Tweet
Oscillator works perfectly
[IMG]
[/IMG]
[IMG]
[/IMG]
-
-
Well, what is the purpose of this oscillator?Comment
-
To increase the earning
The internal oscillation will be in MHz
Increase the sensitivity until you discover this phenomenon from the antennaComment
-
Is this system more sensitive than my original lrl? when the sensitivity is such that the compass effect appears, well this means that it is useless to further increase the gain. As I said before the inside oscillator only serves to create a mixer with the phenomenon. It serves to make sure there is always a stable signal at the sensor stage output, even in the absence of the phenomenon.Originally posted by shahrayar View PostComment
-
My dear Franco, it is the original I made it before in this way, but due to the lack of capabilities to measure the signal, I used only simulations, and it turns out that most of these programs are a hoax
But with the new simulation program, I discovered my mistakes
Perhaps you studied in universities and schools, but I did not study in universities and schools, and you know your system from me, I am just learningComment
-
Originally posted by FrancoItaly View Post
Now I understand that we do not need an oscillator, we need a gold phenomenon in order to activate the oscillator
The emulator program is : SIRCUITMAKER2000Comment
-
I too have not studied electronics at school like you, but I have over 50 years of experience and I studied on my own. I use multisim but not to check the functioning of a circuit but to find the appropriate values, for example, related to a certain frequency.Originally posted by shahrayar View PostNow I understand that we do not need an oscillator, we need a gold phenomenon in order to activate the oscillator
The emulator program is : SIRCUITMAKER2000Comment
-
Since you were twenty and you have been learning, then you are a teacher
Comment
-
Now that you have modified it, it is affected back by hand
For example, when rounded to the TV, the three lights are on, and when the hand is rounded 30 cm away, the lights start to turn offComment
-
As I said before, all tests with TV or mobile phones, however inside a house, are worthless. The only test, to be carried out if possible outdoors, is to touch the antenna and (after adjusting the threshold to have the first LED just lit) check that the LED turns off. This guarantees that all the electronic part of the lrl works correctly. Obviously the final test is in the field.Originally posted by shahrayar View PostComment
-
Thank you dear Franco
Now it looks good to me. In the Roman square near my house, I will try to see the result. This Roman square is rich in treasuresComment
-
Experiment with TV wave
Comment
-
old civilizations
if anyone wants to test his Lrl which he made himself, i have places where the rocks are big and there are engraved signs on them,such as having a cross sign on the rock, snake, turtle circles, and arrows these signs are old civilizations and their meaning treasure signs my problem is i dont have lrl check site with signs of old civilization if anyone wants to see signs i can send a video clip from that place to every one ho is interested for this placeComment
-
I don't think my lrl has a range of more than 20/30 meters (as I think most of the others). Are you sure you don't have a compass effect? If the signal remains constant going in that direction it is almost certainly this effect.Originally posted by walkmanMy franco2 video link
signal direction east of franco. Range 700-800mtComment
-
But walkman is saying..direction is east.
Not north-south direction
How can it be compass effect
Can bobins' direction have effectComment
Comment