Lrl from Italy

[mokkethon80]

yes u rigth afshin..what she say...soon.😂😂😂

[payam20]

hi everyone

Hello liudengyuand,
You now have 32 participations in English. You have read and written in English, but to help your friends how they helped you, you say: << My English is not good >>
It's easier to say I do not want

or say:i cant help!
is it too hard to take picture or say what you have done!
or maybe you just......as every one think.

[brs]

Hello my friends
here in this planning error

http://www.3rbz.com/uploads/86b7b7908cbc1.jpg

[payam20]

Hello my friends
here in this planning error

http://www.3rbz.com/uploads/86b7b7908cbc1.jpg

where?

[brs]

http://www.3rbz.com/uploads/f0e5e74fabf92.jpg

[mokkethon80]

woww.cool..pictr....is this real ..or not.work or not

[payam20]

http://www.3rbz.com/uploads/f0e5e74fabf92.jpg

did you ever seen schematic
and 100n capacitors beter read about theme
just for led use wire from +12 and put 1k to every possitive of led pin
as many have made this pcb they said best pcb up to now

[payam20]

woww.cool..pictr....is this real ..or not.work or not

do it and see

[mokkethon80]

😂😂😂doit 3cm..deep..

[taxma1981]

hi everyone

Hello liudengyuand,
You now have 32 participations in English. You have read and written in English, but to help your friends how they helped you, you say: << My English is not good >>
It's easier to say I do not want

[zakari]

😂😂😂doit 3cm..deep..

hi every body

payam20'pcb work very well

[zakari]

hi payam20

please put your new pcb here

that one you put in iranian forums

that is working excelent

[du6r]

dear Franco

When i be close to circuit i notes that voltage is down and when i get away from it the voltage is rise so i cant decide if the voltage is zero at the output ( when i remove the quarts )
the read of voltage to circuit is in mini volt but away off circuit its about 1.2 v
but when i but quarts the voltage when i be near to the circuit is about 5-6 v
also when i get away from it the voltage drop down to 3v ??????????????????

c13 = 3.3n
c14 =4.7 n
on place c2 c3 c4 is 1 single capacitor 1p

one more thing in working place all voltege are same reading up but when i get out the room in the (test field) evrything is change the output is near 0 volte

[FrancoItaly]

I think that the stage is self oscillating, try to decrease C13 and C14 to original value (560pF). If in open air you have 4-6V (DC output) and if you touch the antenna the signal decreases, then the lrl is ok.

[sakher]

Hello All

Is FrancoItaly device can detecting the target if it was within pottery vessel or wooden box?