Lrl from Italy

[Sneshko]

Dear Nicolas!
Thank you for Radiation Meter!
Coming strange time ... who knows? Perhaps all of us this device will be necessary...
Can you put it on forums for a free download and Programmed controller ATmega88PA-PU?
Regards!
Sneshko

[Nicolas]

Dear Nicolas!
Thank you for Radiation Meter!
Coming strange time ... who knows? Perhaps all of us this device will be necessary...
Can you put it on forums for a free download and Programmed controller ATmega88PA-PU?
Regards!
Sneshko

Hello friend welcome.
Try to get it from the site i think is not free.
I not have built it and not have the firmware sorry. only i have put to give information for all here to try it.

[enjoykin4]

Hi enjoykin4,
I do not know if such high frequencies can be operated, without a doubt in the sky there are many transmitters that can "excite" the phenomenon, but would not know how to adapt my LRL at these frequencies, perhaps it would be better to study a new circuit. As regards the long range locator IGA-1 at first glance it seems a selective amplifier that can work on different frequencies but I have problems with the Russian language, however it seems a passive receiver as the Zahori.

Best Regards

Hello Franco !!

Signore read how this ********************************************** AGAINST HIGH-END RUSSIAN LRL DETECTOR IGA-1. {75meter detection distance for underground water veins is very nice result for LRL !!)

***** Personal attack deleted *****
Regards
Enjoykin4

[Nicolas]

[QUOTE=enjoykin4;153054]
Hi dear enjoykin4.

Please need respect for all other members see this the third insult and not respect. i not have what do here go elsewhere or stay and speak with much respect we are all here for knowledge please and not be racist stay tolerant.

Because i see this behavior for person ignorant lacking knowledge or awareness in general; uneducated or unsophisticated.

[enjoykin4]

Dear Nicolas!
Thank you for Radiation Meter!
Coming strange time ... who knows? Perhaps all of us this device will be necessary...
Can you put it on forums for a free download and Programmed controller ATmega88PA-PU?
Regards!
Sneshko

Hello dear Serbian Sneshko !!

Yes very strange times .... i like to say ..... ***** DELETED ABUSE *****
Downloading link

https://www.elektormagazine.com/files/magazine/2011/dolo/110538-11.zip

Дозиметр Сталкера for SERB SNESHKO !!http://www.longrangelocators.com/for...057#post153057




***** DELETED *****

Best regards
Enjoykin4

[Nicolas]

[QUOTE=enjoykin4;153056]
Thank you Ukrainian so much interesting this projects. But relax my friend friend

[Geo]

Hi Franco.
Did you tried to give signal from generator to antenna (not directly but from some distance)?
I tried it yesterday, connected a wire 25cm to output of generator and put it at sweep operation from 65 to 165Mhz so to see where the coil of lrl is tuned. I put the antenna of lrl parallel with generaotr aerial and near to 30 cm. I did not found any frequency that lrl is tuned and the sensitivity was very low. At lrl i use a 3 turns coil with 22pf capacitor parallel with coil. Also i tried the same experiment with fm modulation but without good results (for me). Any experiment from you or any idea????

Regards

[brs]

hi Geo
Try it with bc238

[Geo]

My xtal lrl works ok.
I try to understand how exactly the phenomenon acts on it so to try make it more sensitive

[FrancoItaly]

Hi Geo,

I don't have a FM generator but I tried with an oscillator ( only 1 transistor) tuned in FM range and I had the same results, nothing, only a signal very close to antenna. The origin of the phenomenon remains for me always a mystery. However, the resonant circuit is important because if I change the values the LRL is not working. With 2 turns for L1 the lrl it's working also without 22pF as there is the parasitic capacitance of base-emitter junction.

Best Regards

[Geo]

I put the transistor on base so to make changes at mixer transistor and now lrl works better, maybe any bad soldering at pins of transistor. Now i have strong signal from 30cm distance. Lrl receives signals at 82...85Mhz and 87...88 Mhz. I"ll try to change teansistor with other types and to replace the 22pF with a variable capaqcitor (trimmer) so to change frequences. Do you think that is better to try at frequences highter than 108Mhz ????

Regards

[FrancoItaly]

Hi Geo,

If you have time you may try the range 60 - 200Mhz, the BC... series work also at 200Mhz and the trimmer it's a good idea. You can also test if there is some discrimination changing LC resonance.

Best Regards

[Geo]

Hi Franco.
I will inform if any change will give better results.
""Phainomenon"" is a very strange phainomenon....

[Qiaozhi]

Last chance

enjoykin4 - Having just spent several minutes erasing your abusive posts, rants, and derogatory pictures, it appears that you may be incapable of reading the forum rules. In particular, please read this ->

***********************************************
LRL forums historically have a tendency to bring out the worst in some people. Personal attacks and taunts will not be tolerated. This includes verbal (you're an idiot) and pictorial (posting a derogatory picture). Violations will result in an infraction and possible suspension.
***********************************************

You have already had a number of warnings, and this is your very last chance.
One more abusive post and you're out!

[enjoykin4]

***********************************************
You have already had a number of warnings, and this is your very last chance.
One more abusive post and you're out!

.................................................. .............................



OK AMERICAN SMARTY !!

I AM GOING TO MUCH BETTER PLACE THAN YOUR FORUM IS !!

YOU HAVE MY FINAL PERMISSION TO DELETE ALL MY POSTS AND ACCOUNT AT THIS FORUM !!

ASTALAVISTA MUCHACHOS !!

Enjoykin4
Enjoykin4@YANDEX.RU


ps: Ну ладно. Даже если Вы увидите Знания у человека, который предлагает их использовать, Вы не сможете это сделать, ТАК КАК В Вашей ПРОГРАММЕ НЕТ ЭТОГО ЭЛЕМЕНТА.