MINEORO 2008 MODS.

[abdou2014]

Hi

anybody know dimension of main PCB ? i asked for some members here .. nobody didn't help . i decided begin draw PCB

on this prototype there is only electric and electromagnetic receiver, there is not magnetic RX.

[aft_72005]

Hi friend, i told you ANDY is better only about magnetic part, not electromagnetic receiver,
I had a car accident and I'm sick, sorry if I don't respond.

I hope you get better as soon as possible.

[aft_72005]

on this prototype there is only electric and electromagnetic receiver, there is not magnetic RX.

yes ..i know .

[abdou2014]

I hope you get better as soon as possible.

Thank you

[aft_72005]

Hi

anybody know dimension of main PCB ? i asked for some members here .. nobody didn't help . i decided begin draw PCB

Since my request was unanswered and people here had the PCB plan... I calculated the dimensions myself and started to draw the PCB.

[fmnotes]

Since my request was unanswered and people here had the PCB plan... I calculated the dimensions myself and started to draw the PCB.

I inform you that even if you have completed the circuit of this machine,
and the additional circuit board
it is not at all easy to tune it and in general to set it up and be able to work properly.

[aft_72005]

I inform you that even if you have completed the circuit of this machine,
and the additional circuit board
it is not at all easy to tune it and in general to set it up and be able to work properly.

Yes . Setting it up is not an easy task. But I want to try myself. Do you have any information about this?

[fmnotes]

Yes . Setting it up is not an easy task. But I want to try myself. Do you have any information about this?

I am the owner of fg80. ?I have also built a second identical machine fg80

[aft_72005]

I am the owner of fg80. ?I have also built a second identical machine fg80

Does your homemade FG80 circuit work properly?

[fmnotes]

Does your homemade FG80 circuit work properly?

After much effort I was able to set it up correctly, and it works very well

[aft_72005]

After much effort I was able to set it up correctly, and it works very well

very good and say you ....congratulations
I have read the semi-working circuits of Mineoro published in this forum and I believe that Mineoro should work.
Of course, there is no complete information here.

[Jeg]

After much effort I was able to set it up correctly, and it works very well

Hi fmnotes.
Thanks for sharing your experience.

Does your device work every day or does it need "special conditions"?



Thank you

[fmnotes]

Hi fmnotes.
Thanks for sharing your experience.

Does your device work every day or does it need "special conditions"?



Thank you

Except for days with excessive humidity.
And also away from high voltage power lines

[Jeg]

Except for days with excessive humidity.
And also away from high voltage power lines

Thank you so much fmnotes! This is very hopeful!! May i ask what kind of batteries are you using for supplying this device?

[fmnotes]

Thank you so much fmnotes! This is very hopeful!! May i ask what kind of batteries are you using for supplying this device?

In one, the company's machine, the original one, that is, I use the alkaline batteries recommended by the company. In the second device I made I have an external power supply and I feed it with a battery that is hung on the shoulder, with a cable that I connect externally to the detector machine.