frquncy

[J_Player]

JP
Thanks much. Sort of hard when one doesn't have the right language.

I have been following this thread and the whole topic has been a source is wonder for me for many years. I tried lots of these various frequencies and the only thing I ever found that was consistent was rust iron when looking for gold but no Au.

Being an experimentalist and willing to try something like this was an education. What is amazing to me is that there are so many companies selling very expensive signal generators, as that is all they are, and so many willing to buy this stuff. If someone is going to try this get a pair of dowsing rods off eBay for $20 and an inexpensive signal generator for less than $150 and test it out. Save lots of money this way. the coat hanger idea is fine but it doesn't give the user enough tactile psychological feedback even though it does the same thing.
Goldfinder

Well, yes.
I think it can cost less than that.
If I believed I could find things with dowsing rods and a signal generator, then I would buy some real brass welding rods and some copper pipe and caps for handles.
And I would buy a 7555 timer and solder it to a breadboard with a few resistors and capacitors, then stick it on the side of a 9v battery for my signal generator.
I could make it extra fancy by adding a switch that would switch between several different frequencies, or even a pot that I could switch on for infinite variation of frequencies.
The whole mess would cost less than $15 USD.
Then I could have hours of fun looking for treasures at any frequency that people tell me is the secret treasure frequency.

From what I saw in Carl's report of the VR-800, this is exactly what they are selling for $1995. http://www.geotech1.com/cgi-bin/page...r800/index.dat

Best wishes,
J_P

[goldfinder]

Thanks JP

This is bulgarian language.
It means:
gold-5.0-5.6 kHz silver-8.7-8.9 kHz copper-11.7 kHz bronze-11.3 kHz iron-17.0-17.8 kHz lead-4.5 kHz aluminum-7.0 kHz
These are the frequencies with which, if the metal is irradiated, it shall enter into resonance and begins to emit the corresponding ions

There is no explanation given or information to show some publication that explains how above numbers have been worked out.


Best wishes,
J_P

JP
Thanks much. Sort of hard when one doesn't have the right language.

I have been following this thread and the whole topic has been a source is wonder for me for many years. I tried lots of these various frequencies and the only thing I ever found that was consistent was rust iron when looking for gold but no Au.

Being an experimentalist and willing to try something like this was an education. What is amazing to me is that there are so many companies selling very expensive signal generators, as that is all they are, and so many willing to buy this stuff. If someone is going to try this get a pair of dowsing rods off eBay for $20 and an inexpensive signal generator for less than $150 and test it out. Save lots of money this way. the coat hanger idea is fine but it doesn't give the user enough tactile psychological feedback even though it does the same thing.
Goldfinder

[J_Player]

I tried several greek to english translators and none worked. Anyone have the translation.
Goldfinder

This is bulgarian language.
It means:
gold-5.0-5.6 kHz silver-8.7-8.9 kHz copper-11.7 kHz bronze-11.3 kHz iron-17.0-17.8 kHz lead-4.5 kHz aluminum-7.0 kHz
These are the frequencies with which, if the metal is irradiated, it shall enter into resonance and begins to emit the corresponding ions

There is no explanation given or information to show some publication that explains how above numbers have been worked out.


Best wishes,
J_P

[WM6]

I tried several greek to english translators and none worked. Anyone have the translation.
Goldfinder

You cannot translate from Bulgarian with Greek-English translator.

[goldfinder]

so what is the translation

I tried several greek to english translators and none worked. Anyone have the translation.
Goldfinder

[Qiaozhi]

Това са честоти със които ако бъде облъчен съответния метал , то той влиза в резонанс и започва да излъчва съответните йони

Please make your posts in English.

http://www.geotech1.com/forums/showthread.php?t=10526

... or provide an English translation.

[wam]

Това са честоти със които ако бъде облъчен съответния метал , то той влиза в резонанс и започва да излъчва съответните йони

Can You make a link to some publication how above numbers have been worked out - any published research report etc. please. Did any one described the procedure how to measure it or verify so it can be confirmed each time by all ?

[1966]

gold-5.0-5.6 kHz silver-8.7-8.9 kHz copper-11.7 kHz bronze-11.3 kHz iron-17.0-17.8 kHz lead-4.5 kHz aluminum-7.0 kHz

Това са честоти със които ако бъде облъчен съответния метал , то той влиза в резонанс и започва да излъчва съответните йони

[wam]

I need gold and silver metals frequencies that are emitted from the Earth??

