A theory-Please comment

[Geo]

As I understand, you are asking for this circuit? (in this case hands have to be well isolated from brass rods):

With this schematic you try to take the signal from lrods and to turn on the PLL. I tried it before years without results.

[WM6]

njegov krog, kako pomagati medeninaste palice za metal?
Sprejem palica je iz medenine z več vezij?

Dear jack,

your Slovenian is great, but questions in whole has no sense, so I cannot give you an answer.

What is your native language, cay you put here your question in your native language?
Maybe this will help. Or even better: draw your idea and we will comment.

With this schematic you try to take the signal from lrods and to turn on the PLL. I tried it before years without results.

Agree Geo, but, as you can see, jack insist on those construction so we can try to help him. It is better for him to build this than buy something shamelessly overpriced from Mineoro or others similar scam companies.

[WM6]

Electronic dovsing rods

Here complete schematic with PCB (PCB 3.5x3.5", Corrections: for D1 use 1N4148 and for C1 22pF) :

[WM6]

List of material:

[Geo]

Dear jack,

your Slovenian is great, but questions in whole has no sense, so I cannot give you an answer.

What is your native language, cay you put here your question in your native language?
Maybe this will help. Or even better: draw your idea and we will comment.



Agree Geo, but, as you can see, jack insist on those construction so we can try to help him. It is better for him to build this than buy something shamelessly overpriced from Mineoro or others similar scam companies.

From what i saw at photo attached from Jack, he need something to make the lrods more sensitive, or to make him more sensitive. You can draw with your 3D program a battery 9v with a resistor in series with one Lrod. The other Lrod is connected with the other pole of battery. There are people who says that they have high increase at their sensitivity when they work with Lrods.

[Tim Williams]

I allways thougt no need a second circuit to oprerate the Rods in Karl´s MFD...

Morgan I noticed you have Au and Ag backwards.

Au 5K
Ag 8.7K

So they say....

[Morgan]

Morgan I noticed you have Au and Ag backwards.

Au 5K
Ag 8.7K

So they say....

yes,this was one of my first LRL projects,maybe 6 years ago,i made it according Karl instructions in Geotech forum.But dowsing is not my favorite hobby...anyway i saw people with skill ability with rods.

[jack]

Here complete schematic with PCB (PCB 3.5x3.5", Corrections: for D1 use 1N4148 and for C1 22pF) :

tank you very very much dear wm6
Please explain the workings of the circuit for me?
How to help brass rods?
What makes a beep?
whith respect
jack

[Sneshko]

Dear WM6!
You are very generous.
On behalf of all LRL fanatics,
Thanks for this electronic dowsin rods!
Regards!
Sneshko

[WM6]

hi jack

I think it is better for you to buy one completed device, like this from Morgan:

http://www.longrangelocators.com/forums/showpost.php?p=140676&postcount=7

It is cheap in build with soul, which is by dowsing devices most important, namely, that it was build with soul and positive intention, not like mineoros and other scam devices which was build mechanically and with negative fraud intentions.

[Geo]

Morgan I noticed you have Au and Ag backwards.

Au 5K
Ag 8.7K

So they say....

At my new dowsing rod i use 34Hz for Au, 60... 62 Hz for Al and 4.5 hz for Cu.
I will try to give photos and schematic at a new thread.

[WM6]

You are very generous.
On behalf of all LRL fanatics,
Thanks for this electronic dowsin rods!

You are welcome Sneshko.

Here suggested realisation design:

[jack]

hi
Attachment is in the format sprint layout
dear wm6 There is a brass rod with a wire connected to the circuit?
The circuit is located away from the bars? Similar images

[WM6]

hi
Attachment is in the format sprint layout
dear wm6 There is a brass rod with a wire connected to the circuit?
The circuit is located away from the bars? Similar images

Sorry, I use linux and cannot read your Sprint layout file.

[Qiaozhi]

Sorry, I use linux and cannot read your Sprint layout file.

Go to http://www.abacom-online.de/uk/html/sprint-layout.html
Scroll to bottom of page.
Download "The Sprint-Layout Viewer"
View properties of viewlayout50.exe and tick the "Allow executing file as program" box, or use "su chmod 777 viewlayout50.exe" on the command line.
Start viewlayout50.exe and open the .LAY file.
File can be viewed in Ubuntu Linux, no problem.

Note - you must have WINE installed for this to work.