Announcement

Collapse
No announcement yet.

Lrl from Italy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hi HOBBIT
    Tune P1 for about 3Mhz, tune P2 for about 1-6V (AC signal) at point X and at pin2 (phase comparator output) a DC signal 0.5-6V. This is not a metal detector and hand tests serve little. As I said and I repeat here there is no other way to test the lrls, you must have a long buried metal that is in same place at least a few months (for my experience) or to know a place where there is surely a long buried metal. An empirical system is exploiting the compass effect, you need to adjust the gain towards the maximum sensitivity until you have the compass effect then you have to lower the gain until it disappears. This happens with my lrl.
    Best Regards

    Comment


    • Originally posted by HOBBIT View Post
      hi to all

      construct lrl Franco and I but do not know how to adjust to being very sensitive, putting his hand on the horn grabbed by 2-3 cm, is correct that this distance must be more sensitive;
      Thank you all.
      Hi
      you must have old buried gold or silver in your field test

      Comment


      • Originally posted by HOBBIT View Post
        hi to all

        construct lrl Franco and I but do not know how to adjust to being very sensitive, putting his hand on the horn grabbed by 2-3 cm, is correct that this distance must be more sensitive;
        Thank you all.
        test in buried metal my friend not for fresh metal
        God bless all - Nicolas

        << My channel >> << My shop >>

        Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

        Comment


        • my lrl

          hi
          franco I built your lrl
          Please guide for getting started.(my frq is 2.8mhz*pot2 set on 6vp-p* led on -off with pot 3)

          Please guide?
          best wish
          Attached Files
          Knowledge is the greatest wealth

          Comment


          • Hi mustefa ubram

            I repeat here what I said to Hobbit, "you must have a long buried metal that is in same place at least a few months (for my experience) or to know a place where there is surely a long buried metal. An empirical system is exploiting the compass effect, you need to adjust the gain towards the maximum sensitivity until you have the compass effect then you have to lower the gain until it disappears. This happens with my lrl."

            Best Regards

            Comment


            • Hi Mustefa Nice work
              We waiting you test now. and your news.

              Good luck
              God bless all - Nicolas

              << My channel >> << My shop >>

              Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

              Comment


              • tank you franco and nicolas
                the lrl Reacts to mobile phone radiation.In your opinion, is this acceptable?
                Knowledge is the greatest wealth

                Comment


                • Hi mustefa ubram
                  I don't know if it's important, I have no tried, but I think that the Lrl is ok.
                  Best Regards

                  Comment


                  • franco What are the duties L1 C10 C11 ?
                    is this circuit postive detector?
                    Knowledge is the greatest wealth

                    Comment


                    • Hi mustefa ubram
                      I can only say that the phenomenon changes amplitude and phase of the amplifier stage.
                      Best Regards

                      Comment


                      • hello da italy

                        Originally posted by mustefa ubram View Post
                        NEW VERSION PCB OF LRL FRANCO 6CM*5CM
                        mustefa hello, I want to ask you a favor, since you've already made ​​the PCB francoitaly I could put the photo in black and white of the printed circuit? I am from Italy as frank I have already contacted him directly, but he told me that he just makes patterns pen and I do not understand nulla.tank

                        Comment


                        • Dear friend

                          Has i know all LRL divices detects electromagnetics signals from many sources.
                          Yesterday for example i was experimenting to know what PDK and Crypton OBMD 2 can detect. So for that i try to see if this devices can detect a quarz watch, and yes both detected this small signal. Al so a 1.5 battery, a small tv set are detected. So far i think that the clue is to try the answer from Franco and this is to test the detector on a site where you know there is silver or gold buried from long time (years)

                          Regards

                          Nelson


                          Originally posted by mustefa ubram View Post
                          tank you franco and nicolas
                          the lrl Reacts to mobile phone radiation.In your opinion, is this acceptable?

                          Comment


                          • mustefa

                            Originally posted by nelson View Post
                            Dear friend

                            Has i know all LRL divices detects electromagnetics signals from many sources.
                            Yesterday for example i was experimenting to know what PDK and Crypton OBMD 2 can detect. So for that i try to see if this devices can detect a quarz watch, and yes both detected this small signal. Al so a 1.5 battery, a small tv set are detected. So far i think that the clue is to try the answer from Franco and this is to test the detector on a site where you know there is silver or gold buried from long time (years)

                            Regards

                            Nelson
                            Yes, ok, but I asked for a copy of the electronic board in black and white to be able to do francoitaly and since mustefa already made ​​it like I asked ... mustefa all here to test it then I got it.

                            Comment


                            • my lrl is ready.But I have not an old metal buried for testingDo not Know
                              Attached Files
                              Knowledge is the greatest wealth

                              Comment


                              • Originally posted by mustefa ubram View Post
                                my lrl is ready.But I have not an old metal buried for testingDo not Know

                                Hi Mustefa nice sensor Antenas
                                God bless all - Nicolas

                                << My channel >> << My shop >>

                                Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding

                                Comment

                                Working...
                                X