Announcement

Collapse
No announcement yet.

Gold Sample

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • aft_72005
    replied
    Originally posted by vali View Post
    helo aft
    hi vali

    Leave a comment:


  • vali
    replied
    Originally posted by J_Player View Post
    Hi Geo,

    I have also heard of soldering gold samples in sensors for Mineoro and other LRLs.
    I also read about other LRLs that are a dowsing rod that has a sample chamber with a small sample of gold inside (like Anderson rod).
    And there are other LRLs which are a dowsing rod with an empty sample chamber where you are instructed to put a sample of the material you want to find in the chamber (Dell rod).
    The sample can be gold or other materials.

    My thinking is there is nothing from a gold sample or other materials that can cause an electronic LRL to find gold.
    Anyone who understands electronics knows this is true.
    If gold put into the circuit helps you to find gold buried in the ground, then every computer which has gold plated contacts will also help you to find treasure.
    But it is not true.
    This is only a legend that LRL manufacturers made to become popular to believe for ignorant people who have no education of electronics.

    My thinking is Mineoro inventors were reading the advertising for other manufacturers of LRLs.
    When they read that people put gold samples in the chambers for their dowsing rods, then they think it is a good thing to solder a gold sample into their Mineoro LRL,
    Why?
    Because they know some people will open the Mineoro LRL and look to see what is inside.
    The think that when LRL hackers see the gold sample soldered, then they will believe the Mineoro is working by magic principle.

    But the problems is...
    Everybody who bought Mineoro found out it does not find treasure.
    So, when Mineoro inventors put gold sample inside, they prove it does not help to find treasure.

    Do you think this is another Mineoro trick to make people think they have a working LRL?
    Is it the same as the Mineoro tricks they use at the factory test grounds to detect plastic markers?


    Best wishes,
    J_P
    helo aft

    Leave a comment:


  • aft_72005
    replied
    Originally posted by Morgan View Post
    hello

    lets clarify something about MINEORO DC2008, first of all,this is one of Alonso&Damasio LRL,and i already found a few objects ONLY with DC2008 model,was small coin size objects and this device ONLY MAKE RAMDOMLY SOUNDS NEAR THE BURIED OBJECTS 2m-4m ,NOTHING COMPARE TO WHAT I SAW IN MINEORO FIELD TEST WITH CLEAR SIGNALS,and able to pinpoint.
    My conclusion is MINEORO can detect the PHENOMENON if target is BIG,and not all the mineoro models. I have notice ,one old PDC210 found some silvercoins 20m distant in a forest but never be able to find single coin or object.
    I also know the mineoro cant find all Gold and Silver alloys,this means we can walk near treasure and if metal alloy not match with mineoro frequency WE LOSE THE TARGET.
    So,thats it...

    Regards

    Thank you. Interesting data. Only some models working!!!!!!!
    Best regards.

    Leave a comment:


  • Morgan
    replied
    DC2008

    Originally posted by aft_72005 View Post
    Magnetic filed detection is good but this is strange , why didn’t detect phenomenon ?

    hello

    lets clarify something about MINEORO DC2008, first of all,this is one of Alonso&Damasio LRL,and i already found a few objects ONLY with DC2008 model,was small coin size objects and this device ONLY MAKE RAMDOMLY SOUNDS NEAR THE BURIED OBJECTS 2m-4m ,NOTHING COMPARE TO WHAT I SAW IN MINEORO FIELD TEST WITH CLEAR SIGNALS,and able to pinpoint.
    My conclusion is MINEORO can detect the PHENOMENON if target is BIG,and not all the mineoro models. I have notice ,one old PDC210 found some silvercoins 20m distant in a forest but never be able to find single coin or object.
    I also know the mineoro cant find all Gold and Silver alloys,this means we can walk near treasure and if metal alloy not match with mineoro frequency WE LOSE THE TARGET.
    So,thats it...

    Regards

    Leave a comment:


  • aft_72005
    replied
    Originally posted by Morgan View Post
    DC2008, catch the 1,5V sparks 1m distance
    Magnetic filed detection is good but this is strange , why didn’t detect phenomenon ?

    Leave a comment:


  • aft_72005
    replied
    Originally posted by Morgan View Post
    All mineoro models PDC,DC and FG detects the 1,5V spark 80cm or 1m

    The DCH85,not detect the sparks,maybe becouse work 6-36Hz

    About the PD,i dont know if there is a SAMPLE inside the Ferrite,i´m afraid to open and damage something.

