Zahori

[Geo]

The straight face must look to L1 (antenna)

[roccocoin]

hello geo

The straight face must look to L1 (antenna)

hello geo, you are really great in helping me with your answers, i can only say thank you, but you still have to help on antenna l2: one end goes to trimmer r9, and the other end where to mount it? see the photo of l2 antenna I posted and is marked with red color. best regards

[abdou2014]

do not tire, this device does not work, and if there is a secret to make it work, nobody will tell you, I advise you to focus on franco LRL ! Thanks

[roccocoin]

do not tire, this device does not work, and if there is a secret to make it work, nobody will tell you, I advise you to focus on franco LRL ! Thanks

hahahaha i figured it would go so, i also have the components, and logically from that geese you see in the photos eg where do the extremity of l2? there is no explanation, so I thank you for what you are saying, but I already imagined it. frank and a serious person and if he or she does something or something is going to work, it certainly works. ok i do not know now i bought the components, i did the pcb, now the mount then if it does not work the slap against the wall .. hahahahaha but maybe even if wrong you tell me where the l2 is connected? 1 thread I understand that goes to r9 and the other end should I be welded?

[Geo]

hello geo, you are really great in helping me with your answers, i can only say thank you, but you still have to help on antenna l2: one end goes to trimmer r9, and the other end where to mount it? see the photo of l2 antenna I posted and is marked with red color. best regards

The other end of L2 is not connected. The schematic of this detector is an ion detector so this type of antenna is not the best.

Anyway.... you can try it.

[Geo]

I found the schematic.

[abdou2014]

ULTIMATE ION DETECTOR

[roccocoin]

ciao

ULTIMATE ION DETECTOR

hello guys, first thank you for your kindness and kindness in answering me, but in this post posted the negative antenna is seen mounted on the tr2? but tr 2 and a bc 239 .... and a try? thank you

[roccocoin]

hello

hello to all the members of the forum, this and what I'm trying to do

[abdou2014]

GOOD WORK

http://blog.novaeletronica.com.br/en/detector-de-ions/

[roccocoin]

hello abdou

GOOD WORK

http://blog.novaeletronica.com.br/en/detector-de-ions/

hello, then does it need anything? does not it serve to find a treasure or maybe gold? thank you

[abdou2014]

I do not think so !

[roccocoin]

hello da italy

hello everyone, I finished editing the zahori, but there are no "phenomena" that I can not understand: turning on the zahory emits a buzz from the speaker but only if I touch with my hands one end of a wire connected to the speaker, then second point if I raise the zahori from the desk and hold it in my hand does not sound anymore, then third point I tried near a neon lamp and to hear it I have to approach almost to touch the lamp. What could I do to improve and why does it only sound if I touch a wire from the speaker? thanks to all those who are committed to helping me, I would like to find a treasure ....... hahahahhah

[Dubulumach]

New DubZahori. Extreme sensitive differential design.

better quality schematic in attached pdf.

regards
Dubulumach

[Dubulumach]

Designed in DipTrace 3.2

https://diptrace.com/download/download-diptrace