need mfd

[Geo]

A member ask from me to attach here the pcb of Carl's MFD because he can't read the geotech.
Its here ...

[ma330]

for kalkale

And a member asked me about the schematic
kalkale ,pcb is correct There is no problem.
for kalkale

[ma330]

hi wm6 and j-p and geo and other freinds
I worked with my mfd.Bars indicate one point, according to j-p.

http://www.longrangelocators.com/forums/showpost.php?p=141681&postcount=10

http://www.longrangelocators.com/forums/showpost.php?p=141684&postcount=13

I dug into the specified location and took out a stone at a depth of 120 cm.
my lrl detect Was evident in the stone.
How do I make the distinction between rock and metal veins?
How do I filter would only reveal rocks and minerals and metals?

[WM6]

I dug into the specified location and took out a stone at a depth of 120 cm.
my lrl detect Was evident in the stone.

What sort of stone you dug, Ferro ore?

[ma330]

What sort of stone you dug, Ferro ore?

Ordinary stone

[WM6]

Ordinary stone

You detected this with earth probe and dowsing rods?

[ma330]

You detected this with earth probe and dowsing rods?

yes wm6
This was the rock line signals
I want to filter out the bars with an electronic circuit
please help me

[WM6]

yes wm6
This was the rock line signals
I want to filter out the bars with an electronic circuit
please help me

If you use resistivity meter with earth probe, then with most stone you get high resistivity and with metallic deposit low resistivity. Converting to frequency stone respond to low and metallic deposit to high frequency.

So, as first, your earth probe have to be connected to earth resistivity responsive signal generator and as second you need to follow those frequency changes in comparison to earth resistivity standard which you get by 3th earth probe.

How this frequency changes can be received by dowsing rod sensor is out of my knowledge. I think you will lost your youth before you realised, that you need to be born dowser to be successful this dowsing way.

[ma330]

If you use resistivity meter with earth probe, then with most stone you get high resistivity and with metallic deposit low resistivity. Converting to frequency stone respond to low and metallic deposit to high frequency.

So, as first, your earth probe have to be connected to earth resistivity responsive signal generator and as second you need to follow those frequency changes in comparison to earth resistivity standard which you get by 3th earth probe.

How this frequency changes can be received by dowsing rod sensor is out of my knowledge. I think you will lost your youth before you realised, that you need to be born dowser to be successful this dowsing way.

tank you wm6

[oroboy]

ground radio

http://forums.qrz.com/showthread.php?231002-Through-Ground-Radio-(Below-500-KHz)&

[WM6]

http://forums.qrz.com/showthread.php?231002-Through-Ground-Radio-(Below-500-KHz)&

Yes, this ground conductivity (apparent of ground resistivity) VLF method has some potential. Worth for further research. But not in connection with dowsing rods.

[ma330]

for kakale

[ma330]

hi to all
What is the best in class amplifier to boost the frequency to penetrate to the ground(for mfd)?
A?B?...?
please answer
TANK YOU

[WM6]

Trick is not in force, but in correct measurement.

You can use one 5-10W audio amplifier chip.

But if you still trying with L-rod combination, you probably need 5-10kV pp to sense something.

[Dell Winders]

This is the most often used kind of MFD which some people say they have success with: http://www.geotech1.com/cgi-bin/page...mfd1/index.dat
You can find instructions also for making the rods here: http://www.geotech1.com/cgi-bin/page...lrl1/index.dat
This is the same kind that Dell Winders sells as Omnitron, and many others make copies.



When you finish the circuit you can connect the signal out (+) and (-) to the two brass rods that you push into the ground.
Turn R5 to make adjustment of how much voltage you send to the brass rods.
Turn S2 to switch to different frequency.
S1 is to turn off power.


Best wishes,
J_P

J PLAYER, you are so full of BS, you couldn't tell the truth if your life depended on it.

Shame on you for posting false information to unsuspecting viewers. Dell