    Thank you Morgan

    Leave a comment:


  • aft_72005
    replied
    Originally posted by Geo View Post
    Hi Aft.
    Don't crash your head
    This time i am very busy so i have not time for answers. I only read the forum for 5 minutes and this is all. I hope to have more time after 2 weeks.
    Regards
    Hi Geo
    As I am Baled head, muse be care.

    Leave a comment:


  • Geo
    replied
    Originally posted by J_Player View Post
    Maybe it is very difficult to connect a 15 cm wire to 1.5 volt battery without special laboratory...

    Best wishes,
    J_P
    Hi J_P.
    Maybe you don't need a special lab for this test but i am sure that you need a Mineoro device, and i don't own anyone....

    Regards

    Leave a comment:


  • Geo
    replied
    Originally posted by aft_72005 View Post
    Hi J_Player
    Also I think in difference model , detection will be difference .
    I asked for FG79 from Geo in other thread , without reply .!!
    Best regards.
    Hi Aft.
    Don't crash your head
    This time i am very busy so i have not time for answers. I only read the forum for 5 minutes and this is all. I hope to have more time after 2 weeks.
    Regards

    Leave a comment:


  • Morgan
    replied
    MINEORO

    Originally posted by J_Player View Post
    I am also interested to know about detecting a spark with a i5 cm wire from 1.5 volt battery short ... when wire is the same size as big coil in Mineoro.
    I think the detection will be different with different models of Mineoro... because the circuits are different in different models.

    I also would like to know if the Alonso PD has a gold sample inside.

    Best wishes,
    J_P
    All mineoro models PDC,DC and FG detects the 1,5V spark 80cm or 1m

    The DCH85,not detect the sparks,maybe becouse work 6-36Hz

    About the PD,i dont know if there is a SAMPLE inside the Ferrite,i´m afraid to open and damage something.

    Leave a comment:


  • Morgan
    replied
    DC2008

    Originally posted by aft_72005 View Post
    """""I having question about MINEORO .with wire long 15 cm , do short circuit 1.5 volt Battery for several times consecutive , what is detection range?

    Best regards."""""


    Hi Morgan
    Ok, but forget reply to this question
    Best regards.
    DC2008, catch the 1,5V sparks 1m distance

    Leave a comment:


  • J_Player
    replied
    Originally posted by aft_72005
    Hi J_Player
    Also I think in difference model , detection will be difference .
    I asked for FG79 from Geo in other thread , without reply .!!
    Best regards.
    Maybe it is very difficult to connect a 15 cm wire to 1.5 volt battery without special laboratory...

    Best wishes,
    J_P

    Leave a comment:


  • aft_72005
    replied
    Originally posted by J_Player View Post
    I am also interested to know about detecting a spark with a i5 cm wire from 1.5 volt battery short ... so wire is the same size as big coil in Mineoro. I think the detection will be different with different models of Mineoro... because the circuits are different in different models.

    I also would like to know if the Alonso PD was delivered with a gold sample inside.

    Best wishes,
    J_P

    Hi J_Player
    Also I think in difference model , detection will be difference .
    I asked for FG79 from Geo in other thread , without reply .!!
    Best regards.

    Leave a comment:


  • aft_72005
    replied
    Originally posted by Morgan View Post
    Thats true,but it happens by chance,this mineoro can beep with the medalion ONLY TWO TIMES IN ONE MONTH.And the detection not stay long,only a few seconds and vanish.
    Yes , I agree , I did this experience

    Leave a comment:


  • J_Player
    replied
    Originally posted by aft_72005
    """""I having question about MINEORO .with wire long 15 cm , do short circuit 1.5 volt Battery for several times consecutive , what is detection range?

    Best regards."""""


    Hi Morgan
    Ok, but forget reply to this question
    Best regards.
    I am also interested to know about detecting a spark with a i5 cm wire from 1.5 volt battery short ... when wire is the same size as big coil in Mineoro.
    I think the detection will be different with different models of Mineoro... because the circuits are different in different models.

    I also would like to know if the Alonso PD has a gold sample inside.

    Best wishes,
    J_P

    Leave a comment:

Working...
X