frquncy

[J_Player]

Hello dear Player, J ...
you are so smart ! It IS a star...Like you! A nuclear reactor!
Fred didn´t like gold, and said rings made interferences when tuning his LRL´s...In fact we have no gold at all in the house because of interference, he found plenty of gold everywhere but never bring it at home for this reason, he preferred to let it into the ground where he knows his LRL will find it ...
So it must be another hands that you have seen with gold rings ??!! ...

Maybe I a saw ring on the hand from wife of Dr. hung?

Best wishes,
J_P

[Fred]

Maybe I a saw ring on the hand from wife of Dr. hung?

Best wishes,
J_P

That would explain why his lrl´s beeps a lot and mine don´t ....

[MFC]

Hello Mesy64 I am Maikel from Cuba, I had saw your ask about a table for Frequencies for VLF metal detectors, well this can vary a lot.

Example VLF detectors are aprox 6 -- 8 KHZ (Very low frequency VLF), these detectors are basically a trasmit and a receiver circuit with ability to ground balance and discimination.

The Pulse Induction metal detectors (PI) are working more low freq *** from 100 HZ to 1000 HZ (1KHZ), they are better in ground because lo lower frequencies penetrate more deep in ground.

Actually don't exist a table with these datas because between one and other menufacturer this can vary.

**Important, the response of gold and silver to determinate frequency is not exact, because somebodies say that a hight frequency is better for gold and silver that a lower frequency, I think this is not certainly true because the PI detectors work in more low frequencies that the VLF and however the PI detect the gold more Deep than a VLF machine. If you see carefully you will see the VLF is more hight freq than a PI. So you may be say why?

Well the PI detector have an specific feature that a VLF don't have and is the heavy Magnetic Field emmited trought the search coil, is a brutal power of emit voltage wave compared with a more poor emition of a VLF detector. This hit the gold or silver object with more energy and more Deep and generates too a stronger Eddy Current more easy to detect for the electronic of the PI machine.

If you want to have a Good PI machine you must get a short delay timefor receiving, a hight Q factor and low capacitance coil as possible, Good receiver calibration and sensibity and work between 100 HZ and 1000 HZ depending of the mineralization of the soil. I believe that Deepers 8AT is perfect PI machine and easy to make.

good look

Maikel

[Fred]

Hi MFC,
This is the remote sensing forum, and here in this special and somewhat magical world, when someone asks for a metal frequency is because they believe underground metals transmits on their own a signature signal on a (magical) frequency that you just have to receive to know where is buried the metal.
I think everything can happen in the Rs forum.I guess this is why i am here too...

[Qiaozhi]

Hi MFC,
This is the remote sensing forum, and here in this special and somewhat magical world, when someone asks for a metal frequency is because they believe underground metals transmits on their own a signature signal on a (magical) frequency that you just have to receive to know where is buried the metal.
I think everything can happen in the Rs forum.I guess this is why i am here too...

I see you've recovered from the gold-frequency experiment.

Did you have any revelations during your near-death experience, such as a vision of a complete working LRL schematic?

[Fred]

I see you've recovered from the gold-frequency experiment.

Sure , mouth to mouth reanimation and here i am.

Did you have any revelations during your near-death experience, such as a vision of a complete working LRL schematic?

All LRL´s are working Qiaozhi, this is a pleonasm
I did have revelations and your gold-frequency experiment was really useful: the right schematic doesn´t seem to belong to the world of simple mortals.
I´m thinking about selling the schematic (blurry as i only was able to see it for a short time) for 19999,99 £ (just for you), you will have already noticed that for such rare near-heaven schematics is is quite a bargain.Of course some components are concealed in black empty-filled cylinders, so difficult to copy...
If you are interested just let me know and i will register under a new name.

regards,
Fred.

[Qiaozhi]

I´m thinking about selling the schematic (blurry as i only was able to see it for a short time) for 19999,99 £ (just for you), you will have already noticed that for such rare near-heaven schematics is is quite a bargain.

That is too expensive for a blurry schematic with some parts hidden by epoxy.
I hope you're not turning into a money grabbing scammer.

Did you do the experiment with 60Hz mains voltage? I've heard that 50Hz can give better results. Maybe you would like to try again?

[mesy64]

Dear friends, you are a recipient of vlf waves emitted by the gold received in space ?
What is the frequency of radio waves received??
please help me

[J_Player]

Sure , mouth to mouth reanimation and here i am.



All LRL´s are working Qiaozhi, this is a pleonasm
I did have revelations and your gold-frequency experiment was really useful: the right schematic doesn´t seem to belong to the world of simple mortals.
I´m thinking about selling the schematic (blurry as i only was able to see it for a short time) for 19999,99 £ (just for you), you will have already noticed that for such rare near-heaven schematics is is quite a bargain.Of course some components are concealed in black empty-filled cylinders, so difficult to copy...
If you are interested just let me know and i will register under a new name.

regards,
Fred.


