Gold Gun AL718

[taxma1981]

hear people say it does not work with its own transmitter, How about you; I HAVE COORDINATED 19.58 khz and has importance every day,,sorry for my English

[Nicolas]

hear people say it does not work with its own transmitter, How about you; I HAVE COORDINATED 19.58 khz and has importance every day,,sorry for my English

Yes ok I understand that but if not have transmitter in your region you can make that. but I speak about resonance to catch Gold or metal by this frequency
if your gold gun work with this frequency mean receive only the frequency send by transmitter not by metal and that is wrong dear and not find Gold we need the resonance not need frequency of transmitter. here is many VlF transmitter in world

https://www.youtube.com/watch?v=WnoI9c8eqi4&feature=youtu.be Part #1

[Nicolas]

https://www.youtube.com/watch?v=xkECD199ZkQ&feature=youtu.be part #2

[taxma1981]

The point is that a 555 can not do something on his own, nice video NIKOLAS

[taxma1981]

https://www.youtube.com/watch?v=0dxXXGc3NyY&feature=youtu.be

[taxma1981]

new antenna 61 mh

http://postimg.org/image/aevocm4kj

[Long Ranger]

Hi to all
Does anyone have a schematic of the gold gun AL 718 transmitter? This receiver works well but i don't have the original transmitter and my transmitter does not match well with Receiver.
please help me.

I believe I may have gotten the Gold Gun al707 to work--but, I got too close to some power lines...now it has lost most of it's sensitivity. It now needs to be checked out by someone who can replace capacitors etc.

I need Carl to sell me his Gold Gun!

[Long Ranger]

I have reason to believe that the Gold Gun is an excellent--and, a workable Receiver, if one can simply get the proper transmitter interfaced with it. As a Stand-Alone, it is of little if any use at all. Before I burned something on the circuit board, I got a reading of 850 mVolts, at just under one mile distance (0.82). It's a known gold mine, owned by a friend, in NE Washington State. It's a complex ore type lode. I got another good reading with my now defunct Gold Gun Al 707--that I have yet to check out, with with my White's Sierra Madre--with 25' or 15' Karbowski coil. I really love that setup. Also have the White's Pulse Scan TDI, with 16' Nugget Finder coil.

While I've had great success with a swivel rod and my transmitters--I have not been content to leave "well enough alone". With my Architraun System, I have been able to get very consistent audible / metered signals, on targets the size of a jewelry box, at three hundred feet. It is all well in the realm of known and established physics. More than that, I do not care to say. If it were broadly known--it would totally revolutionize metal detection systems, forever! It's a cat that could never be put back into the proverbial bag.

I've also learned how to take frequency readings from Google Earth Images. I have named that the Eagletraun System. This too, has proven to be quit successful for me. I actually pinpointed six dore' bars, in Texas, while I was in Central Washington. And, there is much more to that story, that will have to be put on hold, until I can work out an agreement, with the land owner, with respect to the main deposit--which I also pinpointed, with the Eagletraun, from a distance of aprox 2k miles.

[Long Ranger]

David

Hi to all
Does anyone have a schematic of the gold gun AL 718 transmitter? This receiver works well but i don't have the original transmitter and my transmitter does not match well with Receiver.
please help me.

A friend gave me his al-707. Both ferrite rods were broken, as a result of careless handling. It is now pretty much junk. If I could find another one cheap, I would see what I could do with it.

[Mike(Mont)]

Seems easy enough to replace and rewind the ferrite rods. Pretty sure somewhere there is a schematic that shows what it needed. I haven't worked with one but I know the rods have a spacing between the ends and this might need to be tuned.

[taxma1981]

Does anyone know in the circuit of the gold gun what is this blue or red cable that starts from the input of the mpf102 and where does it go?

https://ibb.co/kgFyBLq

[Pahom]

Does anyone know in the circuit of the gold gun what is this blue or red cable that starts from the input of the mpf102 and where does it go?


https://ibb.co/kgFyBLq

There is a board on the first page, you will find the answer there.

[taxma1981]

ground the one input of the coil through a 1 nf capasitor in series;

[Pahom]

ground the one input of the coil through a 1 nf capasitor in series;

Right . Amazing installation. It?s probably more convenient for the manufacturer to do this.

[Agraz]

For the gold gun 707 and to gain greater sensitivity, touch the male connector (negative) where the meter is connected with your hand, do not use the meter for this test, only use the audio amplifier