dr. Best Ultimate Single Chip Two Antennas LRL

[Dell Winders]

The most rational explanation would be that it was stolen.

But the pseudo-scientific mind would have you believe that it was teleported somewhere by little green men.

Of course it was stolen? But by who? in one night? How? A 3 story steel beam building , that took a year to construct, mounted on cement, and all it's contents disappear with out a trace in 8 hours. No tire marks, no sounds of heavy equipment. No evidence of anything. Nothing.

The police are baffled. Scientist are baffled. How is it humanly possible?

Come on, wise guy, give us a Scientific explanation? Dell

"Stupid is , as Stupid thinks"

[aft_72005]

Hi aft_72005,

Did you build dr. Best Ultimate Single Chip Two Antennas LRL ?
or you build other electrostatic detector ?

Did you get any result with build LRL or electrostatic detector, yet ?
I work on a schematic that can detect both negative and positive ions,
and welcome to anybody to complete it ...!!!

Hi GOLDENSKULL
Did you build dr. Best Ultimate Single Chip Two Antennas LRL ?
No

Did you get any result with build LRL or electrostatic detector, yet ?
No, yet

[Carl-NC]

I would be interested in knowing a scientific explanation for a big 3 story barn disappearing without a trace one night from the Mcoomb property in upstate NY.? Dell

Where can one read about this mysterious disappearing barn?

[Max]

Hi max,

I have waiting for your answer...

Hi,
which spoof ? sorry for latency, I cannot answer before.

No, made a different schematic, always using Dr. Best's directives and the log quadratic antenna, plus 1/4 dipole one and internal ferrite.

But this work just at 1/2 mile distance, not much.

Best regards,
Max

[Max]

Hi aft_72005,

Did you build dr. Best Ultimate Single Chip Two Antennas LRL ?
or you build other electrostatic detector ?

Did you get any result with build LRL or electrostatic detector, yet ?
I work on a schematic that can detect both negative and positive ions,
and welcome to anybody to complete it ...!!!

It's hybrid detector: you detect ions (positive, from buried metals) as long with some RF signal emitted by them.

Kind regards,
Max

[GOLDENSKULL]

Hi Max,

Did you build dr. Best Ultimate Single Chip Two Antennas LRL ?
Did you get any result with building it to detect remote signals...?

[Esteban]

Hi Max,

Did you build dr. Best Ultimate Single Chip Two Antennas LRL ?
Did you get any result with building it to detect remote signals...?

Again, do you understand? Is a joke!

[Theseus]

Again, do you understand? Is a joke!

Sometimes it is hard to tell which "claims" are jokes and which are intended to be serious. Many similarities....

[Max]

Hi Max,

Did you build dr. Best Ultimate Single Chip Two Antennas LRL ?
Did you get any result with building it to detect remote signals...?

I made all Dr. Best's projects, but with many modifications.

I added ferrite from Esteban-Alonso secret files, also I added 1/4 dipole antenna and parabolic reflector. I added also electrostatic conductive shield in the back of the antenna, and of course, I use a microcontroller thing (atmel stuff) to collect data arriving by receivers (more than one). The internal ADC of the atmel let me digitize data and colect over a simple SD memory card 512MB.

The device has about 200 presets now , and I can switch from one to the other just with a few clicks (I equipped the thing with an LCD 20x4 and made a menu for options...).

The idea is mixing various signals and use which in that particular scenario is more promising. I plan to add magnetometer sensors in differential gradiometer configuration, I wanna emulate EPE mag stuff and integrate with actual thing. I plan also to add an ultra fast ADC and lock-in-amplifier for faint RFLR front end, as well as a graphical interface (I'm thinking at sony PSP stuff loaded with linux and openGL directives/program to generate real time visual display of signals received, like happens in some OKM things)

The core part is made all around the single chip antenna , but , as said there are many add-ons.

Still lot of work to do, but I think I will break 1 mile detection very soon.

Kind regards,
Max

[J_Player]

I made all Dr. Best's projects, but with many modifications.

I added ferrite from Esteban-Alonso secret files, also I added 1/4 dipole antenna and parabolic reflector. I added also electrostatic conductive shield in the back of the antenna, and of course, I use a microcontroller thing (atmel stuff) to collect data arriving by receivers (more than one). The internal ADC of the atmel let me digitize data and colect over a simple SD memory card 512MB.

