Lrl from Italy

[abdou2014]

Thank you

[FrancoItaly]

Dear Franco

Would I use the metal case Bc108 instead of the Bc183C?

Yes, no problem.

[darkman]

hi

hi guys miss you all >>

[abdou2014]

Thank you friend

[Arash]

New pcb franco

hi All
I assembled this pcb and tested it
I TAKE RESULTS TO SENSE METAL

[abdou2014]

can you share Layout file ?

[darkman]

hi all :


Mr franco , abdu bro hope you are OK


what did you think of this Edition of your lrl ?

https://drive.google.com/drive/folders/1UPYUqfOlZWWKDLw6Egeap3AkVPBt-WVE?usp=sharing

thx

[abdou2014]

Nice job, I hope it will work

[FrancoItaly]

I just got home, I think your project is valid, the important thing is that it works.

[Geo]

Hello Franco.
Long time......
How are you ???

My wishes

[FrancoItaly]

Hello Franco.
Long time......
How are you ???

My wishes

Hi Geo,
I'm well and you? Unfortunately I am a long time away from home and from my laboratory and also from the research fields ... I hope you are luckier.

[Geo]

Oh yes, i am home with laborator at underground.
I have one month yet before begin the works at farm.
Yesterday i took a Xtal version to see (for another time) how it works and catch the phenomeno, or how phenomenon aplied at input circuit....
I connected the scope at collector of Tr2 (mixer) and gave signal with generator (via a small wire as antenna) at input. Without input signal i had a signal of 8Mhz at Tr2 but with input signal 120Mhz i had signal about 1Khz. Why???? where are the other frequences of mixer?? (120+ 8Mhz or 120-8Mhz or the same for harmonics)????
It works as to exist a LF filter at out of mixer. Any idea???

Regards

[FrancoItaly]

Oh yes, i am home with laborator at underground.
I have one month yet before begin the works at farm.
Yesterday i took a Xtal version to see (for another time) how it works and catch the phenomeno, or how phenomenon aplied at input circuit....
I connected the scope at collector of Tr2 (mixer) and gave signal with generator (via a small wire as antenna) at input. Without input signal i had a signal of 8Mhz at Tr2 but with input signal 120Mhz i had signal about 1Khz. Why???? where are the other frequences of mixer?? (120+ 8Mhz or 120-8Mhz or the same for harmonics)????
It works as to exist a LF filter at out of mixer. Any idea???

Regards

I have no idea, but the fact is that TR2 is not really a mixer that is used for frequency conversion, if I remember well in this case the signals must be very large to make TR2 work in a non-linear way, that is to say with distortion . In the case of my lrl signals of very small amplitude are mixed.
Regards

[mc_307]

hello my fiends.,
What's the latest working document on the circuit?
and was it really a friend who could work?

[humhum]

I Think that with Franco Xtal LRL , Lucky frequency can be is with 9.736,305 Mhz .