answers for these simple questions, can you tell us exactly what Esteban's ferrite is responding to when near long time buried gold?

Best wishes,
J_P

[Qiaozhi]

Originally Posted by Max

Hi Esteban,
I read some older posts in this thread and seems you made a double ferrite antenna with a coil over one half, shield and cable... spacing 5mm.

OK, let me think you are talking about some VLF receiver , say some tens kilohertz, and remember me something already seen somewhere.

But what I do not understand is wich kind of signal you're looking for: 3 questions cover the topic I think at 100%.

Does the buried gold emits RF waves ?
Or the buried gold absorb some outside generated RF waves ?
Or the buried gold enhance/focalize some outside generated RF waves ?

If your device works, one of the above questions you must answer with "yes".

Otherwise I see no way that the device could work by means of being a pure RF / VLF receiver, no matter of "how" that action is performed.

Kind regards,
Max

Originally Posted by hung

I'm almost positive anybody in the remote sensing forum following this subject for years knows the answers for these simple questions.
Why not you?

'The truth is not out there'... It was always in here...
Sorry I couldn't resist.

The hidden message in Hung's words is (since the answer is as obvious as the nose on your face) that you must be incredibly dumb to ask such a question.

Of course, "we" all know the real answer...

[Clondike Clad]

Originally Posted by Qiaozhi

The hidden message in Hung's words is (since the answer is as obvious as the nose on your face) that you must be incredibly dumb to ask such a question.

Of course, "we" all know the real answer...

RF from gold iiiiiiiiiii if it is part of a tranmitter.... JUST LOOK AT THE PICK UP OF MOST LRL...PLUS LOOK AT THE INPUT SIGNAL TRANSISTOR....OK I AM GOING TO LET THE BIG AZZ CAT OUT OF THE BAG...MOST OF THE TRANSISTORS HAVE N..O..I..S..E AND LOTS OF IT.
SO WHY ARE VERY LOW NOISE TRANSISTORS NOT BEING USED ON MOST OF THE LRLS.

[Esteban]

Originally Posted by Max

Hi Esteban,
I read some older posts in this thread and seems you made a double ferrite antenna with a coil over one half, shield and cable... spacing 5mm.

OK, let me think you are talking about some VLF receiver , say some tens kilohertz, and remember me something already seen somewhere.

But what I do not understand is wich kind of signal you're looking for: 3 questions cover the topic I think at 100%.

Does the buried gold emits RF waves ?
Or the buried gold absorb some outside generated RF waves ?
Or the buried gold enhance/focalize some outside generated RF waves ?

If your device works, one of the above questions you must answer with "yes".

Otherwise I see no way that the device could work by means of being a pure RF / VLF receiver, no matter of "how" that action is performed.

Kind regards,
Max

RF detects, magnetic system detects, microvoltmeter detects, IR-RF detects... I think conductive metals buried for long time is a kind of interference... electric, RF (maybe re-radiated), magnetic... phenomenon is very complex.

Any kind of device works, the theme is found the best... Not limit in experimentation with it.

Regards

Esteban

[Esteban]

I think this previous works, one transitor is amplifier and other is balance. Necessary reductor resistor maybe needs because rapid movement catchs spurious induction???

Also can be used for adjust MD coils, I think!

[Great_Alex]

maybe Steban doesn't know how his device work .
i don't find a reason that Steban lie and pretend to us that his device realy work . if you want to build a real device you should realize the theory of how it works , then try to change and improve it .

Originally Posted by Esteban

rapid movement catchs spurious induction???

Esteban , is it neccessary to sweep your device to find a target , when you point staright to a target in a fix position , your device has a permanent signal , or not in a moment it has a signal and the the signal disapear ?
please describe more about how you operate it and how is your device response ?

if it detect RF wave , why rapid movement make strong iduction voltage ?

[aft_72005]

Originally Posted by Esteban

This is the Prelude, +15/0/-15V

Hi Esteban
Yes, it is prelude amplifier .if I think true, also it was
With preamplifier. This is ,only amplifier.
Also in hi fi world, prelude had very good specification.
Best regards.

[alexis]

Hi Steven, I have the walkman but as I do the preamp and where I get this ferrite, thanks.

[jalfal]

Thanks a lot.

[enjoykin4]

Частота (Frequency) для:

алюминия (aluminium) (A1) равна 3245 кГц , = 3.245MHz
для меди (copper) (А2) 3872 кГц , = 3.872 MHz
для железа (A3) (iron) 4731 кГц , = 4.731 MHz
для серебра (silver) (А4) 5278 кГц , = 5.278 MHz
для золота (gold) (А5) 5621 кГц , = 5.621 MHz
для платины (platinum) (A6) 5722 кГц , = 5.722 MHz

К174ХА3, аналог NE545B

Source
http://www.realstrannik.ru/forum/29-...tml?start=1080

[abdou2014]

Is there anybody who knows how to make the double O coil 50 + 50 of esteban Pls ???