A theory-Please comment

[Geo]

Geo,

Regarding the PLL circuit, their is one that has the input going to one hand and the other input going to the other hand(with brass dowsing rods in each hand). I don't know if that is the circuit you built with no results but the one I describe here works on the basis of detecting changes in the brains waves in response to locating said target-not using the 567 to detect any VLF waves just so you know.

I remember buying that PLL schematic off some site that sells plans and I recognized how it worked once I thought about it. In that case it could possibly work (detecting the change in brain waves-alpha versus beta,etc.).

All speculation though,


Randy Seden

God's Country,California

I found it at Geotech.
Enjoy
http://www.geotech1.com/forums/showpost.php?p=41314&postcount=1

[WM6]

Hi WM6
Can you post your Livewire file for this shematic?
Also, does it work for you?
Are the generator stable?
Thanks a lot and best regards my friend
Nelson

Hi Nelson

Posting on Livewire will be of little use if you cannot read .CWZ format which I have in origin.
This was reason that I conwert all in .JPG format to make it available to all.

Circuit works as electronic dowsing rod without problem and as good as any other expensive electronic dowsing rod. I did not test it in field because I am not a dowser and cannot find nothing with dowsing rods ever. If you are born dowser maybe it can work for you, otherwise left it in peace and make something like GG AL718 which is at least theorethical step in LRL direction.

Generator shematic is jack's idea not my, I only add antenna solution. I think it can work stable enough for this purposses.

[Geo]

Hi Geo.
This is another device i will like to try, so if you can share us a good and woking schematic, will be amazing.
Did your got some theasures with this device?
Regards
Nelson

Hi.
I think to put here the full project.
Maybe next week.
But I have a dilemma, to put this project or to put the schematic of Cryfton???
Next week I will know. It will be a gift for the new year.

Regards

[WM6]

Hi.
I think to put here the full project.
Maybe next week.
But I have a dilemma, to put this project or to put the schematic of Cryfton???
Next week I will know. It will be a gift for the new year.

Regards

Bravo Geo!
Right decision.
Why not both?

[J_Player]

Hi.
I think to put here the full project.
Maybe next week.
But I have a dilemma, to put this project or to put the schematic of Cryfton???
Next week I will know. It will be a gift for the new year.

Regards

Hi Geo,
I think the full schematic is already shown in the Geotech forum.
You can see it here: http://www.geotech1.com/forums/showt...314&#post41314

Scroll up and down the page to see the schematic and photos of the construction.
Also I am wondering why Geotech keeps dowsing schematics in the Geotech forum when they want all dowsing and LRL to be in this forum?


Best wishes,
J_P

[J_Player]

Gold here is 34.98hz Silver 107 is 81.0 and 109 is 94.17hz. Yes these frequencies are good. I still use ring theory to verify.
I think they are using harmonics of these frequencies. The differences between 8.7k and 8.1k may be the difference in location.

If I use the next step up for gold 69.96hz is very close to what I measure using ring theory 70.06hz. So for gold here my body responds the best on the first harmonic for gold.

Hi Tim,
I believe you are correct.
The field values I have are only averages for the area.
They do not take into account the large variations that can be seen within any general location.
If you actually took magnetometer measurements, then you will be able to calculate the correct NMR frequency.
I recently found some more NMR information that seems very interesting, which I will post in the MFD frequency thread.
There is a lot to know, and some may help treasure hunters if they are able to use some little known facts.

Best wishes,
J_P

[Geo]

Bravo Geo!
Right decision.
Why not both?

Because it is a good idea to let one for the 2013
Or not...

We will see. But i would want and Max and Fred here so all together to analyze the schematic.......

[Geo]

Hi Geo,
I think the full schematic is already shown in the Geotech forum.
You can see it here: http://www.geotech1.com/forums/showt...314&#post41314

Scroll up and down the page to see the schematic and photos of the construction.
Also I am wondering why Geotech keeps dowsing schematics in the Geotech forum when they want all dowsing and LRL to be in this forum?


Best wishes,
J_P

Hi J_P.
I don't speak for this schematic.
This schematic is at Tech forum, this is the reason that there is not here

Regards

[Morgan]

Hi.
I think to put here the full project.
Maybe next week.
But I have a dilemma, to put this project or to put the schematic of Cryfton???
Next week I will know. It will be a gift for the new year.

Regards

Maybe i can give to this forum the DC2008,not schematic but all photos from both sides of PCB. That is becouse it needs repairment(one battery wire is broken from inside) and is already out of waranty.

[J_Player]

Maybe i can give to this forum the DC2008,not schematic but all photos from both sides of PCB. That is becouse it needs repairment(one battery wire is broken from inside) and is already out of waranty.

Hi Morgan,
It will be good to post your photos of DC2008.
There is no problem because you are the copyright owner of all photos that you make from your own camera.
Maybe it will be good to start a new thread with the title DC2008 so people will be able to find it when they look for DC2008 information.


Thank you for your help
Best wishes,
J_P

[Fred]

Because it is a good idea to let one for the 2013
Or not...

We will see. But i would want and Max and Fred here so all together to analyze the schematic.......

Hi !
I am back.... I could not read all new posts, but if there is something new in the LRL world, please let me know (end of sarcasm)

Best regards to all, and don´t lose your sense of humour, all those threads looks so serious

[mrmr16]

Hi WM6

i saw your schematic in 18 post .

do you updated this schematic .if you did it , please put here ?

what frequency of this circuit ?

best regards

[mc_307]

Here complete schematic with PCB (PCB 3.5x3.5", Corrections: for D1 use 1N4148 and for C1 22pF) :

hi friends,
I did this circuit. but somehow I can not make the adjustment. best operating frequency is how many?
Produces up to 500-odd kHz frequency. but which one is best?
and how to use?

I'm sorry I do not know English, I use google translate.

[mc_307]

I also use cd4093 integrated and running

[WM6]

Hi WM6

i saw your schematic in 18 post .

do you updated this schematic .if you did it , please put here ?

what frequency of this circuit ?

best regards

No need to update, cause classical wooden dowsing rod works the same way.