Announcement

Collapse
No announcement yet.

dr. Best Ultimate Single Chip Two Antennas LRL

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • J_Player
    replied
    Originally posted by Max
    It's a joke...

    as you can see... if don't focus attention enough or haven't skills required you can be tricked very easy by some pseudo-working lrl schematic...

    But , at least, people here who made the joke at the end tell you !
    Grrrr....
    I resent your blasphemous remarks!

    I have been counting on the Dr. Best pyramidal logarithmic quadro spiral antenna to replace my dated carbon-litz technology. And my entire financial future depends on successfully building a flexible nonconductive wave guide to guarantee success in finding fabulous treasures with an LRL.
    Now you come and tell us it's all a joke?

    Where there is a will, there is a way.
    I will find a way to prove (at least to myself) that all unknown technologies shown above are true science!

    Best wishes,
    J_P

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by nelson View Post
    Hi Fred, so you didn´t made the divice?
    Well, i think that must be something of thru on this, but if no one mede it, it will be impossible to know if is a fake or if it really have a chance to work.
    Regards
    Nelson
    Hi Nelson,

    This whole thread is a spoof. WM6 is pulling your leg.

    Leave a comment:


  • Max
    replied
    Originally posted by nelson View Post
    Hi Fred, so you didn´t made the divice?
    Well, i think that must be something of thru on this, but if no one mede it, it will be impossible to know if is a fake or if it really have a chance to work.
    Regards
    Nelson
    It's a joke...

    as you can see... if don't focus attention enough or haven't skills required you can be tricked very easy by some pseudo-working lrl schematic...

    But , at least, people here who made the joke at the end tell you !

    Some perseverate years posting lunatic circuits... that will never work in reality.

    Kind regards,
    Max

    Leave a comment:


  • nelson
    replied
    Hi Fred, so you didn´t made the divice?
    Well, i think that must be something of thru on this, but if no one mede it, it will be impossible to know if is a fake or if it really have a chance to work.
    Regards
    Nelson


    Originally posted by Fred View Post
    Just´kidding Neslon, dont waste your time !

    Leave a comment:


  • Fred
    replied
    Originally posted by nelson View Post
    Hi Fred.
    About this divice, have you got any succsess.
    Today i just order the chip for this project, so please let us know more about your expirencies.
    Kind regards
    Nelson
    Just´kidding Neslon, dont waste your time !

    Leave a comment:


  • nelson
    replied
    Hi Fred.
    About this divice, have you got any succsess.
    Today i just order the chip for this project, so please let us know more about your expirencies.
    Kind regards
    Nelson


    Originally posted by Fred View Post
    Ok ,
    already built this one from your picture,
    Is this close enough ?
    I detect many things but not sure of size of treasures.
    There is gold everywhere in my house and i suppose it is making interferences.
    The closer one coming from the coaxial connectors that connect to the antenna itself
    Tried to scrap it but surely some atoms remains.
    Please help me i need to find a treasure urgently!

    Leave a comment:


  • nelson
    replied
    I had build this too has an antenna for hams bands
    Can anyone, tell me how to cennect this spiral antena to the divice show here, cause for hamradio, you use aligator clips to conect the antenna. One goes to the coax shield and the other goes to the center of the coax. But in this divise seems that the te start pont of the spiral and the end of the spiral for one side, connects to L1 and the other connects to L2, is this correct?
    Regards
    Nelson


    Originally posted by Fred View Post
    Ok ,
    already built this one from your picture,
    Is this close enough ?
    I detect many things but not sure of size of treasures.
    There is gold everywhere in my house and i suppose it is making interferences.
    The closer one coming from the coaxial connectors that connect to the antenna itself
    Tried to scrap it but surely some atoms remains.
    Please help me i need to find a treasure urgently!

    Leave a comment:


  • J_Player
    replied
    Originally posted by Fred
    The nonconductive ((flexible) waveguide i was referring to are the ones you used to connect both spirals in the picture of your post #24 :

    I have noticed the your pictures are shrinking and will soon reach the stamp size- synonym of supreme perfection in the LRL world.
    Hi Fred,
    I see your version of the spiral coil seems to show some degree of radiant EM energy, probably caused by heavy ionization in the vicinity of the coil/nonconductive flexible wave guide. I also see the image of the Dr. Best pyramidal logarithmic quadro spiral antenna is radiating in several colors and only using carbon-litz technology (personally I think there is a flexible nonconductive wave guide concealed under the cone). Are these flexible non-conductive wave guides secret technology taken from space alien ships? Is this what causes these antennas to radiate colors and to shrink to the size of supreme perfection in the LRL world?

