Lrl from Italy

[omar]

Hello Franco. The phenomenon is an invisible light beam of negative electrons similar to a cathode ray. It is the resonance of the material. What you lack is a transmitter circuit to raise the kinetic energy of the photoelectrons, so that they can be easily captured. Your device captures them as stray signals from close distances.

[FrancoItaly]

Hello Franco. The phenomenon is an invisible light beam of negative electrons similar to a cathode ray. It is the resonance of the material. What you lack is a transmitter circuit to raise the kinetic energy of the photoelectrons, so that they can be easily captured. Your device captures them as stray signals from close distances.

I doubt anyone knows exactly how the phenomenon works, we just know that it works over a wide range of frequencies. All the rest are theories to be proved without considering that whatever is transmitted must reach tens of meters away and be directive. I am convinced that all lrls are passive receivers and even if there is a transmitting led, it cannot get very far.

[Babak51]

Lrl Franco

Hello. I had good discoveries. Thank you, Mr. Franco, Italy. Although the radius of my discoveries was not more than 4 meters, but I love the circuit of this device. Thank you.

[Babak51]

Has anyone experimented with using an aluminum box to install the entire circuit? Will it have any effect?

Not because it is said to interfere with signal reception.

[FrancoItaly]

Hello. I had good discoveries. Thank you, Mr. Franco, Italy. Although the radius of my discoveries was not more than 4 meters, but I love the circuit of this device. Thank you.

I am happy that you have had good results with my lrl and I thank you for having said it publicly for the benefit of those who do not believe in the phenomenon or at least are in doubt. Other forum members confirmed it privately but asked me not to disclose it.

[Pahom]

Hello. I had good discoveries. Thank you, Mr. Franco, Italy. Although the radius of my discoveries was not more than 4 meters, but I love the circuit of this device. Thank you.

Which version of the schema did you achieve good results with?

[Babak51]

lrl franco

This design and circuit of Mr. Franco, which has been slightly strengthened by our good friends, and of course it is much better to increase the distance of the sensor from the discipline. However, it is very powerful and sensitive.

[Babak51]

I am happy that you have had good results with my lrl and I thank you for having said it publicly for the benefit of those who do not believe in the phenomenon or at least are in doubt. Other forum members confirmed it privately but asked me not to disclose it.

Dear Mr. Franco. The art is to be a man of action, not just talking ... I buried a few pieces of metal in the ground in a private property several years ago, and I practice there at least once a week, training myself and my systems. I challenge. Dear Mr. Franco, I have recently emailed you a sample of my discoveries in private so that you can be briefly appreciated.I apologize for the translations and spelling mistakes
Your friend Babak

[Babak51]

I am happy that you have had good results with my lrl and I thank you for having said it publicly for the benefit of those who do not believe in the phenomenon or at least are in doubt. Other forum members confirmed it privately but asked me not to disclose it.

Thank you dear Francois. We strive to spend from time to time in cash to enjoy exploring and exploring. And we owe the good results to you and your tracker design (lrl franco)

[Babak51]

Why some people do not succeed

Here are some tips to help you get started:

1-Your device is not properly configured.
2-These systems are out of balance with even a very small amount of displacement and an increase or decrease in height.
3-This tracking system is not for distance and radius and you must pass over a buried or buried metal to make a complete and accurate sense.
4-The effect of this phenomenon is not the same and powerful everywhere.
5-In order for the operator to move when exploring, it must first be from north to south and then from south to north (valuable for sensing non ferrous metals).
6-Enough practice. Test and test locations. And you do not have old metal buried.

Thanks to my teacher Mr. Franco from Italy

[FrancoItaly]

Here are some tips to help you get started:

1-Your device is not properly configured.
2-These systems are out of balance with even a very small amount of displacement and an increase or decrease in height.
3-This tracking system is not for distance and radius and you must pass over a buried or buried metal to make a complete and accurate sense.
4-The effect of this phenomenon is not the same and powerful everywhere.
5-In order for the operator to move when exploring, it must first be from north to south and then from south to north (valuable for sensing non ferrous metals).
6-Enough practice. Test and test locations. And you do not have old metal buried.

Thanks to my teacher Mr. Franco from Italy

Thank you for your contribution which will certainly be useful to the new members of the forum, who perhaps are in doubt about the actual functioning of the lrls.

[Babak51]

lrl franco

https://youtu.be/oABgObXsA8M

You have to try to reach the goal...
Bury scrap metal in a place for practice and testing ...
It is not enough to talk, try ...
I buried different metals in several places and even in the mountains 6 years ago ...
With the guidance of my friends, I built the Franco machine and tried to understand it...
And I must admit that I owe all my good results to my good friends, especially Mr. Franco from Italy....

[Babak51]

lrl franco

https://youtu.be/UXcZoiyqouw

Lrl Franco works well

[kaveh]

Hello to all Many thanks to Mr. Franco and my dear friend Babak This circuit works well I have seen its success The Franco circuit is a powerful and excellent static finder, which makes it powerful and good for precious metals Thank you very much Mehdi Moein

[FrancoItaly]

Hello to all Many thanks to Mr. Franco and my dear friend Babak This circuit works well I have seen its success The Franco circuit is a powerful and excellent static finder, which makes it powerful and good for precious metals Thank you very much Mehdi Moein

I always like the confirmations of the good functioning of my lrl, this is also useful for those who approach our forum and maybe they are a little incredulous about the effectiveness on a type of tool that, according to official science, cannot work.