Real clone Alonso-PD

[HaFar2010]

Yes, it's a lot better than non-ferrous metals. In this case I will publish a new movie.
If the ferrite is not adjusted properly, it does not make any difference between the metals, but if properly adjusted, the non-ferrous metals will have the best reaction and will react to poor ferrous metals.
Come to see our videos on our telegram channel.

See the Link

https://youtu.be/ABZSqZKeS5U

[teo]

Alonso-PD you are working

[kostask]

files for alonso pd

Hi to all
Please put here a link for alonso pd final correct design as one zip file include:
Part list
Schematic,
PCB
Box design
And any thing and tips we need to build it, thanks.

[zakari]

See the Link
https://youtu.be/ABZSqZKeS5U

Hi all
mr hafar20 this video belong to the mr mehdi(m.a.m)'s pd not for your pd
please share your pd clip if you have succeed to make that

Best regards
zakari

[abdou2014]

it's the TOTEM in the video not alonso pd , and you have a complet project of TOTEM in the forum

[zakari]

it's the TOTEM in the video not alonso pd , and you have a complet project of TOTEM in the forum

Hi abdou how are you my habib friend?
Yes you are right .in the video is totem device
mr mehi tested that and share in the net for the first time
Best regard
zakari

[abdou2014]

i'm fine thanks

[bureaupro2000@yahoo.com]

I found some spots and one of them is a metal, i don't know what kind of metal it is, but also was detected by a normal metal detector, this is a big object because was detected by a garrett metal detector with a multipliers for depth Garrett Grand Master Hunter CX II

As I said, I can not know what kind of metal is because it is located below a large round planter and I can not destroy it.

And the PD, must be connected the ferrite-omega together.

The only position of omega working how a metal detector.

LRLMAN.

Okay, with this look! But what is the permeability of the coils?

[bureaupro2000@yahoo.com]

Does anyone know the inductance of the ferrite coil?

[humhum]

LC

Does anyone know the inductance of the ferrite coil?

Inductance of the ferrite coil and paralel capasitor to him You will set for around ( the nearest ) Radio station

for example : ( the nearest ) XX Radio station transmitt in 59.941 KHz , now you will set your Receiver coil for him with this calculator.

https://goodcalculators.com/resonant-frequency-calculator/

[abdou2014]

you mean we set our LRL near Time signal frequencies ?
and how for those who are very far from Time signal broadcast ?
can we set our LRL on LW radio station ?

[humhum]

you mean we set our LRL near Time signal frequencies ?
and how for those who are very far from Time signal broadcast ?
can we set our LRL on LW radio station ?

Yes, if you can receive Radio station with your radio device in your around , for LW if, signal is wery strong also , Yes .

[abdou2014]

I think we do not need stimulation if we have the ability to detect a radio station with our LRL, do you have the same opinion?

[humhum]

I think we do not need stimulation if we have the ability to detect a radio station with our LRL, do you have the same opinion?

No , I not think so ,Stimulator is other story .

[abdou2014]

I built a very sensitive LF LRL, I can search with a variable capacitor between 50 and 100 kHz, it captures any station a hundred miles away or very weak electric phenomenon