Announcement

Collapse
No announcement yet.

My TOTeM project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • please help me
    how can i Connecting passive\active switch

    pl1a
    pl1b
    ====
    pl5a
    pl5b
    pl5c

    Comment


    • Originally posted by koko View Post
      please help me
      how can i Connecting passive\active switch

      pl1a
      pl1b
      ====
      pl5a
      pl5b
      pl5c
      If you're referring to TOTeM, then please look at the diagram on page 241 in association with the schematic in Fig 14-15. The passive/active switch is a double-pole changeover (DPDT) type.

      Comment


      • Hello Qiaozhi

        Thank you very much for your Reply,please if you can help whit this photo




        Comment


        • Originally posted by koko View Post
          Hello Qiaozhi

          Thank you very much for your Reply,please if you can help whit this photo
          That is the correct type of switch, but I cannot comment on the PCB as it's been designed by someone else.

          Comment


          • My project for king PD
            is not like your project only the box
            what the problem friend of the box is equally?

            you call it a fraud??!!!

            but you stupid or what

            on the contrary it is a free advertising for your PD

            and the project is not entirely your

            Discussions on LRLs which do not include swivel methods, including "Ionic" and "Pistol Detector" devices.


            Cordially

            Nicola
            Attached Files
            God bless all - Nicolas

            << My channel >> << My shop >>

            Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

            Comment


            • Help PI detector project, 50X50cm can detect 5m, with 1x1m coil, which help me? Discrimination is not required,

              Comment


              • Originally posted by liubing View Post
                Help PI detector project, 50X50cm can detect 5m, with 1x1m coil, which help me? Discrimination is not required,


                Hi

                Look it you can find what you seek



                Good wish
                God bless all - Nicolas

                << My channel >> << My shop >>

                Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

                Comment


                • Hello, NICOLAS, delta pulse is not hit me five meters, I did, but I would like to improve on this basis, enhance it, may I ask what do you do? Thank you for your answer

                  Comment


                  • Originally posted by liubing View Post
                    Hello, NICOLAS, delta pulse is not hit me five meters, I did, but I would like to improve on this basis, enhance it, may I ask what do you do? Thank you for your answer
                    Hi you can use big frame my dear 3x3 m you can go to it deep

                    About your ask. I make and to repair any type of detectors

                    Welcom
                    Attached Files
                    God bless all - Nicolas

                    << My channel >> << My shop >>

                    Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

                    Comment


                    • Two ways to increase the power to detect:
                      1.Increased to 25 cm long ferrite
                      2.
                      Increase the output power of the transmitter
                      What do you think?

                      Knowledge is the greatest wealth

                      Comment


                      • skeptic device

                        Originally posted by mustefa ubram View Post
                        Two ways to increase the power to detect:
                        1.Increased to 25 cm long ferrite
                        2.Increase the output power of the transmitter
                        What do you think?
                        This device made by a skeptic to prove that LRL detection doesn’twork, and you trying to do modifications to make it work, doesn’t make sense.

                        regards,
                        Mosha

                        Comment


                        • Originally posted by mosha View Post
                          This device made by a skeptic to prove that LRL detection doesn’twork, and you trying to do modifications to make it work, doesn’t make sense.

                          regards,
                          Mosha
                          You cannot prove a negative.

                          The purpose of TOTeM is to allow experimenters to build an all-electronic LRL for themselves, do their own tests, and make up their own minds on the subject. It was also designed with the idea that experimenters should modify the circuit to meet their own requirements. The underlying concept of TOTeM is based on data that is freely available in the public domain. It provides both passive and active modes, and reacts to the usual laboratory tests in exactly the same way as certain other pistol detectors. It also works as well as any other all-electronic LRL on the market.

                          Skeptics often get accused of rejecting LRLs without having any personal experience, which is also one of the main reasons why TOTeM was designed, built, and tested. Many people want to build their own LRL, but have no idea where to start. That's where TOTeM comes in.

                          Comment


                          • Originally posted by Qiaozhi View Post
                            You cannot prove a negative.

                            The purpose of TOTeM is to allow experimenters to build an all-electronic LRL for themselves, do their own tests, and make up their own minds on the subject. It was also designed with the idea that experimenters should modify the circuit to meet their own requirements. The underlying concept of TOTeM is based on data that is freely available in the public domain. It provides both passive and active modes, and reacts to the usual laboratory tests in exactly the same way as certain other pistol detectors. It also works as well as any other all-electronic LRL on the market.

                            Skeptics often get accused of rejecting LRLs without having any personal experience, which is also one of the main reasons why TOTeM was designed, built, and tested. Many people want to build their own LRL, but have no idea where to start. That's where TOTeM comes in.


                            Always the Skeptics at first glance and without any experience

                            But there are so many who have succeeded in the LRLs manufacture of electronic devices effective. Like Andreas Morgan Nicolas and others.

                            Thank you for clarifying Qiaozhi
                            God bless all - Nicolas

                            << My channel >> << My shop >>

                            Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

                            Comment


                            • Originally posted by mosha View Post
                              This device made by a skeptic to prove that LRL detection doesn’twork, and you trying to do modifications to make it work, doesn’t make sense.

                              regards,
                              Mosha
                              hi mosha
                              no.I think that is practical.I remember Esteban finds many targets.I think the plan is feasible
                              Knowledge is the greatest wealth

                              Comment


                              • You can purchase an all-electronic LRL from a company like Mineoro, which involves parting with a large sum of money, and will definitely buy you an expensive education
                                OR ...
                                you can buy one from Mozzie_1957:

                                with a cast-iron guarantee that it will never find treasure in a million years
                                OR ...
                                you can build your own.

                                The problem with building your own homebrew all-electronic LRL is the lack of information on where to start. You only have to examine the available information on the Alonso PD to see how sketchy the details really are. TOTeM, on the other hand, is fully documented with nothing hidden. It is the ideal platform for those who want to experiment within this gray area of metal detecting technology. Please be aware that there is absolutely no guarantee it will lead you to endless riches. It is simply a replication of the so-called pistol detector technology. It detects sparks from a great distance, as well as a CRT television - just like the Alonso PD, and those from Morgan - which (of course) does not necessarily imply that it can catch the PHENOMENON (whatever that is). However, it provides a solid basis from which to work, and in practice you can appear to be following a signal line. As I've said many times before, I have no problem with anyone wanting to experiment with all-electronic LRLs, Any experiment is a good one.

                                Two quotes from Thomas Edison:

                                1. “Negative results are just what I want. They’re just as valuable to me as positive results. I can never find the thing that does the job best until I find the ones that don’t.”

                                2. “To invent, you need a good imagination and a pile of junk.”

                                Comment

                                Working...
                                X