Announcement

Collapse
No announcement yet.

Zahori

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by Fred View Post
    If the antenna freely rotates i am sure it works pretty good for real ghosts.
    I was just assuming that it would be as good at detecting gold at long distances as it would be at detecting ghosts. If you get my meaning ...

    Comment


    • Originally posted by Qiaozhi View Post
      I was just assuming that it would be as good at detecting gold at long distances as it would be at detecting ghosts. If you get my meaning ...
      Do you mean that if ghosts are arround then the detector goes silent and if treasure is arround then you get beeps.
      Does this mean that there are ghosts everywhere?

      Comment


      • Originally posted by Qiaozhi View Post
        I was just assuming that it would be as good at detecting gold at long distances as it would be at detecting ghosts. If you get my meaning ...
        Yes ! I agree that it should work as well.Only that the suggested modifications may be necessary as ghosts are known to be mobile entities.

        Comment


        • Originally posted by Fred
          Yes ! I agree that it should work as well.Only that the suggested modifications may be necessary as ghosts are known to be mobile entities.
          I hear there has been much confusion from using the Zahori to detect ghosts.
          We know that common household ghosts are detected at the same frequency as silver from a Zahori that has a coil wound around a silver sample.
          And the ghost eradication companies pay thousands of dollars to buy their hand-built silver detecting Zahoris so they can find the ghosts at the same silver frequency.
          This is why people who call a ghost eradication service to remove ghosts from their home expect to pay a sizable fee to make their home safe and ghost-free.

          But the problem comes because ghosts use the same frequency as silver. Everything works fine until they detect a lot of silver things in the house.
          So they remove the silverware, silver jewelry, and all persons with silver fillings in their teeth from the house. They remove everything silver from the house except for the mirrors which have a silver reflective backing. Since these mirrors are often heirlooms that are too large to remove, they leave them in the haunted house while hunting for ghosts.
          But then comes the problem...

          We know ghosts have no reflection in a mirror.
          So when these Zahoris beep at the mirror, the ghost hunter does not know if it is beeping at the silver on the mirror, or if it is beeping at a ghost...

          After days of failing to catch the ghosts, the owner of the house kicks out the ghost hunters and does not pay them.
          They point and laugh at the ghost hunters.
          No matter what the ghost hunters say to convince them that they can find ghosts, the owners will not believe them.
          And the ghosts laugh at the ghost hunters too.
          They think it is funny how they can play games to hide from the ghost hunters because they are invisible through a mirror.

          So the ghost hunters go home and try to sue the people who hired them so they can get paid...
          but they cannot prove they are able to recover any ghosts. When the court asks to see a single one of the many ghosts they caught, they cannot show any.
          I guess these ghost hunters are becoming poor like some LRL manufacturers.

          Best wishes,
          J_P

          Comment


          • Originally posted by J_Player View Post
            So the ghost hunters go home and try to sue the people who hired them so they can get paid...
            but they cannot prove they are able to recover any ghosts. When the court asks to see a single one of the many ghosts they caught, they cannot show any.
            I guess these ghost hunters are becoming poor like some LRL manufacturers.

            Best wishes,
            J_P
            .... very good

            Regards
            Geo

            Comment


            • Hi Morgan.
              Has you request, here is my sketch from my zahori antenna.
              If you found something wrong, please let me know.
              Regards and many thanks
              Nelson


              Originally posted by Morgan View Post
              please,make one draw with your ANTENNA configuration,like this i can correct the error.
              Attached Files

              Comment


              • Hi nelson
                when L1 is 80mm and L2 is 120mm , so L1 to L2 distance should be 20mm! but i know what is your intention, L2 is 6mm below the L1. true?
                regards
                mehdi

                Comment


                • Hi Mehdi.
                  Yes the distance from L1 to L2 is 6 mm.
                  Also i discover that i join and solder both loop ends of L1 and this join also to solder to the wire that runs to the gold sample and then to G of 2N3819. So now i separate both loop ends and sensitivity seems to work fine.
                  Something strange happends too, when i touch witn my finger the wire that comes fom G of 2N3819, cause sensitivity incres and you can detect my home lamp switch from about 60 to 70 centĆ­meters very easy. So for shure my problem is with antenna.
                  Do you have any other idea about it?
                  Di you build your own zahoria and what are your expirencies?
                  Regards
                  Nelson
                  PD: see my sketch id is rigth

