need mfd

[Geo]

Hi Geo,
Irony can be healthy sometimes.

Let it... its another story

[Geo]

hi geo
The transformer at the output frequency will cause instability.Strongly.Oscillating about 1 kHz to more
To solve this problem, what solution do you recommend?

I can't solve your problem. My MFD has not same problems.
I will try to upload some photos from my MFD

[ma330]

I can't solve your problem. My MFD has not same problems.
I will try to upload some photos from my MFD

hi to all
What is your opinion about the use of a stereo amplifier?

[Fred]

Let it... its another story

Ok Geo

I am still trying to find a proof or genuine video of a reliably working LRL.

Good luck,
Fred

[J_Player]

Ok Geo

I am still trying to find a proof or genuine video of a reliably working LRL.

Good luck,
Fred

Hi Fred,
There is no proof...
There are only stories...
From MFD users and from Carl-NC

Also, there are some tests that Carl-NC witnessed.


Best wishes,
J_P

[ma330]

hi to all
What is the most accurate frequency for gold?
Brass rod is in contact with the hand is better or insulation?

[WM6]

hi to all
What is the most accurate frequency for gold?
Brass rod is in contact with the hand is better or insulation?

Without bare contact there is not real dowsing possible and dowsing rod is out of its real function.

[ma330]

Without bare contact there is not real dowsing possible and dowsing rod is out of its real function.

tank you wm6
The brass rod is connected to an oscillator?
The best way to find the exact spot with brass rods how?
Can you show me a drawing?

[WM6]

The brass rod is connected to an oscillator?
The best way to find the exact spot with brass rods how?
Can you show me a drawing?

Hi ma330
If you wish to discuss your problem, then you need to show us your problem in form of drawing.
Otherwise we can discuss here dowsing principle only. Nobody can read your mind.

[ma330]

hi to all
What is best for those with metal and brass rods are in contact And does not impact on the frequency of 5 kHz?

[WM6]

It depend of your electronic circuit solution. No matter of frequency you use.

If your electronic implies your body sensory system (biofeedback) then YES, brass rod need to be in galvanic contact with your body.

If your electronic does not implies your body sensory system (biofeedback) then NO, brass rod should not to be in galvanic contact with your body.

[ma330]

I made a positive output mfd with a wireless connection to the land.
My generator has a very high stability when connected to ground

[WM6]

I made a positive output mfd with a wireless connection to the land.
My generator has a very high stability when connected to ground

Great. Congratulations.

[ma330]

How can i understand where the metal bars is specified?Or non-metal
What method do you recommend?

[WM6]

How can i understand where the metal bars is specified?Or non-metal
What method do you recommend?

You must have this in gene. This is genetic question, cause this is (despite using electronic) dowsing rod only.