I can not think about a metal generating EM frequency field and a reason why unless we consider the electrons orbiting atom of gold and this will produce EM field with some unique frequency. Sensing this remotely will be a kind of fantasy.
The other part of theory is that all metals at higher temperature will glow producing light and it means spectrum of EM frequencies. Analyzing this light we can say what kind of metal is it. So, we can say what Sun is made of remotely. Base on this, in theory metal will produce this light in any temperature but if not very hot the intensity of the light is so small that it is not measurable. The next factor is propagation over other matter of this slow intensity.
So remotely speaking it is realistic to consider frequencies absorb or reflected by gold as a "gold frequencies".

[J_Player]

Hi, I propose to use above location to test any alternative LRLs. (and classic MD as well).
Regards,

Ummm...
One problem with this new alternative:

When I read the article I see they discovered a difference in absorbance of specific wavelengths for different kinds of soil.
The absorbance frequencies they are measuring are basically light, into the NIR range which our eyes are not capable of seeing.
In other words, when the surface of the ground absorbs a specific wavelength of light, it reflects a color which happens to be beyond our ability to see.

As an example, the red color which we can see on the photo below of the Australian soil is caused because the soil is absorbing a specific light frequency which is removed from the reflected light.
So we see seen it as red-tinted because the reflected light is weighted in the red frequency after the ground absorbs some higher frequencies than red.
This is exactly what they are talking about in their article, except for colors that are slightly out of our seeing range.
They are saying they discovered that they can see some new colors for surface soil and rocks that we can't see with our eyes alone, by using NIR camera gear.
So they are seeing these NIR colors which are invisible until they use a camera that can see into the NIR range.
Then they these NIR colors help identify certain rocks and soil material.

But the problem is what they are looking at surface colors of different rocks and soil on the ground.
Their discovery is that when there are specific rock formations at the surface, these rock formations will have different reflectance NIR colors.
And these colors of rock formations will tell what kind of rock formations are photographed so we can look for the rock outcrop types that are known to be associated with ore deposits.
They are talking about the color of the soil and rocks on the surface of the ground.
Not about a color that is caused by buried gold, or buried ores or metal things.

What they are saying they discovered is they can use special cameras to extend the range of colors they can see to help identify rock formations.
So when they look at the picture below, they see a few more colors than the simple red tint on the ground when certain kinds of rocks are present on the surface.
Then they know it is likely they might find the ores that are usually found in those kinds of rock formations if they see them in the picture.
Somehow this does not seem to be related to finding buried treasure.
It seems more useful for mining exploration.

Best wishes, J_P

http://www.ga.gov.au/image_cache/GA12286.pdf

[wam]

Hi, I propose to use above location to test any alternative LRLs. (and classic MD as well).
Regards,

[J_Player]

OK, there is some think like gold frequency and LRL recognized by science but it is far away from what LRL enthusiasts or OKM or other fantasy, hobby or businesses do. (Just keep doing It for fun and all will be OK, I support You).
Now top secret The "GOLD FREQUENCY" is about 138.34 THz ( wave 2.167 um).
Ref. http://www.ga.gov.au/image_cache/GA12286.pdf
Never give up.
Regards,

cool...
I almost detected it long range, but I can't quite see that color.
I only see the yellow and red stuff -- too hard to see from long distance.
Maybe with my special filtered NIR LRL camera....
Thanks for the tip.

Best wishes,
J_P

[wam]

The "GOLD FREQUENCY" reviled

OK, there is some think like gold frequency and LRL recognized by science but it is far away from what LRL enthusiasts or OKM or other fantasy, hobby or businesses do. (Just keep doing It for fun and all will be OK, I support You).
Now top secret The "GOLD FREQUENCY" is about 138.34 THz ( wave 2.167 um).
Ref. http://www.ga.gov.au/image_cache/GA12286.pdf
Never give up.
Regards,

[1966]

hi to all
I need a metal frequency table?
I need gold and silver metals frequencies that are emitted from the Earth??
These frequencies are of the type vlf?
please help me?

gold-5.0-5.6 kHz silver-8.7-8.9 kHz copper-11.7 kHz bronze-11.3 kHz iron-17.0-17.8 kHz lead-4.5 kHz aluminum-7.0 kHz

[J_Player]

I think you meant to say unconsciousness.
If no success can be found with 240V, we could always try a 3-phase supply.

However, joking aside ... I don't think mesy64 is understanding this sarcasm. So we should make it clear that we do not believe there are any frequencies that would be useful for his purposes. The whole idea is complete nonsense, and is based on false pseudo-science, whether it is 50kHz, 50Hz, 123456Hz (or who cares), as all of these will give the same effect ... nothing.

Exactly correct...
Of course, you must be careful to make the correct choice... delta or star?
It is more tricky than Alice in wonderland choosing which door.
But we got a hint from Fred's post which was confirmed by his wife...

Seriously there is no treasure frequency.
If a way to locate gold at long distance was explained in detail in this forum, It would not have any thing to do with a frequency.
I know because it has already been done.


Best wishes,
J_P