                  Originally posted by mehdi View Post
                  Hi nelson
                  when L1 is 80mm and L2 is 120mm , so L1 to L2 distance should be 20mm! but i know what is your intention, L2 is 6mm below the L1. true?
                  regards
                  mehdi
                  Attached Files

                  Comment


                  • zahori

                    Originally posted by nelson View Post
                    Hi Mehdi.
                    Yes the distance from L1 to L2 is 6 mm.
                    Also i discover that i join and solder both loop ends of L1 and this join also to solder to the wire that runs to the gold sample and then to G of 2N3819. So now i separate both loop ends and sensitivity seems to work fine.
                    Something strange happends too, when i touch witn my finger the wire that comes fom G of 2N3819, cause sensitivity incres and you can detect my home lamp switch from about 60 to 70 centĆ­meters very easy. So for shure my problem is with antenna.
                    Do you have any other idea about it?
                    Di you build your own zahoria and what are your expirencies?
                    Regards
                    Nelson
                    PD: see my sketch id is rigth
                    Everything looks normal except the wire around the sample is big,but maybe it works,i think yes,becouse the energy around the gold sample will make it to resonate. The same arrangement you can see inside the head of the Esteban“s Blue PD,in this case the gold sample stay inside the tube.

                    Click image for larger version

Name:	head2.jpg
Views:	2
Size:	35.1 KB
ID:	86987

                    Comment


                    • Hi Morgan.

                      Well, today i changed the wire. Now i use 0,51 mm wire for L1 and L2, and also for the gold ring.
                      I also gave more distance btw L1 and L2. Now is 2 centimeters.
                      On my test i notice a little more distance to detect my AC wires running thru the walls of my house. But if i touch with my fingers the wire that comes from G of 2N3819, sensitivity increases a lot, that the wires on the wall can be detected at a distance of 1 meter and this doesn“t lose directivity from the antenna. Also i detected some kind of static coming from plants outside of my garden and i don“t know if this is normal.
                      When i made the test with my old tv set, detection distance is not to much, about 1 meter. This TV uses flayback and the screen is 14" wide.
                      To know if this is working on gold, what test could i make, cause i suppose that this divise is much more sensitive on gold samples than on AC current?

                      Here is a poor quality video that shows how my zahori is detecting ac currents from my lamp switch



                      Regards and thanks in advance.

                      Nelson


                      Originally posted by Morgan View Post
                      Everything looks normal except the wire around the sample is big,but maybe it works,i think yes,becouse the energy around the gold sample will make it to resonate. The same arrangement you can see inside the head of the Esteban“s Blue PD,in this case the gold sample stay inside the tube.

                      [ATTACH]14725[/ATTACH]

                      Comment


                      • Hi nelson
                        i cant help you since i have same problem with my own zahori, but i am trying to solve this problem and when i solve it, i will post here the result.
                        regards
                        mehdi

                        Comment


                        • Hi and thanks Mehdi.
                          I wich that all friends that are testing zahorie, can share real expirencies.
                          Now tell me if you have the same sound when you pass the detector in front of the lamp switch?
                          Regards and thanks

                          Nelson

                          Originally posted by mehdi View Post
                          Hi nelson
                          i cant help you since i have same problem with my own zahori, but i am trying to solve this problem and when i solve it, i will post here the result.
                          regards
                          mehdi

                          Comment


                          • Hi nelson
                            i can not open the youtube.com because it is bloked in my country, please send me the video to mehdi1m2m@yahoo.com (if it is possible for you)
                            thanks
                            mehdi

                            Comment


                            • I already send you the video split in small files
                              Regards
                              Nelson


                              Originally posted by mehdi View Post
                              Hi nelson
                              i can not open the youtube.com because it is bloked in my country, please send me the video to mehdi1m2m@yahoo.com (if it is possible for you)
                              thanks
                              mehdi

                              Comment


                              • Hi nelson
                                i send you two email please see those.
                                best regards
                                mehdi

                                Comment

                                Working...
                                X