Originally posted by Qiaozhi
That is too expensive for a blurry schematic with some parts hidden by epoxy.
I hope you're not turning into a money grabbing scammer.

Did you do the experiment with 60Hz mains voltage? I've heard that 50Hz can give better results. Maybe you would like to try again?



Originally posted by mesy64
What is the frequency of radio waves received??

Everybody knows the frequency doesn't matter with a broadband noise locator.
It is the voltage that makes the difference.

The 110v light sockets in the USA and Australia make it difficult to reach a higher state of consciousness to achieve the revelations of LRL.
Reports of both 50 Hz and 60Hz electrocutions from around the world prove nobody discovered the secret LRL revelations at 110v.
It becomes apparent that Fred inadvertently noticed a star in his 220v light socket, along with other things that are found in distant galaxies.
When he reached into this 220v socket he was readily launched past nirvana, most likely through a worm hole to deep space of revelations.

These revelations are certainly worth 19999,99 £.
But since we have discovered the frequency is not important, the remaining revelation is easy to determine by examining the LRLs that have been reverse engineered.
Have you ever wondered why epoxies were poured into empty cavities?

The epoxy is the secret !!!
There you have it.
Of course, there are millions of epoxy formulas, and only a very few will work to locate treasures at long distance.
The secret epoxy has an extract of the substance which gold DNA produces to fight oxidation.
Your broadband receiver will locate only when the exact balance of this substance is mixed in the epoxy.
But, the most important question...
Where can you find this long range epoxy?
The answer is also specified in the 220v revelations.

But the answers don't come cheap.
19999,99 £ is a small price to pay for the secret "dead socket scrolls"
A sample of what you get for your 19999,99 £:



... and there's a lot more where that came from....


Best wishes,
J_P

[Qiaozhi]

The 110v light sockets in the USA and Australia make it difficult to reach a higher state of consciousness to achieve the revelations of LRL.

I think you meant to say unconsciousness.
If no success can be found with 240V, we could always try a 3-phase supply.

However, joking aside ... I don't think mesy64 is understanding this sarcasm. So we should make it clear that we do not believe there are any frequencies that would be useful for his purposes. The whole idea is complete nonsense, and is based on false pseudo-science, whether it is 50kHz, 50Hz, 123456Hz (or who cares), as all of these will give the same effect ... nothing.

[J_Player]

I think you meant to say unconsciousness.
If no success can be found with 240V, we could always try a 3-phase supply.

However, joking aside ... I don't think mesy64 is understanding this sarcasm. So we should make it clear that we do not believe there are any frequencies that would be useful for his purposes. The whole idea is complete nonsense, and is based on false pseudo-science, whether it is 50kHz, 50Hz, 123456Hz (or who cares), as all of these will give the same effect ... nothing.

Exactly correct...
Of course, you must be careful to make the correct choice... delta or star?
It is more tricky than Alice in wonderland choosing which door.
But we got a hint from Fred's post which was confirmed by his wife...

Seriously there is no treasure frequency.
If a way to locate gold at long distance was explained in detail in this forum, It would not have any thing to do with a frequency.
I know because it has already been done.


Best wishes,
J_P

[1966]

hi to all
I need a metal frequency table?
I need gold and silver metals frequencies that are emitted from the Earth??
These frequencies are of the type vlf?
please help me?

gold-5.0-5.6 kHz silver-8.7-8.9 kHz copper-11.7 kHz bronze-11.3 kHz iron-17.0-17.8 kHz lead-4.5 kHz aluminum-7.0 kHz

[wam]

The "GOLD FREQUENCY" reviled

OK, there is some think like gold frequency and LRL recognized by science but it is far away from what LRL enthusiasts or OKM or other fantasy, hobby or businesses do. (Just keep doing It for fun and all will be OK, I support You).
Now top secret The "GOLD FREQUENCY" is about 138.34 THz ( wave 2.167 um).
Ref. http://www.ga.gov.au/image_cache/GA12286.pdf
Never give up.
Regards,

[J_Player]

OK, there is some think like gold frequency and LRL recognized by science but it is far away from what LRL enthusiasts or OKM or other fantasy, hobby or businesses do. (Just keep doing It for fun and all will be OK, I support You).
Now top secret The "GOLD FREQUENCY" is about 138.34 THz ( wave 2.167 um).
Ref. http://www.ga.gov.au/image_cache/GA12286.pdf
Never give up.
Regards,

cool...
I almost detected it long range, but I can't quite see that color.
I only see the yellow and red stuff -- too hard to see from long distance.
Maybe with my special filtered NIR LRL camera....
Thanks for the tip.

Best wishes,
J_P

[wam]

Hi, I propose to use above location to test any alternative LRLs. (and classic MD as well).
Regards,