Lrl from Italy

[ouiarabe]

hi Franco
and of course all other
after some tests I found that the antenna stylus connected to the base of TR2 makes it sensitive mounting static electrical charge as the neon lights of the high voltage pouteaux and of course the hit in the hand, the assembly becomes like a Zahori
I will attach a video
the antenna left is the original and which is in the right that is connected to the base of TR2

[ouiarabe]

Hi all
here is the video

https://www.youtube.com/watch?v=F1utYoRBidI

https://youtu.be/F1utYoRBidI

[FrancoItaly]

The test with the hand only indicates that the amplification is sufficient and that the installation is correct, but does not provide evidence that the LRL is working, for example, if L1 is composed of 5 turns the test with the hand is positive but does not work as LRL. The phenomenon is difficult to capture and probably will change depending on your location.

[brs]

why
5 turns not good

[abdou2014]

You had different results for the two antenna. what is their location, I think : L1 base of TR2 and L2 emitter of TR1 ?

[ouiarabe]

The test with the hand only indicates that the amplification is sufficient and that the installation is correct, but does not provide evidence that the LRL is working, for example, if L1 is composed of 5 turns the test with the hand is positive but does not work as LRL. The phenomenon is difficult to capture and probably will change depending on your location.

maybe you did not understand me
I mean by this video as left antenna detects the negative charges and the right detects the positive charges

[abdou2014]

You had different results for the two antenna. what is their location, I think : L1 base of TR2 and L2 emitter of TR1 ?

[FrancoItaly]

I did not do any experiment with other coil (L2) and the stylus antenna is directly connected to L1, also I do not think it's positive and negative ions, as the impedance of the input LRL is very low, what affects touching the antenna is the capacitance of the human body.

[brs]

hi franco
The impact of the compass and the sky that appear when there is a lot of padding
I want to explain to me more afraid that I have a lot of padding and whether the piece affects the operation of the device

[FrancoItaly]

I don't know what you mean for "padding".

[brs]

Amplification
sorry for my bad used a translator

[FrancoItaly]

You must decrease the amplification until the compass and the sky effect disappears.

[brs]

Amplification of capacitor or resistance

[FrancoItaly]

If you have the 3 leds version turn P1 for less sensibility, if you have 1 led version turn P2, I think that it's not necessary hardware change.

Best Regards

[brs]

thank you franco