Simple but brilliant LRL

[WM6]

Hi Funfinder,

thanks for interesting wiki drawings.

It is someway wrong, valid only in case that Koerper is not isolated from soil. If it is isolated (eg PU soles) Koerper get positive charge (especially from windy, dry and hot air). You can easily check this by pocked radio layed on ground by bring your finger close to the antenna. It sounds nice leap sparks.

[Funfinder]

@ WM6
Correct, the grafic was from wikipedia, findable by inputting filename into google:

http://www.google.com/search?hl=en&q...l=&oq=&gs_rfai=

exactly from this page, everyone really interrested in electrostatic should have read:

http://de.wikipedia.org/wiki/Elektrostatisches_Feld_der_Erde

(no working website translator available ? - at least google & babelfish does not work)

http://translate.google.com/translate?js=y&prev=_t&hl=de&ie=UTF-8&layout=1&eotf=1&u=http%3A%2F%2Fde.wikipedia.org%2Fwiki%2FElektrostatisches_Feld_der_Erde&sl=de&tl=en

I'm wearing shoes with PU soles but I'm not shure they really will isolate enough.

Some days ago I touched an electic fence for cattle and still had been electricuted. The sparks was ca. 3-5mm - so the voltage was around 10kV. No problem for me, also burned (nice technique for filigran brandings!) already little holes in my skin by putting alu-foil with a sharp edge over my plasma-ball.

I can try it with a pocket radio how good the isolation works.

But something else:
WM6, if you are really that good informed can you tell us how that "wire, pipe & power - detector" above could have been build just by some usual NPN-transistors?

And it really detects pure electrostatic, too, not just 220w ac, I've tested this already.

[WM6]

But something else:
WM6, if you are really that good informed can you tell us how that "wire, pipe & power - detector" above could have been build just by some usual NPN-transistors?

And it really detects pure electrostatic, too, not just 220w ac, I've tested this already.

FET or NPN, principle are the same. Read my post #13 in this thread. As you can build SW radio by 1 or by 11 transistors. Yes it can detect E Field, atmospheric charge (depend on antenna used) inclusive.

But right question is, does precious metals in soil expose detectable E. Field? Or even better: does precious metals on soil expose any detectable E. Field or detectable changing in atmospheric charge?

[Funfinder]

OK, thanx for the info, I will try to built something with PNPs.

This hi-amp BC547 circuit from your post#13 mainly detects all kind of electromagnetic radiation differences but I wonder if it's sensitive enough.


Your questions are absolutely legitime.
If the soil consists of relative dry sand like in deserts the electrostatic would "flow around" the metal so it should be detectable.

But most of the time it lies in earthy, mineralized etc. soil that "shortcuts" the buried metal as long as there has not build up some galvanic charge difference aka ionic interaction with the surrounding region.

And - more important, from what distance this is detectable if at all...

For shure the electrostatic field will induce something into the buried metal (similar like the eddy currents of usual MDs do) and this may charge it over a very long period so it gets a special electrostatic potential like a lightning rod can attract the flash.

But does this potential (we need to know what kind of potential it is exactly) has enough power for detection, especially for long range detection???

Building some ultra high sensitive multi radiation-detector is the one thing, but adjusting it another...

[Funfinder]

Long time no posts here - well I also was in holiday (emerald hunt in rila mountains ) but now we can continue our important LRL developments:

But first I have a question:

Someone here knows a simple but very effective modification of my circuit(s) so it is "swimming" inbetween the electrostatic field and will detect both "directions"?

But I would prefer to use the FET with this. It should detect the raise and fall of the electrostatic field out of an fixed and "silent zero-value".

I will try for finding a simple solution but if some here has a good idea it would save us precious time and you can proove how good are your electronic skills!

[Funfinder]

I found now the solution below.

It's more sensitive and it also recognises my hand from 10cm distance with little antenna.

Because of the capacitor it starts to "brt brt brt" - the faster, the more energy. This is not so good for listening to the original high voltage AC noises but the main purpose is to find both electrostatic charges.

Maybe I'll incorporate this circuit into the already existing one and then I'll have to find to attach the antennas or plates correct so it doesn't always detects me!

[mehdi]

hi funfinder
wonderful- i want to build the fet version but i am still suspense that can this shematic reality found gold underground? if it can so i am going to build it but if it not proper for find treasure underground please send me a good shematic and pcb of your best workable gold finder.( mehdi1m2m@yahoo.com )
regards
mehdi

[raff33]

hi funfinder
wonderful- i want to build the fet version but i am still suspense that can this shematic reality found gold underground? if it can so i am going to build it but if it not proper for find treasure underground please send me a good shematic and pcb of your best workable gold finder.( mehdi1m2m@yahoo.com )
regards
mehdi

Hi,
mehdi where are you from ? maybe help you............

[fenixdigger]

Hi Funfinder;

Any photos of the device?? Great info.

[mehdi]

hi raff33;
i am from iran
i am waiting for your help.....!
regards
mehdi

[raff33]

hi raff33;
i am from iran
i am waiting for your help.....!
regards
mehdi

Hi,
I send you a Private Messages

[mehdi]

hi raff33
thanks but he dont reply to me.
i built the fet version but the led light every time!!!!!
where is the problem(s)?
thank you
mehdi

[Morgan]

???

hi raff33
thanks but he dont reply to me.
i built the fet version but the led light every time!!!!!
where is the problem(s)?
thank you
mehdi

Maybe you need to try this LRL outside from your home,becouse is very sensitive to electromagnetic fields,lights,TV,Computer,etc etc ...