Lrl from Italy

[Jeg]

https://www.youtube.com/watch?v=ZNoytV-mPKs

Great job Erdogan!

[JHERICKU]

what version did you use my friend?did u able to eliminate the oscillation?

[ERDOGAN37]

My project is attached

[humhum]

Two coil for more small cap .

[humhum]

Best Low Bat Indicator ..

[Jeg]

Two coil for more small cap .

niccce humhum!


I used the first technique recently (speaker wire) and its really very convenient.

[folharin]

I did all the franco circuits. Here in Brazil it doesn't work, not even in the test field...:n?o n?o::carranca:

[Jeg]

I did all the franco circuits. Here in Brazil it doesn't work, not even in the test field...:n?o n?o::carranca:

Hi folharin

How old is your test field?
What indication method did you pick up for your receiver?
Have you tested a voltmeter in place of leds?
Can you share how did you confirm that your device is built successfully?
Do you own an oscilloscope?

Thanks

[humhum]

I did all the franco circuits. Here in Brazil it doesn't work, not even in the test field...:n?o n?o::carranca:

For your country You can use FM Receive method and frequency of big master Esteban .

[tasmen]

Hi Mr Franco

I created version on 20Mhz (crystal 14Mhz). How can adjust to pot 1,2,3 and c10 to get the maximum performance to one harmonic?
I have not oscilloscope.
I can measure volts at the output?
The value i have to get?

Thank you in advance.

[FrancoItaly]

Hi Mr Franco

I created version on 20Mhz (crystal 14Mhz). How can adjust to pot 1,2,3 and c10 to get the maximum performance to one harmonic?
I have not oscilloscope.
I can measure volts at the output?
The value i have to get?

Thank you in advance.

Measurements must be made at the sensor stage output (direct voltage). C10 needs to be adjusted for maximum output. Obviously you have to follow the instructions of the helps, no signal must be there without the quartz and others.

[brain]

hello franco lrl, is it electrostatic or electromagnetic, can I get some information?

[FrancoItaly]

hello franco lrl, is it electrostatic or electromagnetic, can I get some information?

I think it's electromagnetic, I can't tell you more.

[ERDOGAN37]

LRL project

https://youtube.com/shorts/4oYFSPlzWvc?feature=share

Thanks Franco

[FrancoItaly]

https://youtube.com/shorts/4oYFSPlzWvc?feature=share

Thanks Franco

Which version of my lrl did you make?