    If these antennas continue to shrink, then they will eventually reach the dimensions of quantum energies, and will take on a timeless character which allows to travel to the past for viewing the original time of burying the metal. This is the ultimate form of the LRL perfection. Maybe we need to be careful with these flexible non-conductive wave guides, so we can return to the correct present time with the treasures?

    Best wishes,
    J_P
    Attached Files

    Leave a comment:


  • Fred
    replied
    The nonconductive ((flexible) waveguide i was referring to are the ones you used to connect both spirals in the picture of your post #24 :

    Click image for larger version

Name:	LRL final SP.JPG
Views:	1
Size:	20.3 KB
ID:	85967

    I have noticed the your pictures are shrinking and will soon reach the stamp size- synonym of supreme perfection in the LRL world.

    Leave a comment:


  • WM6
    replied
    Originally posted by Fred View Post
    I have been experimenting and found that after your non-conductive waveguide .
    Hey Fred, this is not nonconducting waveguide, this is Hi Tech carbon shielding (delicate litz wire inside).

    As you stated, triple spiral, middle conductor connected to ground point for shielding role.

    But there is quite considerable reason in your proposal.

    But at last, all data was given, go on work boys!

    Leave a comment:


  • WM6
    replied
    Originally posted by Max View Post
    You guys forgot to add an autoreversing magnetic spin accelerator.... all this stuff will not work without... I warned you!

    Also, will be useful some spare plutonium rod to generate energy required....

    But I think Dr. Best found alternatives already, like cold fusion cells... made of tungsten doped with cerium oxides.

    btw.... I miss that issue of Russian Journal of Physics...

    Kind regards,
    Max
    It seems strong to me that your faith in this magnificent project is not strong enough?
    I guess Estebans doubt to him undermine you?
    Don't forget that LRL community count on your support.

    Leave a comment:


  • Fred
    replied
    I have been experimenting and found that after your non-conductive waveguide i could make also a non-conductive spiral antenna, by ionising gas.
    Actually the antenna istself and ionising circuits are already done :

    Click image for larger version

Name:	p328957b.jpg
Views:	1
Size:	6.2 KB
ID:	85966

    It has certain advantages at night, and it is a proven fact that with it you dig less empty holes (for small targets) than with spiral coils made of conventional materials.
    Note that this is a double spitral antena, not triple like yours.

    Leave a comment:


  • Max
    replied
    Originally posted by WM6 View Post
    Hi J_P

    You are right.

    But for now we have only complete data for flat spiral sensor.

    Dr Best is allowed only to publish picture of (from previous medium development phase), conical testing sensor without any data. But maybe someone can try to build this sensor too, according picture.


    I wonder what will be next step..

    Kind regards,
    Max

    Leave a comment:


  • WM6
    replied
    Originally posted by J_Player View Post
    Hi WM6,
    After reading the Russian Physics Journal excerpt, I can see that the double spiral antenna (while an improvement over the single spiral), still has serious limitations in the signal to noise ratio. ie: The spiral coil must be localized in the volume of the RF field being detected, a very uniform field must be created by a transmitting coil.

    Now, considering we are searching for gold, the dual spiral coil antenna will not be centered in a uniform gold RF field. Knowing that the gold signal is "shot in a signal line", a treasure hunter would have to be very lucky to be holding the antenna in the middle of this "shot signal" by chance. Therefore we can expect he will be getting a very poor signal to noise ratio with much random beeping until he gets lucky enough to cross into a gold signal line with the antenna. In addition, he will need to continually adjust the rotation, hoping to achieve proper phasing while searching for a gold signal line to position the antenna. I can see how treasure hunting could take some long time when using this dual spiral antenna.

    For this reason I think it is of urgent importance to secure the design details for the advanced pyramidal logarithmic quadro spiral antenna. With the pyramidal logarithmic design, the reception will no longer be restricted to the limitations of law-1: b = a ln(1 + k φ) , and because it is a quadro design, the side-lobes of the gold signal are not lost as in the single and dual spiral designs. Is there any chance we will see some construction details for the pyramidal logarithmic quadro spiral antenna?

    Best wishes,
    J_P
    Hi J_P

    You are right.

    But for now we have only complete data for flat spiral sensor.

    Dr Best is allowed only to publish picture of (from previous medium development phase), conical testing sensor without any data. But maybe someone can try to build this sensor too, according picture.
    Attached Files

    Leave a comment:


  • Max
    replied
    You guys forgot to add an autoreversing magnetic spin accelerator.... all this stuff will not work without... I warned you!

    Also, will be useful some spare plutonium rod to generate energy required....

    But I think Dr. Best found alternatives already, like cold fusion cells... made of tungsten doped with cerium oxides.

    btw.... I miss that issue of Russian Journal of Physics...

    Kind regards,
    Max

    Leave a comment:

Working...
X