Free project PDK

[Nicolas]

I made a PDK, and now I'm picky about it.

Hello
Sorry if come and answer late.




Please read those topic to fi, dany advice and solution

http://www.longrangelocators.com/forums/showthread.php?t=18560

http://www.longrangelocators.com/forums/showthread.php?t=18822

http://www.longrangelocators.com/forums/showthread.php?t=18592

http://www.longrangelocators.com/forums/showthread.php?t=18145

http://www.longrangelocators.com/forums/showthread.php?t=18560&page=4

Very nice design also PCB conception.


My congratulation

[humhum]

Capacitor C1.2 is wrong.
Replace it with 470pf or don't connect it.
It is not necessary

Hi Master Geo , in my test C1.2 very necessary to me for very big Power.

[QH2520QH2]

Humhum

master

Hello

What is the parameter of your coil?

Thick line diameter

How many circles

How much inductance

Thank you for guidance

[humhum]

Humhum

master

Hello

What is the parameter of your coil?

Thick line diameter

How many circles

How much inductance

Thank you for guidance

Was with Ferrite coil and Resonant Freq.adj to 78Khz, also I make Test for more power with Simulation. (C1.2)

[QH2520QH2]

PDK

I made a PDK.
It is impossible to detect.
It should be a lack of transmitting circuit.

[QH2520QH2]

pdk

I made a PDK.
It is impossible to detect.
It should be a lack of transmitting circuit.

[abdou2014]

if you add a stimulator 1.2 you must change R13 by potentiometer ???

[abdou2014]

MY PDK

http://www.longrangelocators.com/forums/showpost.php?p=156439&postcount=264

[zixelll]

help

What are these two?

http://uupload.ir/files/qil_sans_titre.gif

[abdou2014]

this photo is before the modification, below the regulator, above the plug of the parallel capacitor .

[Arash]

new pcb pdk

new 1 layer pdk pcb

[zakari]

hi my friend arash


this is very good job thank you but this pcb is the first version of pdk without oscillator


best regards

zakari

[Arash]

hi my friend arash


this is very good job thank you but this pcb is the first version of pdk without oscillator


best regards

zakari

hi my friend
yes. this is original pdk without change
and you can use oscillator for all projects pdk , and get better result

[teo]

For you Arash the new pcd is ok I can canoeing

[teo]

for you arash pcd error 2 resistor 4.7 do not exist on pcd trimer 10 k wrong