Ivconic's Negative Ion Detector circuit

[fmnotes]

hello

please, help me?

If you want to tell me about this plan.

I want a change in the plan.

when the incoming signal is low, the beep is not continuous but slow sound beep beep beep. Slow sound.

when the signal is most powerful, the sound beep how fast, beepbeepbeepbeep.
and when the signal is too loud, the sound beep sequential, ie beeeeeeeeeeeeeeeeeeep ............

anyone who knows please help me

THANKS

[Geo]

hello

please, help me?

If you want to tell me about this plan.

I want a change in the plan.

when the incoming signal is low, the beep is not continuous but slow sound beep beep beep. Slow sound.

when the signal is most powerful, the sound beep how fast, beepbeepbeepbeep.
and when the signal is too loud, the sound beep sequential, ie beeeeeeeeeeeeeeeeeeep ............

anyone who knows please help me

THANKS

You must use a VCO. I have not something complete...

[fmnotes]

You must use a VCO. I have not something complete...

Thank geo.

I had this in my mind to use.

This is the picture, think you might be used?

If so, you know how to make better use?

thanks

[Anwar2]

hay gays
befor than starting this projet Idont want to be silly because i hade build quad scop it wont work
now Iwant to ask about the middle pin of Variabl Resistor its will work as fixed resistor not varibal because the midd pin not conected

[J_Player]

hay gays
befor than starting this projet Idont want to be silly because i hade build quad scop it wont work
now Iwant to ask about the middle pin of Variabl Resistor its will work as fixed resistor not varibal because the midd pin not conected

See below:

[Anwar2]

See below:

thanks J _ player for Replay what u mean the both resistance are = one of the 3 pin othe also 3 pin see my attach

see my Question befor what it was
I mean if dont connect the middle pin of the resistance it will be fixed resistance unseful to put varibal on fixed place

[J_Player]

thanks J _ player for Replay what u mean the both resistance are = one of the 3 pin othe also 3 pin see my attach

see my Question befor what it was
I mean if dont connect the middle pin of the resistance it will be fixed resistance unseful to put varibal on fixed place

See correct way to connect variable resistor below:

[Dell Winders]

In my tests, Mineoro, does indeed work. I particularly found the electronic depth locator interesting as it beeped when placed at the target's 45 degree emanating field at the same locations as detected with the MFD L-Rods.

Unfortunately, when there is atmospheric Magnetic interference and the MFD, or HID Rod(s) do not respond to the target, or react weak, the Mineoro, will NOT detect the target either. Magnetic conditions have to be favorable for any of the LRL's to work. Brazil, apparently has favorable conditions for LRL's to work. Since 1987 the USA has NOT had favorable Magnetic conditions for LRL to work consistently.

When the Strength of field is fluctuating up & down, it is aggravating having to constantly re-tune the Mineoro from one minute to the next. If you live in the USA you will likely find the Mineoro will work sporadicly as it did when Field tested under conditions in Central Florida.

I remember over 20 years ago when Ralph Shull, sold an electronic receiver LRL, to a friend of mine who stayed for a week with Shull, to train & test the LRL. They would work the beach at Atlantic City, NJ every day and consistently found coins & jewelry. My friend was very happy with the results, purchased the LRL and took it back to his home in Pa., 150 miles away. The LRL would not work there at all. Shull, sent him another one. It didn't work either. My friend took the LRL's back to NJ, to get a refund. They tested them, and both worked perfectly under the favorable conditions just 150 miles away.

You should understand the limitations of any type of LRL, before you decide to purchase. Unfortunately for consumers, most LRL manufacturers, and sellers don't inform you of this limitation. Dell

[Qiaozhi]

My friend was very happy with the results, purchased the LRL and took it back to his home in Pa., 150 miles away. The LRL would not work there at all. Shull, sent him another one. It didn't work either. My friend took the LRL's back to NJ, to get a refund. They tested them, and both worked perfectly under the favorable conditions just 150 miles away.

I don't suppose this is the last time we'll hear this excuse either.
At least this is one time when LRLs are consistent.

[Anwar2]

See correct way to connect variable resistor below:

my friend ithink Im borring u

how could be
see attach

[Anwar2]

Im dont know how to make u to understand
and what i mean see the attach

[Qiaozhi]

my friend ithink Im borring u

how could be
see attach

Anwar2 - it is clear, from your inability to wire up a simple potentiometer, that you have an extremely limited knowledge of electronics. May I suggest that you study some basic electronics books before attempting to build anything.

[Anwar2]

Anwar2 - it is clear, from your inability to wire up a simple potentiometer, that you have an extremely limited knowledge of electronics. May I suggest that you study some basic electronics books before attempting to build anything.

your true gru Ithink I have to study basic book but Im 100% sure I got 26 years exper
in Electronic may my english weak but Im sure Im true .......I suggest all of u to revice ur knowledge and hope to give others true information .....not as some

[humhum]

In my tests, Mineoro, does indeed work. I particularly found the electronic depth locator interesting as it beeped when placed at the target's 45 degree emanating field at the same locations as detected with the MFD L-Rods.

Unfortunately, when there is atmospheric Magnetic interference and the MFD, or HID Rod(s) do not respond to the target, or react weak, the Mineoro, will NOT detect the target either. Magnetic conditions have to be favorable for any of the LRL's to work. Brazil, apparently has favorable conditions for LRL's to work. Since 1987 the USA has NOT had favorable Magnetic conditions for LRL to work consistently.

When the Strength of field is fluctuating up & down, it is aggravating having to constantly re-tune the Mineoro from one minute to the next. If you live in the USA you will likely find the Mineoro will work sporadicly as it did when Field tested under conditions in Central Florida.

I remember over 20 years ago when Ralph Shull, sold an electronic receiver LRL, to a friend of mine who stayed for a week with Shull, to train & test the LRL. They would work the beach at Atlantic City, NJ every day and consistently found coins & jewelry. My friend was very happy with the results, purchased the LRL and took it back to his home in Pa., 150 miles away. The LRL would not work there at all. Shull, sent him another one. It didn't work either. My friend took the LRL's back to NJ, to get a refund. They tested them, and both worked perfectly under the favorable conditions just 150 miles away.

You should understand the limitations of any type of LRL, before you decide to purchase. Unfortunately for consumers, most LRL manufacturers, and sellers don't inform you of this limitation. Dell

Hi Dell Winders, Mineoro realy works only in warm and coastal areas, I make test with my device (like Mineoro) it not works if is so:
1.if Device is under green leafing and tree-branch (especially pine-tree) .
2.if sun have very strong eruption(11-15 hours).
3. Winter not works , because humidity is high.
4. if treasure is into green plant ,my device can not found, because plant leafing absobrb free Ions from treasure.
5. For found of treasure ,need Weather without waft ure.

I live on the coast in Turkey
Despite these conditions i get signal from big treasure of few kilometers during the summer days night.
My Device is good for very Long range, it not good for short range.


Regards.

[Geo]

My Device is good for very Long range, it not good for short range.


Regards.

Here are all the problems.... how to pin-point.
Of course if the depth is lower than 20 cm you can use a metal detector, else way..

Regards