Mineoro210-part2-sensor

[Alexismex]

better

[Rudy]

better

That has got to be the worst soldering job I have ever seen in my life !
Obviously Quality Control is not one of their manufacturing fortes.

[Carl-NC]

That has got to be the worst soldering job I have ever seen in my life !

Then you haven't seen the inside of LRLs made by Neil Pagel, Dell Winders, or Vincent Blanes... they truly are an embarrassment.

[Dell Winders]

Originally Posted by Rudy
That has got to be the worst soldering job I have ever seen in my life !
Then you haven't seen the inside of LRLs made by Neil Pagel, Dell Winders, or Vincent Blanes... they truly are an embarrassment. -Carl

That's true about me I admit it. The units I build are homemade. I have no electronic training, or proper equipment. My soldering is improving, but my eyesight is poor.

This is one of the first units I built myself. I'm learning. Dell

[Qiaozhi]

That has got to be the worst soldering job I have ever seen in my life !
Obviously Quality Control is not one of their manufacturing fortes.

In fact this is probably one of the better scams.
This board looks worse in the photo than it is in reality. If I recall correctly, Alexismex removed the black gunk that was covering this board to expose it in its full glory.

[Dell Winders]

If I recall correctly, Alexismex removed the black gunk that was covering this board to expose it in its full glory.

That must have been an unintelligent waste of time and effort but, kids do play. Dell

[Carl-NC]

Dell, what would we find if the epoxy were removed from your pictured Pro-4? Would there be a speaker voice coil glued inside a potentiometer casing?

I'm curious... is a speaker coil glued in a pot casing a hidden insult to the people who buy your equipment?

- Carl

[Jim]

Watch the Swindler Squirm

That must have been an unintelligent waste of time and effort but, kids do play. Dell

That’s a real fine how-do-ya-do from someone with your honesty and integrity. It is refreshing to see these scam artist, such as Dell Winders, squirm beneath the microscope.

[Dell Winders]

Carl, is the one trying to pull a Scam on his viewers. I have no idea what he is talking about? This is the second time he has made this inference. He doesn't even say where he got the componnent pictured, or if he field tested whatever it came from?

Another example of when idiots pretend to be Scientific. Dell

[Carl-NC]

I pulled it out of the epoxied portion of a Dell Systems GS Pro.

Would you like to pretend that you know nothing about this? Or that it's somehow my fault?

[Qiaozhi]

I pulled it out of the epoxied portion of a Dell Systems GS Pro.

Would you like to pretend that you know nothing about this? Or that it's somehow my fault?

I don't believe that Dell does know anything. He's already stated this himself.

I have no electronic training, or proper equipment.
Another example of when idiots pretend to be Scientific. Dell

Actually these are two seperate quotes, but they go together quite nicely (don't you think?) and they're not taken out of context.

[strujas]

Alexismex you had started something , you should to finish it,, we need a better photo of big board (routing layer) , list of parts for big board and top side of small board, thats a 30 minutes of your time, hurry up.......

[Qiaozhi]

Alexismex you had started something , you should to finish it,, we need a better photo of big board (routing layer) , list of parts for big board and top side of small board, thats a 30 minutes of your time, hurry up.......

Crikey! You've certainly been working on your motivational skills.

[aft_72005]

Hi Alexismex
About this board :can you read program stored
In 2051 micro. Controller . may be protected .
This board how it works ?
Are you observation waveforms at input or output ?
If yes ,please upload .

[Max]

Hi Alexismex

About this board :can you read program stored
In 2051 micro. Controller . may be protected .
This board how it works ?
Are you observation waveforms at input or output ?

If yes ,please upload .

Read the other posts