Announcement

Collapse
No announcement yet.

Andy Flind MFD.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • thank you very much.

    Comment


    • I know that testing these devices with the hand of a watch or a battery spark or a lighter spark or a mobile phone in contact mode or ....... does not mean a useful function for finding buried precious metals.
      Maybe you are trying to perform these tests from further distances with changes in the circuit, but keep in mind that these tests do not mean receiving the effect of metal metals from farther distances, and in some cases it is even completely the opposite and not useful.
      You have to look at the matter realistically. There is no simulation.
      The path to progress is only in building, taking steps and testing in the real environment, that is, only testing in the real environment and measuring the results.

      Comment


      • These tests are good in case that u want a to fint better sensitivity without the using of special instruments
        Geo

        Comment


        • Eeee?????

          hello fellow hunters. I would like the opinion of those of you who have tried Andy flind circuit 1 out hunting. are the readings taken from the target continuous or with a break in the signal for some seconds like an alarm??

          Comment


          • ???

            the signal i am getting what signal is it? magnetic, electric? Or.....????

            Comment


            • @

              the circuit I use is a coil, preamplifier and Andy Flind's circuit 1 with its conversions.

              Comment


              • @

                anyone who doesn't want to answer publicly should send me a private message. Thanks.

                Comment


                • O

                  Happy new year with health to everyone.

                  Comment


                  • Originally posted by Zicos View Post
                    hello fellow hunters. I would like the opinion of those of you who have tried Andy flind circuit 1 out hunting. are the readings taken from the target continuousC or with a break in the signal for some seconds like an alarm??
                    continuous....
                    Geo

                    Comment


                    • Originally posted by Zicos View Post
                      the signal i am getting what signal is it? magnetic, electric? Or.....????
                      magnetic....
                      Geo

                      Comment


                      • Originally posted by Zicos View Post
                        anyone who doesn't want to answer publicly should send me a private message. Thanks.
                        If we use p.m for answers then who is the rοle of the forum and why Carl to pay for it ???
                        Geo

                        Comment


                        • Originally posted by Zicos View Post
                          Happy new year with health to everyone.
                          The best wishes and by me!!!
                          Geo

                          Comment


                          • Happy

                            thank you very much for the replies Mr. Geo. The reason I say private message is because I see in the forum posts most of you ask for an email to give some information. I have no problem being answered publicly or writing my questions and experiences from my tests publicly. many wishes for everyone.

                            Comment


                            • Andy flind 1

                              with my Andy flind in the woods I pass a signal from 25 meters away. the signal starts with three leds lighting up and as I get closer to the source of the signal all 10 leds light up. the point is 4*4 meters where all the LEDs light up. but the signal lasts for 5 seconds and then it goes away and after some seconds it gets it again and again the same thing. what am i getting???? In a test drive I went to, it doesn't catch anything. only in the forest.

                              Comment


                              • Q

                                I've dug a lot and pulled out a lot of scraps of copper and aluminum and iron but it still rings. the same fragments are everywhere in the area of 400 acres, but I pass the signal only there, nowhere else.

                                Comment

                                Working...
                                X