ALONSO PD MISSION ACCOMPLISHED V1,V2

[abdou2014]

Thank you for your help Mr Morgan, is only one antenna sufficient like photo 1, or it is necessary two antennas like 2 ???

[abdou2014]

with the stimulator it is uncontrollable, I do not have in my diagram where I can reduce the sensitivity to stabilize it, it is very important ???

[abdou2014]

Now there are three configurations ?????

[humhum]

no limits for electronic devices, soon it will be new LRL technologies

Yes , so like my High Voltage option , and also with White Noise technologie ...
But with correct info and Building .

[humhum]

Morgan , I think that , if your input is from pin 17 , 18 ,(instead 13) can be get the same result .
here are important others subtleties or details .

[Morgan]

DCH85

Now there are three configurations ?????

no, forget this LRLs, they use diferent antennas,

you need to adapt this radio to your DCH85 project and see for field results, simply connect to the frewquency capacitor 220N receiver in the original antenna place (old model with no radio),and use in the pin 13(in the radio) the antenna with the sample ,not the loop 56pf(this is my other project).

A question, did you already try your DCH85 in a field test???

[Morgan]

DCH85

Now there are three configurations ?????

is this your DCH85 , or using other model?

[Morgan]

DCH85

no, forget this LRLs, they use diferent antennas,

you need to adapt this radio to your DCH85 project and see for field results, simply connect to the frewquency capacitor 220N receiver in the original antenna place (old model with no radio),and use in the pin 13(in the radio) the antenna with the sample ,not the loop 56pf(this is my other project).

A question, did you already try your DCH85 in a field test???

correction, antenna in C23 to the 220pf ,remove the antenna and connect the radio to upgrade the DCH, no needc the transformer that you see in Esteban?s schematic.

[Farid]

Hello Mr. Morgan
Do you sell Alonso PD?
I'm willing to buy it from you for $ 20,000.
I bought the Isaac PD and I am satisfied with it.
I would also like to buy the original Alonso device.
You say the PD project is an old project and it's better not to talk about it.
If so, it's best to sell it to me.
I'll give you $ 20,000 for Alonso PD.

[abdou2014]

no, forget this LRLs, they use diferent antennas,

you need to adapt this radio to your DCH85 project and see for field results, simply connect to the frewquency capacitor 220N receiver in the original antenna place (old model with no radio),and use in the pin 13(in the radio) the antenna with the sample ,not the loop 56pf(this is my other project).

A question, did you already try your DCH85 in a field test???

I have not tried my DCH without TDA in the test field, I read to you in this forum that it was useless without TDA.

then you ask me to test with a configuration number 1 in a photo, a single antenna connected to pin 13 ? I will do !

Yes this is my DCH schematic !

important question, does the stimulator have a role outside the circuit, that is to say an influences on the target, like stimulate it for increase the phenomenon power ? or it's just to excite the receiver coil ?

Thank you Mr Morgan !

[kostas87]

the Alonso PD use the metal detector circuit HeatKit, its a TR/IB sistem, according Esteban a BFO with cristal controler is the best for stability, I want to try but the cristal is hard to find...

here schematic

one with a ready mixer, longer distance L1COIL,L2st. I don't know anything about it but I like it. take a look ..

[Morgan]

DCH85

with the stimulator it is uncontrollable, I do not have in my diagram where I can reduce the sensitivity to stabilize it, it is very important ???

in the old DCH there is a 4K7 external pot for the gain control, but also there is a variable resistor of 47K, change it for one external potentiometer for GAIN and it will be able to control the power using the TDA. And the adj. Cap, C1 (10-70pf)of the radio it will be used to adjust for the correct frequency yo locate the gold, that you must have a field test with gold and silver buried minimum 10 years ago for a very good signal or a object buried 2 years ago you have a very poor signal in 50cm to 1m with the LRL ...
The good DCH from mineoro was the model VC86D

[Morgan]

The original ALONSO PD

Hello Mr. Morgan
Do you sell Alonso PD?
I'm willing to buy it from you for $ 20,000.
I bought the Isaac PD and I am satisfied with it.
I would also like to buy the original Alonso device.
You say the PD project is an old project and it's better not to talk about it.
If so, it's best to sell it to me.
I'll give you $ 20,000 for Alonso PD.

Hello Farid

thats a very good offer for the original Alonso PD, but I want to keep it in memory of the treasures I found with this LRL, the first I have that real work as LRL.

[Morgan]

DCH85

I have not tried my DCH without TDA in the test field, I read to you in this forum that it was useless without TDA.

then you ask me to test with a configuration number 1 in a photo, a single antenna connected to pin 13 ? I will do !

Yes this is my DCH schematic !

important question, does the stimulator have a role outside the circuit, that is to say an influences on the target, like stimulate it for increase the phenomenon power ? or it's just to excite the receiver coil ?

Thank you Mr Morgan !

ok,now I know what DCH you use,the old blue DCH modified by Esteban,I using other model of DCH, your is this one of the schematic, do like this :

3M Potentiometer for TUNING sensitivity

the Resistor 31K on the TDA change for 100K external Pot for FINE TUNING,it should be total left when start the DCH, adjust for beeps with 3M pot ,then stop,and go with 100K fine tuning to let the DCH very sensitive

[abdou2014]

when my LRL did not want to stabilize with TDA, I removed the circuit from the middle lm741 and I connected the tda with another circuit, now it is stable, and i detect a flat metal at 3 cm, I don't know if it is sufficient as a result for the phenomenon ?