ALONSO PD MISSION ACCOMPLISHED V1,V2

[brain]

The frequency of the fm radio in the 103 MHz transmitter position of the fm radio in the receiver position is around 88 mhz.

[abdou2014]

what do you mean by ( fm radio in the 103 MHz transmitter position) ?

both radio receivers ?

my experience and results are different from yours, my radio detects the phenomenon and

operates like a BFO and electric receiver

[brain]

both radio receivers ?
yes.

There is another frequency that your receiver works like a transmitter in the frequency position.

[abdou2014]

where is the interest ? how used for detection ?

[abdou2014]

my transmitter circulates in the receiver, and calibrated to a critical position

[brain]

you make another from the same buyer. You understand the event. You set the 103 or 104 mhz receiver, in contrast to the other receiver, when you set it to 88 MHz, the fm sound is cut off. Here we can find what frequency it is, we find the phenomenon value for gold.

[abdou2014]

Thank you for sharing your experience

[Geo]

From my experience there isn't special frequency for gold etc... (at bands that we can work!!!). There are some bands with better response or lower noise and nothing else.

[Douglass]

Many devices are made with frequencies x as if there was a selective frequency for a given substance, maybe there is a certain frequency range for a given substance. Within these bands and dominating its forces the gold will be right there .....

[humhum]

From my experience there isn't special frequency for gold etc... (at bands that we can work!!!). There are some bands with better response or lower noise and nothing else.

Dear Geo , İn my experience , I see that have any special frequency for localization .
no find Buried in all lower noise frequency . But here problem is that , I can not measure
this working frequency .

Regards

[brain]

my transmitter circulates in the receiver, and calibrated to a critical position

hello abdou2014 what is the frequency on your tda7000 receiver.

[zakari]

hi all
brian you are right

i get the good result with 104.5 mhz tx and 80 mhz rx

best regard zakari

[abdou2014]

hello abdou2014 what is the frequency on your tda7000 receiver.

there is one thing special with TDA7000 , excuse me but I can't all say

I advise you to do a lot of experiments

[humhum]

The frequency of the fm radio in the 103 MHz transmitter position of the fm radio in the receiver position is around 88 mhz.

When Local OSC (Tx) of one Radio is same with input of other FM Radio in Receive mode
(+ some use 10.7Mhz IF ) , So Radio calibrated for Receiver will stopid noise from Speaker
ssssssssssssssssssssssssssssssssssssssssssssssssss ssssssssssssssssssssssssssssssssssss

[Geo]

From my experimets... i found buried objects with below frequencies...

60Khz,62 Khz, 75Khz, 78Khz, 80Khz, 84Khz, 88Khz, 92Khz, 100Khz, 125Khz, 133Khz, 250Khz, 500Khz, 513Khz, 1Mhz,80Mhz, 84Mhz,110Mhz,438Mhz.
Do you mean that all these frequencies are special frequencies??? or the gold emmits a signal at these frequencies???
Nothing of these....