The device has about 200 presets now , and I can switch from one to the other just with a few clicks (I equipped the thing with an LCD 20x4 and made a menu for options...).

The idea is mixing various signals and use which in that particular scenario is more promising. I plan to add magnetometer sensors in differential gradiometer configuration, I wanna emulate EPE mag stuff and integrate with actual thing. I plan also to add an ultra fast ADC and lock-in-amplifier for faint RFLR front end, as well as a graphical interface (I'm thinking at sony PSP stuff loaded with linux and openGL directives/program to generate real time visual display of signals received, like happens in some OKM things)

The core part is made all around the single chip antenna , but , as said there are many add-ons.

Still lot of work to do, but I think I will break 1 mile detection very soon.

Kind regards,
Max

Hi Max,
Did you put a SQUID amplifier in the first stage with cyrogenic SiGe transistors? If you did, how many channels did you use?
Did you use time multiplexing before sending the SQUID signals to the ambient temperature amplifiers and filters with all the presets?

Best wishes,
J_P

[Max]

Hi Max,
Did you put a SQUID amplifier in the first stage with cyrogenic SiGe transistors? If you did, how many channels did you use?
Did you use time multiplexing before sending the SQUID signals to the ambient temperature amplifiers and filters with all the presets?

Best wishes,
J_P

Hi JP,
I use a cryogenic module to make amplification and impedance separation between squid section and the room temperature data acquisition hardware.

The cryogenic amplifier is made around an OPA350 ic running at -196°C using liquid nitrogen inside dewar insulated vacuum flask.

The device has its output connected to a fast sample/hold and 8 way, 16-bit ADC made by analog devices and then the signals are routed to the system memory bank , as said an SD card of 512MB capacity.

The 16-bit adc allow the creation of 8 separate channels , each of one is monitored by software/firmware of MCU to provide reliable graphical and numerical informations to the user.

The time multiplexing is implemented directly at squid level, using time slots defined in the MCU software. The squid interface is driven by a fiber-optic link to avoid cross noise with the analog signal from preamp, cause of the strict positioning required by cables to the dewar container, that must be as small as possible to avoid eccessive boiling of the coolant fluid...

I'm planning further development using Dr. Best's latest patch for the pyramidal logaritmic single chip antenna.

Kind regards,
Max

[WM6]

I'm planning further development using Dr. Best's latest patch for the pyramidal logaritmic single chip antenna.

Kind regards,
Max

Are you planning to attend a remote sensonic carnival in Rio de Janeiro?
Dr Best will be there and you can exchange experiences.

[Max]

Are you planning to attend a remote sensonic carnival in Rio de Janeiro?
Dr Best will be there and you can exchange experiences.

Hi,
yes I will be there too... looking for chicks...

Uhm, I wanna first meet Dr Best there to discuss about the latest developments of his projects, and antennas....

Then I will go for chicks.

First duty then the pleasure....

Midnight... is all night!


Kind regards,
Max

[nick_f]

Hi Fred,
The problem is all the gold artifacts inside your house are causing the antenna to give signals stronger than the signals from buried treasure. If you can't move your antenna, then you should shield your gold items in your house so you can detect new treasures. You can wrap all your gold items in platinum foil or screening (make sure the platinum shields are grounded to earth ground). This will effectively shield the gold signal from the antenna. When finished with shielding the gold inside your house, then replace the gold coax connectors at the antenna with aluminum or stainless steel. And also be careful if you have any gold fillings in your teeth. If you cannot have your gold fillings removed, then shield them with platinum foil too. Any remaining signals you pick up will be from new treasure, not from interferences.

Hope this helps.

Best wishes,
J_P

Wow, you mean a LRL won't be able to detect treasures burried in the ground, if they are covered with platinum foil??? Isn't platinum foil a treasure in its own right? I bet it is more expensive than gold itself!

I like the advice to shield your gold fillings with platinum foil! Don't forget to ground the foil to the ground!

Regards,
Nicolae

[WM6]

Nicolae, please don't joking, this is a serious tread.