Announcement

Collapse
No announcement yet.

ALONSO PD MISSION ACCOMPLISHED V1,V2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by humhum View Post
    I can't measure my setting FM receiving frequency , because it is very power low signal ,
    , IF of some FM receiver is 10.7 Mhz , IF of AM receiver is 455Khz , This is after
    mixing of input and local OSC , but TDA7000 not use 10.7Mhz , only few Khz .

    about IF see this link :

    The wireless RF receiver poses many signal-recovery challenges, so several increasingly effective radio receiver architectures are available to overcome...

    https://www.analogictips.com/radio-r...rt-2-zero-sdr/
    exactly this point you also concluded the analysis as I arrived at this same conclusion

    Comment


    • : |

      Comment


      • Originally posted by folharin View Post
        exactly this point you also concluded the analysis as I arrived at this same conclusion
        You mean that , Your exactly result can't measure setting FM receiving frequency or
        phenomenon ?
        ( because it is very power low signal )

        Comment


        • I believe that any radio can work.

          Comment


          • Originally posted by humhum View Post
            You mean that , Your exactly result can't measure setting FM receiving frequency or
            phenomenon ?
            ( because it is very power low signal )
            exactly!

            Comment


            • hello i noticed that gold is sensitive between 84-86mhz on the oscilloscope screen
              humhum x osilator has an effect on the phenomenon

              Comment


              • Originally posted by brain View Post
                hello i noticed that gold is sensitive between 84-86mhz on the oscilloscope screen
                humhum x osilator has an effect on the phenomenon
                Hi Brain , this is Very Good , peak center Freq 85 Mhz in Your Country .

                Comment


                • Originally posted by brain View Post
                  hello i noticed that gold is sensitive between 84-86mhz on the oscilloscope screen
                  humhum x osilator has an effect on the phenomenon
                  and khz? already tested?

                  Comment


                  • Hello dear members,

                    Are you talking that you measured oscillation of piece of gold, using oscope and some kind a home made circuitry?? Some one can please explain me how do you measure gold frequency with an oscilloscope??

                    Comment


                    • no..the test is done with buried gold!

                      Comment


                      • Originally posted by humhum View Post
                        Hi Brain , this is Very Good , peak center Freq 85 Mhz in Your Country .
                        Hello HUM HUM thanks for the answer before my question ... and I just mentioned what is the function of an oscillator in an LRL detector ..... stimulating the receiving antenna (increasing its sensitivity) of an Lrl detector o only serve to impact a buried target of much more than yellow metal or white and generate a stimulating phenomenon surrounding this buried metal ???

                        And on the other hand I would like to ask you what would be the Maximum central frequency in Mhz or Khz for Mexico ????

                        Regards.....LRLMAN.

                        Comment


                        • The harmonic frequency depends on the most powerful transmitting device in the area being searched. And for this reason, the frequency is different everywhere.

                          Comment


                          • Originally posted by Morgan View Post
                            is this your DCH85 , or using other model?

                            What is 555 frequency?

                            Comment


                            • transmitter for What is 555 frequency?

                              Comment


                              • Originally posted by Morgan View Post
                                the Alonso PD use the metal detector circuit HeatKit, its a TR/IB sistem, according Esteban a BFO with cristal controler is the best for stability, I want to try but the cristal is hard to find...

                                here schematic

                                hello, is the morgan bfo detector sample suitable for your business?

                                Comment

                                Working...
                                X