ALONSO PD MISSION ACCOMPLISHED V1,V2

[Morgan]

thats right,

and more than 9V , or 9,50V that reduce distance ,

I m talking about distance I get with 2x 9V for each battery(rechargeable) using the passive receiver whitout oscillator for stimulate the RX coil, sure I get more distance using circuit stimullator,or maybe it become unstable,

thanks

[Pahom]

I got this result without a stimulant . But with a stable power supply of 9 volts.

[Morgan]

and field test results ?

[Pahom]

With that receiver, it didn't go to field testing. And there was no polygon, as there is now.

[WM6]

which part increases the distance of detection ,
the sensitivity of the receiver or the power of the transmitter ?


!

Neither of it, if there is no resonance in communication between both.
So magic word is "tuned in resonance".

Without this, we are back to spark transmitter (now forbidden by international law) and
broadband smoggy spark communication.

Hedy Lamarr is beginning with small spark too:

https://www.marketplace.org/2017/11/21/inventor-changed-our-world-and-also-happened-be-famous-hollywood-star/

[Dubulumach]

I get a coil formula for the Alonso PD passive receiver that can detect a 1,5V battery spark 2,20m distance, my question, someone here get this distance or more with the passive receiver ?

Hy Morgan

Play with gap at ferrite. Sensitivity also depend of ferrite type.

Also you need new stimulator oscillator. Original designed has a drift and need many times retune while detecting.

Could you explain more for your UV/IR detection?

ps: PDK 2 is better schematic than PDK 3. You could tune it very well up to some limit, which was ruled by capacitivity of your hand with respect to the ground. If you make electronic tuning it would be one of Top LRLs ever made. For more details contact me at email.

Regards

[humhum]

New type Stimulator

'' Also you need new stimulator oscillator.''

What type is New Stimulator , Vertical position or ??

[Dubulumach]

'' Also you need new stimulator oscillator.''

What type is New Stimulator , Vertical position or ??

Pure analogue sine SIN(x) sequencing oscillator f= 0-200 kHz with lowest THD possible. Very stable, withouth drift and with fine amplitude and phase control from 0....+-Vpp. At the output there should be broadband LF amplifier up to pair of watts. Bandwidth from 0 up to 1Mhz. These freqs. must go in/out without distortion. Prefer A-class.

Helpfulto have frq.meter. Not DSS generator because it has many harmonics in signal. Need 11-th pole filter for aliasing signal to get in close proximity of perfect sinus. Very hard to tune, need 0.1% component tolerance. Forget about DSS.

Position experimentaly.

[Dubulumach]

Magic part of PD Alonso is ferrite. Neither two or more same ferrites exist. What catch the "Halo-Effect" is only ferrite, his subatomic structure. Find radioactive one like Geo, and you would have many hundreds of meter distance, maybe km's.

[Morgan]

PDK-2

Hy Morgan

Play with gap at ferrite. Sensitivity also depend of ferrite type.

Also you need new stimulator oscillator. Original designed has a drift and need many times retune while detecting.

Could you explain more for your UV/IR detection?

ps: PDK 2 is better schematic than PDK 3. You could tune it very well up to some limit, which was ruled by capacitivity of your hand with respect to the ground. If you make electronic tuning it would be one of Top LRLs ever made. For more details contact me at email.

Regards

I get this distance on a spark not using stimulator coil.

about the IR/UV its not my invention, I made some modification, the inventor belong to this forum and not want (for the moment) the project to be clone.

[Pahom]

Good afternoon Morgan! You can find out about the version of the receiving part of the DCX-85 that you use on the LM741?

[brain]

Good afternoon Morgan! You can find out about the version of the receiving part of the DCX-85 that you use on the LM741?

here some TDA FM radios schematics :

Hello there are two events in the morgan FM receiver. The first is the transmitter, that is, the local oscillator. The second is the buyer duty. Do you know the value of the local oscillator when making your settings? You can understand this with two fm radios. Tune one of the FM radio to 103 MHz and change the frequency of the other FM radio. You will see that the fm sound of the 103 mhz radio is muted.

[abdou2014]

I had an experience that looks like this , why two fm receiver ?

i tried with one radio that will have the sound cut off at a specific frequency , and after what?

how to use this experiment to detect the phenomenon? I had a lot of theory , and my radio

detect sudden electromagnetic fields at a distance

[abdou2014]

there is a great experience that comes to you after these results, and that is the key

[brain]

If we can determine the transmitter frequency, we can experiment to evoke this frequency golden phenomenon.

You should publish the fm receiver circuit diagram.