PDK inside

[WM6]

For me the clue is to do same has Morgan, to buried some gold or silver and then go for a field test. This is the only way to get a real signal from buried gold or silver.

Nelson, if you build geomagnetism sensor (as we can see that some LRL manufacturer do), you can get real signal from those buried silver things with a lot of imagination only.

You only sense movement of your sensor in geomagnetic lines all other conclusions are self deception.

[aft_72005]

I agree with you and just ask who help with TOTem schematics?

Regards

Nelson

Qiaozhi is main designer and experimenter of totem PD . yes, totem designed step
By step by Qiaozhi

[Qiaozhi]

I agree with you and just ask who help with TOTem schematics?

What are you asking here?

Qiaozhi is main designer and experimenter of totem PD . yes, totem designed step
By step by Qiaozhi

Aft is correct. TOTeM is my own design based on information freely available in the public domain. It is not a clone of anybody's work. There are even some new concepts in TOTeM that enable the coils to be balanced more easily.

[Morgan]

Hi all
I think must be say something here , I asked from Geo , Morgan , Andreas , detectoman , to build really work LRL many times ago . Geo didn’t nothing only some pictures . detectoman Under my promise give me some data ( I am thanking from him) .
My request from Andreas , he help me with more data, and more circuits . also I am so thanking from Andreas .
Morgan , I gave you the circuit picture with Andreas name at below.
It was project which Andreas helped to me . I gave you this circuit without Andreas permit . I remember well that modified circuit easily detected 1.5 volt short circuit from 1 meter . also I asked Morgan , said me About Alonso Pd and other data .
But only Andreas data was very valuable for me , i did incorrect work , my false work was Without permit by Andreas, I gave circuit to Morgan . Andreas, I am sorry for my
False .

The schematic you gave me,i even not note that name Andreas ,otherwise i delete the name to protect you,i thought this was your project...
But tests in the field with the schematic NOT MODIFICATED shows not possible to locate burieds objects, after many of MY MODIFICATIONS the circuit starts locating the objects.
What Andreas give you was schematic that probaly he not get good results too,otherwise you think he offer you a good working LRL ?
I insist in this schematic becouse of the simplicity,and more easy to calibrate than the Alonsos PD


Regards

[aft_72005]

The schematic you gave me,i even not note that name Andreas ,otherwise i delete the name to protect you,i thought this was your project...
But tests in the field with the schematic NOT MODIFICATED shows not possible to locate burieds objects, after many of MY MODIFICATIONS the circuit starts locating the objects.
What Andreas give you was schematic that probaly he not get good results too,otherwise you think he offer you a good working LRL ?
I insist in this schematic becouse of the simplicity,and more easy to calibrate than the Alonsos PD


Regards

""i thought this was your project...""
No, it was common project with Andreas . But you are correct because you don’t know
This subject .
""But tests in the field with the schematic NOT MODIFICATED shows not possible to locate burieds objects""
I believe Andreas is honest man , he did real test with real target the circuit which I gave you,. It could locate long buried metals .
""What Andreas give you was schematic that probaly he not get good results too,otherwise you think he offer you a good working LRL ?""
Andreas help me Until I built modified LRL , my PD working well . also remember Andreas movie in YouTube ( Alonso clone PD) . in movie clearly show PD working .



Regards.

[aft_72005]

The schematic you gave me,i even not note that name Andreas ,otherwise i delete the name to protect you,i thought this was your project...
But tests in the field with the schematic NOT MODIFICATED shows not possible to locate burieds objects, after many of MY MODIFICATIONS the circuit starts locating the objects.
What Andreas give you was schematic that probaly he not get good results too,otherwise you think he offer you a good working LRL ?
I insist in this schematic becouse of the simplicity,and more easy to calibrate than the Alonsos PD


Regards

What are you asking here?


Aft is correct. TOTeM is my own design based on information freely available in the public domain. It is not a clone of anybody's work. There are even some new concepts in TOTeM that enable the coils to be balanced more easily.

Yes, not any part of TOTeM PD similar to other PDs . it was design 100% from basic
Step by step , until complete ready to use PD .

[vali]

metal detectors

hello qiaozhi .It is the only publication to serve the community happy detector. What we

[Qiaozhi]

hello qiaozhi .It is the only publication to serve the community happy detector. What we

I don't understand what you're asking.

[vali]

Funny

hi to all

[nelson]

Thankls for the advice, but i prefer to test this with real buried gold or silver.

Regards

Nelson

Nelson, if you build geomagnetism sensor (as we can see that some LRL manufacturer do), you can get real signal from those buried silver things with a lot of imagination only.

You only sense movement of your sensor in geomagnetic lines all other conclusions are self deception.

[nelson]

Hi Qiaozhi

I know is your own design, and i m not saying is a clone, you are correct

What are you asking here?


Aft is correct. TOTeM is my own design based on information freely available in the public domain. It is not a clone of anybody's work. There are even some new concepts in TOTeM that enable the coils to be balanced more easily.

[folharin]

this is the image attached pdk 2.2 of morgan?

[vali]

Maybe ?

[iron1944]

PDK

Dear Nelson
I am an amateur elektronikçiyim. Longrangelocators form
You said you sent PDK circuit. Despite all my research I could not find such a circuit. Can you send the same circuit in the form of longrangelocators again? thanks

[ionios]

Hello to all,
I am from Greece and i have buy a pdk from morgan,
I like to say a big thank you to morgan,
First because he is honnest about the transactions,
Second because the pdk it really works as lrl,
And third for the really valuable price,
About the rest i dont have many thinks to say,
Only that if at the position of morgan was somebody else
for a working lrl, the price will had be at list 2000-3000 euros.
and i really dont care were he found the circuit,
because nearly all the lrl are copies from somethink similar.
thank you.